Discussion:
[PATCH 1/2] [ARM] pxa/sgh_i900: Basic support for the Samsung SGH-i900 (Omnia) phone.
(too old to reply)
y***@datenfreihafen.org
2009-06-13 23:02:53 UTC
Permalink
From: Stefan Schmidt <***@datenfreihafen.org>

PWM backlight, framebuffer, internal SD storage and external SD storage are
working. Needs an up-to-date mach-types file for machine ID 2276.

Signed-off-by: Stefan Schmidt <***@datenfreihafen.org>
---
MAINTAINERS | 8 ++
arch/arm/mach-pxa/Kconfig | 5 +
arch/arm/mach-pxa/Makefile | 1 +
arch/arm/mach-pxa/sgh_i900.c | 178 ++++++++++++++++++++++++++++++++++++++++++
4 files changed, 192 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-pxa/sgh_i900.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 90f8128..ed4f046 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -818,6 +818,14 @@ F: arch/arm/mach-rpc/
F: drivers/net/arm/ether*
F: drivers/scsi/arm/

+ARM/SAMSUNG SGH i900 MACHINE SUPPORT (Omnia)
+P: Stefan Schmidt
+M: ***@datenfreihafen.org
+W: http://gnufiish.org/trac/wiki/Samsung_Omnia
+S: Maintained
+T: git git://git.openezx.org/sgh-i900.git
+F: arch/arm/mach-pxa/sgh_i900.c
+
ARM/SHARK MACHINE SUPPORT
P: Alexander Schulz
M: ***@shark-linux.de
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 17d3fbd..a35c4a6 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -281,6 +281,11 @@ config MACH_ZYLONITE
select PXA_SSP
select HAVE_PWM

