[PATCH] arm: zynq: Add device-type property for zynq ethernet phy nodes

[Michal Simek]

From: Sai Pavan Boddu <***@xilinx.com>

Mention device-type = "ethernet-phy", as qemu will need this in absence
of compatible.

Signed-off-by: Sai Pavan Boddu <***@xilinx.com>
Signed-off-by: Michal Simek <***@xilinx.com>
---

arch/arm/boot/dts/zynq-parallella.dts | 1 +
arch/arm/boot/dts/zynq-zc702.dts | 1 +
arch/arm/boot/dts/zynq-zc706.dts | 1 +
arch/arm/boot/dts/zynq-zed.dts | 1 +
arch/arm/boot/dts/zynq-zybo.dts | 1 +
5 files changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts
index 64a6390fc501..77f6f10bf685 100644
--- a/arch/arm/boot/dts/zynq-parallella.dts
+++ b/arch/arm/boot/dts/zynq-parallella.dts
@@ -54,6 +54,7 @@
compatible = "ethernet-phy-id0141.0e90",
"ethernet-phy-ieee802.3-c22";
reg = <0>;
+ device_type = "ethernet-phy";
marvell,reg-init = <0x3 0x10 0xff00 0x1e>,
<0x3 0x11 0xfff0 0xa>;
};
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index 2f99500faae5..a096275d903d 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -97,6 +97,7 @@

ethernet_phy: ethernet-***@7 {
reg = <7>;
+ device_type = "ethernet-phy";
};
};

diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index 7283037ce9cb..689ec9d6f7b9 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -53,6 +53,7 @@

ethernet_phy: ethernet-***@7 {
reg = <7>;
+ device_type = "ethernet-phy";
};
};

diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts
index 35e631d86b12..c6a5749c8930 100644
--- a/arch/arm/boot/dts/zynq-zed.dts
+++ b/arch/arm/boot/dts/zynq-zed.dts
@@ -50,6 +50,7 @@

ethernet_phy: ethernet-***@0 {
reg = <0>;
+ device_type = "ethernet-phy";
};
};

diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts
index e19b58155d82..8b42fb199a8e 100644
--- a/arch/arm/boot/dts/zynq-zybo.dts
+++ b/arch/arm/boot/dts/zynq-zybo.dts
@@ -51,6 +51,7 @@

ethernet_phy: ethernet-***@0 {
reg = <0>;
+ device_type = "ethernet-phy";
};
};