[PATCH 1/2] arm64: zynqmp: Remove leading 0s from mtd table for spi flashes

[Michal Simek]

Warnings:
arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning
(unit_address_format): Node
/amba/***@ff040000/***@0/***@00000000 unit name should
not have leading 0s
arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning
(unit_address_format): Node
/amba/***@ff050000/***@0/***@00000000 unit name should
not have leading 0s

Signed-off-by: Michal Simek <***@xilinx.com>
---

arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
index ef1b9e573af0..ee7fa27e1e23 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
@@ -92,7 +92,7 @@
spi-max-frequency = <50000000>;
reg = <0>;

- ***@00000000 {
+ ***@0 {
label = "spi0_flash0";
reg = <0x0 0x100000>;
};
@@ -109,7 +109,7 @@
spi-max-frequency = <50000000>;
reg = <0>;

- ***@00000000 {
+ ***@0 {
label = "spi1_flash0";
reg = <0x0 0x100000>;
};

[Michal Simek]

Nodes without reg properties shouldn't be placed in amba node.
Move them out.

Warnings:
arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning (simple_bus_reg):
Node /amba/misc_clk missing or empty reg/ranges property
arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning (simple_bus_reg):
Node /amba/i2c_clk missing or empty reg/ranges property
arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning (simple_bus_reg):
Node /amba/sata_clk missing or empty reg/ranges property
arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning (simple_bus_reg):

Signed-off-by: Michal Simek <***@xilinx.com>
---

arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
index cdc6a437dcc7..c03bde79d7d8 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
@@ -11,7 +11,7 @@
* the License, or (at your option) any later version.
*/

-&amba {
+/ {
misc_clk: misc_clk {
compatible = "fixed-clock";
#clock-cells = <0>;