+config MACH_SGH_i900
+ bool "Samsung SGH-i900 (Omnia) phone"
+ select PXA3xx
+ select HAVE_PWM
+
config MACH_LITTLETON
bool "PXA3xx Form Factor Platform (aka Littleton)"
select PXA3xx
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 682dbf4..10d11da 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -69,6 +69,7 @@ ifeq ($(CONFIG_MACH_ZYLONITE),y)
obj-$(CONFIG_CPU_PXA300) += zylonite_pxa300.o
obj-$(CONFIG_CPU_PXA320) += zylonite_pxa320.o
endif
+obj-$(CONFIG_MACH_SGH_i900) += sgh_i900.o
obj-$(CONFIG_MACH_LITTLETON) += littleton.o
obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
obj-$(CONFIG_MACH_SAAR) += saar.o
diff --git a/arch/arm/mach-pxa/sgh_i900.c b/arch/arm/mach-pxa/sgh_i900.c
new file mode 100644
index 0000000..ff3f113
--- /dev/null
+++ b/arch/arm/mach-pxa/sgh_i900.c
@@ -0,0 +1,178 @@
+/**
+ * Support for the PXA312 based Samsung SGH-i900 (Omnia)
+ *
+ * Copyright (C) 2009 Stefan Schmidt <***@datenfreihafen.org>
+ *
+ * Based on zylonite.c Copyright (C) 2006 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/pwm_backlight.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/pxafb.h>
+#include <mach/zylonite.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
+#include "generic.h"
+
+#define MAX_SLOTS 3
+struct platform_mmc_slot sgh_i900_mmc_slot[MAX_SLOTS];
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct platform_pwm_backlight_data sgh_i900_backlight_data = {
+ .pwm_id = 3,
+ .max_brightness = 100,
+ .dft_brightness = 100,
+ .pwm_period_ns = 10000,
+};
+
+static struct platform_device sgh_i900_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm1.dev,
+ .platform_data = &sgh_i900_backlight_data,
+ },
+};
+
+static struct pxafb_mode_info sgh_i900_mode = {
+ .pixclock = 96153,
+ .xres = 240,
+ .yres = 400,
+ .bpp = 16,
+ .hsync_len = 8,
+ .left_margin = 8,
+ .right_margin = 8,
+ .vsync_len = 4,
+ .upper_margin = 38,
+ .lower_margin = 38,
+ .sync = 0,
+};
+
+static struct pxafb_mach_info sgh_i900_lcd_info = {
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void __init sgh_i900_init_lcd(void)
+{
+ platform_device_register(&sgh_i900_backlight_device);
+
+ sgh_i900_lcd_info.modes = &sgh_i900_mode;
+
+ set_pxa_fb_info(&sgh_i900_lcd_info);
+}
+#else
+static inline void sgh_i900_init_lcd(void) {}
+#endif
+
+#if defined(CONFIG_MMC)
+static int sgh_i900_mci_ro(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ return gpio_get_value(sgh_i900_mmc_slot[pdev->id].gpio_wp);
+}
+
+static int sgh_i900_mci_init(struct device *dev,
+ irq_handler_t sgh_i900_detect_int,
+ void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ int err, cd_irq, gpio_cd, gpio_wp;
+
+ cd_irq = gpio_to_irq(sgh_i900_mmc_slot[pdev->id].gpio_cd);
+ gpio_cd = sgh_i900_mmc_slot[pdev->id].gpio_cd;
+ gpio_wp = sgh_i900_mmc_slot[pdev->id].gpio_wp;
+
+ /*
+ * setup GPIO for SGH-i900 MMC controller
+ */
+ err = gpio_request(gpio_cd, "mmc card detect");
+ if (err)
+ goto err_request_cd;
+ gpio_direction_input(gpio_cd);
+
+ err = gpio_request(gpio_wp, "mmc write protect");
+ if (err)
+ goto err_request_wp;
+ gpio_direction_input(gpio_wp);
+
+ err = request_irq(cd_irq, sgh_i900_detect_int,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "%s: MMC/SD/SDIO: "
+ "can't request card detect IRQ\n", __func__);
+ goto err_request_irq;
+ }
+
+ return 0;
+
+err_request_irq:
+ gpio_free(gpio_wp);
+err_request_wp:
+ gpio_free(gpio_cd);
+err_request_cd:
+ return err;
+}
+
+static void sgh_i900_mci_exit(struct device *dev, void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ int cd_irq, gpio_cd, gpio_wp;
+
+ cd_irq = gpio_to_irq(sgh_i900_mmc_slot[pdev->id].gpio_cd);
+ gpio_cd = sgh_i900_mmc_slot[pdev->id].gpio_cd;
+ gpio_wp = sgh_i900_mmc_slot[pdev->id].gpio_wp;
+
+ free_irq(cd_irq, data);
+ gpio_free(gpio_cd);
+ gpio_free(gpio_wp);
+}
+
+static struct pxamci_platform_data sgh_i900_mci_platform_data = {
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = sgh_i900_mci_init,
+ .exit = sgh_i900_mci_exit,
+ .get_ro = sgh_i900_mci_ro,
+};
+
+static struct pxamci_platform_data sgh_i900_mci2_platform_data = {
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+};
+
+static void __init sgh_i900_init_mmc(void)
+{
+ pxa_set_mci_info(&sgh_i900_mci_platform_data);
+ pxa3xx_set_mci2_info(&sgh_i900_mci2_platform_data);
+ pxa3xx_set_mci3_info(&sgh_i900_mci_platform_data);
+}
+#else
+static inline void sgh_i900_init_mmc(void) {}
+#endif
+
+static void __init sgh_i900_init(void)
+{
+ sgh_i900_init_lcd();
+ sgh_i900_init_mmc();
+}
+
+MACHINE_START(SGH_I900, "Samsung SGH-i900 (Omnia) phone")
+ .phys_io = 0x40000000,
+ .boot_params = 0xa0000100,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa3xx_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = sgh_i900_init,
+MACHINE_END
--
1.6.3.1


-------------------------------------------------------------------
List admin: http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm-kernel
FAQ: http://www.arm.linux.org.uk/mailinglists/faq.php
Etiquette: http://www.arm.linux.org.uk/mailinglists/etiquette.php
y***@datenfreihafen.org
2009-06-13 23:02:54 UTC
Permalink
From: Stefan Schmidt <***@datenfreihafen.org>

Defconfig with known-to-work settings for the sgh_i900.

Signed-off-by: Stefan Schmidt <***@datenfreihafen.org>
---
arch/arm/configs/sgh_i900_defconfig | 1254 +++++++++++++++++++++++++++++++++++
1 files changed, 1254 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/configs/sgh_i900_defconfig

diff --git a/arch/arm/configs/sgh_i900_defconfig b/arch/arm/configs/sgh_i900_defconfig
new file mode 100644
index 0000000..7da708e
--- /dev/null
+++ b/arch/arm/configs/sgh_i900_defconfig
@@ -0,0 +1,1254 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Sat Jun 13 15:32:28 2009
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=18
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Supported PXA3xx Processor Variants
+#
+CONFIG_CPU_PXA300=y
+CONFIG_CPU_PXA310=y
+CONFIG_CPU_PXA320=y
+# CONFIG_CPU_PXA930 is not set
+# CONFIG_CPU_PXA935 is not set
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
+# CONFIG_MACH_ZYLONITE is not set
+CONFIG_MACH_SGH_i900=y
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_CSB726 is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA3xx=y
+CONFIG_PXA_SSP=y
+CONFIG_PXA_PWM=m
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_XSC3L2=y
+CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfs/rootfs/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,38400 mem=64M debug"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=y
+# CONFIG_LIBERTAS_SDIO is not set
+# CONFIG_LIBERTAS_SPI is not set
+CONFIG_LIBERTAS_DEBUG=y
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_WM97XX=y
+# CONFIG_TOUCHSCREEN_WM9705 is not set
+# CONFIG_TOUCHSCREEN_WM9712 is not set
+CONFIG_TOUCHSCREEN_WM9713=y
+# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PXA is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_PXA2XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_SOC_CAMERA=m
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+# CONFIG_SOC_CAMERA_MT9M111 is not set
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+CONFIG_SOC_CAMERA_PLATFORM=m
+# CONFIG_SOC_CAMERA_OV772X is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+CONFIG_FB_PXA_OVERLAY=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=m
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_PXA2XX_PCM=y
+CONFIG_SND_PXA2XX_LIB=y
+CONFIG_SND_PXA2XX_LIB_AC97=y
+CONFIG_SND_PXA2XX_AC97=y
+CONFIG_SND_SPI=y
+CONFIG_SND_SOC=y
+CONFIG_SND_PXA2XX_SOC=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+CONFIG_USB_GADGET_M66592=y
+CONFIG_USB_M66592=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+# CONFIG_LEDS_CLASS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGERS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SA1100 is not set
+CONFIG_RTC_DRV_PXA=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
--
1.6.3.1


-------------------------------------------------------------------
List admin: http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm-kernel
FAQ: http://www.arm.linux.org.uk/mailinglists/faq.php
Etiquette: http://www.arm.linux.org.uk/mailinglists/etiquette.php
y***@datenfreihafen.org
2009-06-13 23:04:07 UTC
Permalink
From: Stefan Schmidt <***@datenfreihafen.org>

Add file entry for easier mainatiner detection and make SCM more visible.

Signed-off-by: Stefan Schmidt <***@datenfreihafen.org>
---
MAINTAINERS | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index ed4f046..57d1f3f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -646,6 +646,8 @@ M: ***@openezx.org
L: openezx-***@lists.openezx.org (subscribers-only)
W: http://www.openezx.org/
S: Maintained
+T: topgit git://git.openezx.org/openezx.git
+F: arch/arm/mach-pxa/ezx.c

ARM/FARADAY FA526 PORT
P: Paulius Zaleckas
--
1.6.3.1


-------------------------------------------------------------------
List admin: http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm-kernel
FAQ: http://www.arm.linux.org.uk/mailinglists/faq.php
Etiquette: http://www.arm.linux.org.uk/mailinglists/etiquette.php
Stefan Schmidt
2009-06-13 23:08:12 UTC
Permalink
Defconfig with known-to-work settings for the sgh_i900.

Signed-off-by: Stefan Schmidt <***@datenfreihafen.org>
---
arch/arm/configs/sgh_i900_defconfig | 1254 +++++++++++++++++++++++++++++++++++
1 files changed, 1254 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/configs/sgh_i900_defconfig

diff --git a/arch/arm/configs/sgh_i900_defconfig b/arch/arm/configs/sgh_i900_defconfig
new file mode 100644
index 0000000..7da708e
--- /dev/null
+++ b/arch/arm/configs/sgh_i900_defconfig
@@ -0,0 +1,1254 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Sat Jun 13 15:32:28 2009
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=18
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Supported PXA3xx Processor Variants
+#
+CONFIG_CPU_PXA300=y
+CONFIG_CPU_PXA310=y
+CONFIG_CPU_PXA320=y
+# CONFIG_CPU_PXA930 is not set
+# CONFIG_CPU_PXA935 is not set
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
+# CONFIG_MACH_ZYLONITE is not set
+CONFIG_MACH_SGH_i900=y
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_CSB726 is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA3xx=y
+CONFIG_PXA_SSP=y
+CONFIG_PXA_PWM=m
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_XSC3L2=y
+CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfs/rootfs/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,38400 mem=64M debug"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=y
+# CONFIG_LIBERTAS_SDIO is not set
+# CONFIG_LIBERTAS_SPI is not set
+CONFIG_LIBERTAS_DEBUG=y
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_WM97XX=y
+# CONFIG_TOUCHSCREEN_WM9705 is not set
+# CONFIG_TOUCHSCREEN_WM9712 is not set
+CONFIG_TOUCHSCREEN_WM9713=y
+# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PXA is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_PXA2XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_SOC_CAMERA=m
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+# CONFIG_SOC_CAMERA_MT9M111 is not set
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+CONFIG_SOC_CAMERA_PLATFORM=m
+# CONFIG_SOC_CAMERA_OV772X is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+CONFIG_FB_PXA_OVERLAY=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=m
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_PXA2XX_PCM=y
+CONFIG_SND_PXA2XX_LIB=y
+CONFIG_SND_PXA2XX_LIB_AC97=y
+CONFIG_SND_PXA2XX_AC97=y
+CONFIG_SND_SPI=y
+CONFIG_SND_SOC=y
+CONFIG_SND_PXA2XX_SOC=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+CONFIG_USB_GADGET_M66592=y
+CONFIG_USB_M66592=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+# CONFIG_LEDS_CLASS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGERS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SA1100 is not set
+CONFIG_RTC_DRV_PXA=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
--
1.6.3.1


-------------------------------------------------------------------
List admin: http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm-kernel
FAQ: http://www.arm.linux.org.uk/mailinglists/faq.php
Etiquette: http://www.arm.linux.org.uk/mailinglists/etiquette.php
Stefan Schmidt
2009-06-13 23:08:11 UTC
Permalink
PWM backlight, framebuffer, internal SD storage and external SD storage are
working. Needs an up-to-date mach-types file for machine ID 2276.

Signed-off-by: Stefan Schmidt <***@datenfreihafen.org>
---
MAINTAINERS | 8 ++
arch/arm/mach-pxa/Kconfig | 5 +
arch/arm/mach-pxa/Makefile | 1 +
arch/arm/mach-pxa/sgh_i900.c | 178 ++++++++++++++++++++++++++++++++++++++++++
4 files changed, 192 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-pxa/sgh_i900.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 90f8128..ed4f046 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -818,6 +818,14 @@ F: arch/arm/mach-rpc/
F: drivers/net/arm/ether*
F: drivers/scsi/arm/

+ARM/SAMSUNG SGH i900 MACHINE SUPPORT (Omnia)
+P: Stefan Schmidt
+M: ***@datenfreihafen.org
+W: http://gnufiish.org/trac/wiki/Samsung_Omnia
+S: Maintained
+T: git git://git.openezx.org/sgh-i900.git
+F: arch/arm/mach-pxa/sgh_i900.c
+
ARM/SHARK MACHINE SUPPORT
P: Alexander Schulz
M: ***@shark-linux.de
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 17d3fbd..a35c4a6 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -281,6 +281,11 @@ config MACH_ZYLONITE
select PXA_SSP
select HAVE_PWM

+config MACH_SGH_i900
+ bool "Samsung SGH-i900 (Omnia) phone"
+ select PXA3xx
+ select HAVE_PWM
+
config MACH_LITTLETON
bool "PXA3xx Form Factor Platform (aka Littleton)"
select PXA3xx
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 682dbf4..10d11da 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -69,6 +69,7 @@ ifeq ($(CONFIG_MACH_ZYLONITE),y)
obj-$(CONFIG_CPU_PXA300) += zylonite_pxa300.o
obj-$(CONFIG_CPU_PXA320) += zylonite_pxa320.o
endif
+obj-$(CONFIG_MACH_SGH_i900) += sgh_i900.o
obj-$(CONFIG_MACH_LITTLETON) += littleton.o
obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
obj-$(CONFIG_MACH_SAAR) += saar.o
diff --git a/arch/arm/mach-pxa/sgh_i900.c b/arch/arm/mach-pxa/sgh_i900.c
new file mode 100644
index 0000000..ff3f113
--- /dev/null
+++ b/arch/arm/mach-pxa/sgh_i900.c
@@ -0,0 +1,178 @@
+/**
+ * Support for the PXA312 based Samsung SGH-i900 (Omnia)
+ *
+ * Copyright (C) 2009 Stefan Schmidt <***@datenfreihafen.org>
+ *
+ * Based on zylonite.c Copyright (C) 2006 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/pwm_backlight.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/pxafb.h>
+#include <mach/zylonite.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
+#include "generic.h"
+
+#define MAX_SLOTS 3
+struct platform_mmc_slot sgh_i900_mmc_slot[MAX_SLOTS];
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct platform_pwm_backlight_data sgh_i900_backlight_data = {
+ .pwm_id = 3,
+ .max_brightness = 100,
+ .dft_brightness = 100,
+ .pwm_period_ns = 10000,
+};
+
+static struct platform_device sgh_i900_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm1.dev,
+ .platform_data = &sgh_i900_backlight_data,
+ },
+};
+
+static struct pxafb_mode_info sgh_i900_mode = {
+ .pixclock = 96153,
+ .xres = 240,
+ .yres = 400,
+ .bpp = 16,
+ .hsync_len = 8,
+ .left_margin = 8,
+ .right_margin = 8,
+ .vsync_len = 4,
+ .upper_margin = 38,
+ .lower_margin = 38,
+ .sync = 0,
+};
+
+static struct pxafb_mach_info sgh_i900_lcd_info = {
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void __init sgh_i900_init_lcd(void)
+{
+ platform_device_register(&sgh_i900_backlight_device);
+
+ sgh_i900_lcd_info.modes = &sgh_i900_mode;
+
+ set_pxa_fb_info(&sgh_i900_lcd_info);
+}
+#else
+static inline void sgh_i900_init_lcd(void) {}
+#endif
+
+#if defined(CONFIG_MMC)
+static int sgh_i900_mci_ro(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ return gpio_get_value(sgh_i900_mmc_slot[pdev->id].gpio_wp);
+}
+
+static int sgh_i900_mci_init(struct device *dev,
+ irq_handler_t sgh_i900_detect_int,
+ void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ int err, cd_irq, gpio_cd, gpio_wp;
+
+ cd_irq = gpio_to_irq(sgh_i900_mmc_slot[pdev->id].gpio_cd);
+ gpio_cd = sgh_i900_mmc_slot[pdev->id].gpio_cd;
+ gpio_wp = sgh_i900_mmc_slot[pdev->id].gpio_wp;
+
+ /*
+ * setup GPIO for SGH-i900 MMC controller
+ */
+ err = gpio_request(gpio_cd, "mmc card detect");
+ if (err)
+ goto err_request_cd;
+ gpio_direction_input(gpio_cd);
+
+ err = gpio_request(gpio_wp, "mmc write protect");
+ if (err)
+ goto err_request_wp;
+ gpio_direction_input(gpio_wp);
+
+ err = request_irq(cd_irq, sgh_i900_detect_int,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "%s: MMC/SD/SDIO: "
+ "can't request card detect IRQ\n", __func__);
+ goto err_request_irq;
+ }
+
+ return 0;
+
+err_request_irq:
+ gpio_free(gpio_wp);
+err_request_wp:
+ gpio_free(gpio_cd);
+err_request_cd:
+ return err;
+}
+
+static void sgh_i900_mci_exit(struct device *dev, void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ int cd_irq, gpio_cd, gpio_wp;
+
+ cd_irq = gpio_to_irq(sgh_i900_mmc_slot[pdev->id].gpio_cd);
+ gpio_cd = sgh_i900_mmc_slot[pdev->id].gpio_cd;
+ gpio_wp = sgh_i900_mmc_slot[pdev->id].gpio_wp;
+
+ free_irq(cd_irq, data);
+ gpio_free(gpio_cd);
+ gpio_free(gpio_wp);
+}
+
+static struct pxamci_platform_data sgh_i900_mci_platform_data = {
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = sgh_i900_mci_init,
+ .exit = sgh_i900_mci_exit,
+ .get_ro = sgh_i900_mci_ro,
+};
+
+static struct pxamci_platform_data sgh_i900_mci2_platform_data = {
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+};
+
+static void __init sgh_i900_init_mmc(void)
+{
+ pxa_set_mci_info(&sgh_i900_mci_platform_data);
+ pxa3xx_set_mci2_info(&sgh_i900_mci2_platform_data);
+ pxa3xx_set_mci3_info(&sgh_i900_mci_platform_data);
+}
+#else
+static inline void sgh_i900_init_mmc(void) {}
+#endif
+
+static void __init sgh_i900_init(void)
+{
+ sgh_i900_init_lcd();
+ sgh_i900_init_mmc();
+}
+
+MACHINE_START(SGH_I900, "Samsung SGH-i900 (Omnia) phone")
+ .phys_io = 0x40000000,
+ .boot_params = 0xa0000100,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa3xx_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = sgh_i900_init,
+MACHINE_END
--
1.6.3.1


-------------------------------------------------------------------
List admin: http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm-kernel
FAQ: http://www.arm.linux.org.uk/mailinglists/faq.php
Etiquette: http://www.arm.linux.org.uk/mailinglists/etiquette.php
Stefan Schmidt
2009-06-16 18:19:03 UTC
Permalink
Hello.
Post by y***@datenfreihafen.org
PWM backlight, framebuffer, internal SD storage and external SD storage are
working. Needs an up-to-date mach-types file for machine ID 2276.
Eric, just to clarify it. This new machine was _not_ send for this merge window.
I realized a bit late that it is open and your stress level will be high due to
it. Just ignore this one until after the windows closes.

regards
Stefan Schmidt

-------------------------------------------------------------------
List admin: http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm-kernel
FAQ: http://www.arm.linux.org.uk/mailinglists/faq.php
Etiquette: http://www.arm.linux.org.uk/mailinglists/etiquette.php
Antonio Ospite
2009-06-20 10:17:07 UTC
Permalink
Hi Stefan, here are some little style things I noticed.

On Sun, 14 Jun 2009 01:08:11 +0200
Post by y***@datenfreihafen.org
PWM backlight, framebuffer, internal SD storage and external SD storage are
working. Needs an up-to-date mach-types file for machine ID 2276.
---
MAINTAINERS | 8 ++
arch/arm/mach-pxa/Kconfig | 5 +
arch/arm/mach-pxa/Makefile | 1 +
arch/arm/mach-pxa/sgh_i900.c | 178 ++++++++++++++++++++++++++++++++++++++++++
4 files changed, 192 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-pxa/sgh_i900.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 90f8128..ed4f046 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -818,6 +818,14 @@ F: arch/arm/mach-rpc/
F: drivers/net/arm/ether*
F: drivers/scsi/arm/
+ARM/SAMSUNG SGH i900 MACHINE SUPPORT (Omnia)
+P: Stefan Schmidt
+W: http://gnufiish.org/trac/wiki/Samsung_Omnia
+S: Maintained
+T: git git://git.openezx.org/sgh-i900.git
+F: arch/arm/mach-pxa/sgh_i900.c
+
ARM/SHARK MACHINE SUPPORT
P: Alexander Schulz
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 17d3fbd..a35c4a6 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -281,6 +281,11 @@ config MACH_ZYLONITE
select PXA_SSP
select HAVE_PWM
+config MACH_SGH_i900
+ bool "Samsung SGH-i900 (Omnia) phone"
+ select PXA3xx
+ select HAVE_PWM
+
config MACH_LITTLETON
bool "PXA3xx Form Factor Platform (aka Littleton)"
select PXA3xx
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 682dbf4..10d11da 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -69,6 +69,7 @@ ifeq ($(CONFIG_MACH_ZYLONITE),y)
obj-$(CONFIG_CPU_PXA300) += zylonite_pxa300.o
obj-$(CONFIG_CPU_PXA320) += zylonite_pxa320.o
endif
+obj-$(CONFIG_MACH_SGH_i900) += sgh_i900.o
obj-$(CONFIG_MACH_LITTLETON) += littleton.o
obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
obj-$(CONFIG_MACH_SAAR) += saar.o
diff --git a/arch/arm/mach-pxa/sgh_i900.c b/arch/arm/mach-pxa/sgh_i900.c
new file mode 100644
index 0000000..ff3f113
--- /dev/null
+++ b/arch/arm/mach-pxa/sgh_i900.c
@@ -0,0 +1,178 @@
+/**
+ * Support for the PXA312 based Samsung SGH-i900 (Omnia)
+ *
+ *
+ * Based on zylonite.c Copyright (C) 2006 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/pwm_backlight.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/pxafb.h>
+#include <mach/zylonite.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
+#include "generic.h"
+
+#define MAX_SLOTS 3
+struct platform_mmc_slot sgh_i900_mmc_slot[MAX_SLOTS];
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct platform_pwm_backlight_data sgh_i900_backlight_data = {
+ .pwm_id = 3,
+ .max_brightness = 100,
+ .dft_brightness = 100,
+ .pwm_period_ns = 10000,
+};
Fix formatting here.
Post by y***@datenfreihafen.org
+
+static struct platform_device sgh_i900_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm1.dev,
+ .platform_data = &sgh_i900_backlight_data,
+ },
+};
+
+static struct pxafb_mode_info sgh_i900_mode = {
+ .pixclock = 96153,
+ .xres = 240,
+ .yres = 400,
+ .bpp = 16,
+ .hsync_len = 8,
+ .left_margin = 8,
+ .right_margin = 8,
+ .vsync_len = 4,
+ .upper_margin = 38,
+ .lower_margin = 38,
+ .sync = 0,
+};
Ditto.
Post by y***@datenfreihafen.org
+
+static struct pxafb_mach_info sgh_i900_lcd_info = {
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void __init sgh_i900_init_lcd(void)
+{
+ platform_device_register(&sgh_i900_backlight_device);
+
+ sgh_i900_lcd_info.modes = &sgh_i900_mode;
+
+ set_pxa_fb_info(&sgh_i900_lcd_info);
+}
+#else
+static inline void sgh_i900_init_lcd(void) {}
+#endif
+
+#if defined(CONFIG_MMC)
+static int sgh_i900_mci_ro(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ return gpio_get_value(sgh_i900_mmc_slot[pdev->id].gpio_wp);
+}
+
+static int sgh_i900_mci_init(struct device *dev,
+ irq_handler_t sgh_i900_detect_int,
+ void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ int err, cd_irq, gpio_cd, gpio_wp;
+
+ cd_irq = gpio_to_irq(sgh_i900_mmc_slot[pdev->id].gpio_cd);
+ gpio_cd = sgh_i900_mmc_slot[pdev->id].gpio_cd;
+ gpio_wp = sgh_i900_mmc_slot[pdev->id].gpio_wp;
+
+ /*
+ * setup GPIO for SGH-i900 MMC controller
+ */
+ err = gpio_request(gpio_cd, "mmc card detect");
+ if (err)
+ goto err_request_cd;
+ gpio_direction_input(gpio_cd);
+
+ err = gpio_request(gpio_wp, "mmc write protect");
+ if (err)
+ goto err_request_wp;
+ gpio_direction_input(gpio_wp);
+
+ err = request_irq(cd_irq, sgh_i900_detect_int,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "%s: MMC/SD/SDIO: "
+ "can't request card detect IRQ\n", __func__);
+ goto err_request_irq;
+ }
+
+ return 0;
+
+ gpio_free(gpio_wp);
+ gpio_free(gpio_cd);
+ return err;
+}
+
+static void sgh_i900_mci_exit(struct device *dev, void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ int cd_irq, gpio_cd, gpio_wp;
+
+ cd_irq = gpio_to_irq(sgh_i900_mmc_slot[pdev->id].gpio_cd);
+ gpio_cd = sgh_i900_mmc_slot[pdev->id].gpio_cd;
+ gpio_wp = sgh_i900_mmc_slot[pdev->id].gpio_wp;
+
+ free_irq(cd_irq, data);
+ gpio_free(gpio_cd);
+ gpio_free(gpio_wp);
+}
+
+static struct pxamci_platform_data sgh_i900_mci_platform_data = {
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = sgh_i900_mci_init,
+ .exit = sgh_i900_mci_exit,
+ .get_ro = sgh_i900_mci_ro,
+};
+
+static struct pxamci_platform_data sgh_i900_mci2_platform_data = {
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+};
+
+static void __init sgh_i900_init_mmc(void)
+{
+ pxa_set_mci_info(&sgh_i900_mci_platform_data);
+ pxa3xx_set_mci2_info(&sgh_i900_mci2_platform_data);
+ pxa3xx_set_mci3_info(&sgh_i900_mci_platform_data);
+}
+#else
+static inline void sgh_i900_init_mmc(void) {}
+#endif
+
+static void __init sgh_i900_init(void)
+{
+ sgh_i900_init_lcd();
+ sgh_i900_init_mmc();
+}
+
+MACHINE_START(SGH_I900, "Samsung SGH-i900 (Omnia) phone")
+ .phys_io = 0x40000000,
+ .boot_params = 0xa0000100,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa3xx_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = sgh_i900_init,
+MACHINE_END
Ditto.

Ciao ciao,
Antonio
--
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing in e-mail?

Web site: http://www.studenti.unina.it/~ospite
Public key: http://www.studenti.unina.it/~ospite/aopubkey.asc
Stefan Schmidt
2009-06-20 11:56:21 UTC
Permalink
Hello.
Post by Antonio Ospite
Hi Stefan, here are some little style things I noticed.
Thanks. All of them looked fine with my vimrc. Will fix my setup before
submitting it the next time. Waiting for a bit more feedback before doing this.
At least until the merge window is over and people have more time again. (/me
makes a mental note that the merge window is a pretty bad idea to submit new
stuff)

regards
Stefan Schmidt
Post by Antonio Ospite
On Sun, 14 Jun 2009 01:08:11 +0200
Post by y***@datenfreihafen.org
PWM backlight, framebuffer, internal SD storage and external SD storage are
working. Needs an up-to-date mach-types file for machine ID 2276.
---
MAINTAINERS | 8 ++
arch/arm/mach-pxa/Kconfig | 5 +
arch/arm/mach-pxa/Makefile | 1 +
arch/arm/mach-pxa/sgh_i900.c | 178 ++++++++++++++++++++++++++++++++++++++++++
4 files changed, 192 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-pxa/sgh_i900.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 90f8128..ed4f046 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -818,6 +818,14 @@ F: arch/arm/mach-rpc/
F: drivers/net/arm/ether*
F: drivers/scsi/arm/
+ARM/SAMSUNG SGH i900 MACHINE SUPPORT (Omnia)
+P: Stefan Schmidt
+W: http://gnufiish.org/trac/wiki/Samsung_Omnia
+S: Maintained
+T: git git://git.openezx.org/sgh-i900.git
+F: arch/arm/mach-pxa/sgh_i900.c
+
ARM/SHARK MACHINE SUPPORT
P: Alexander Schulz
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 17d3fbd..a35c4a6 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -281,6 +281,11 @@ config MACH_ZYLONITE
select PXA_SSP
select HAVE_PWM
+config MACH_SGH_i900
+ bool "Samsung SGH-i900 (Omnia) phone"
+ select PXA3xx
+ select HAVE_PWM
+
config MACH_LITTLETON
bool "PXA3xx Form Factor Platform (aka Littleton)"
select PXA3xx
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 682dbf4..10d11da 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -69,6 +69,7 @@ ifeq ($(CONFIG_MACH_ZYLONITE),y)
obj-$(CONFIG_CPU_PXA300) += zylonite_pxa300.o
obj-$(CONFIG_CPU_PXA320) += zylonite_pxa320.o
endif
+obj-$(CONFIG_MACH_SGH_i900) += sgh_i900.o
obj-$(CONFIG_MACH_LITTLETON) += littleton.o
obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
obj-$(CONFIG_MACH_SAAR) += saar.o
diff --git a/arch/arm/mach-pxa/sgh_i900.c b/arch/arm/mach-pxa/sgh_i900.c
new file mode 100644
index 0000000..ff3f113
--- /dev/null
+++ b/arch/arm/mach-pxa/sgh_i900.c
@@ -0,0 +1,178 @@
+/**
+ * Support for the PXA312 based Samsung SGH-i900 (Omnia)
+ *
+ *
+ * Based on zylonite.c Copyright (C) 2006 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/pwm_backlight.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/pxafb.h>
+#include <mach/zylonite.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
+#include "generic.h"
+
+#define MAX_SLOTS 3
+struct platform_mmc_slot sgh_i900_mmc_slot[MAX_SLOTS];
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct platform_pwm_backlight_data sgh_i900_backlight_data = {
+ .pwm_id = 3,
+ .max_brightness = 100,
+ .dft_brightness = 100,
+ .pwm_period_ns = 10000,
+};
Fix formatting here.
Post by y***@datenfreihafen.org
+
+static struct platform_device sgh_i900_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm1.dev,
+ .platform_data = &sgh_i900_backlight_data,
+ },
+};
+
+static struct pxafb_mode_info sgh_i900_mode = {
+ .pixclock = 96153,
+ .xres = 240,
+ .yres = 400,
+ .bpp = 16,
+ .hsync_len = 8,
+ .left_margin = 8,
+ .right_margin = 8,
+ .vsync_len = 4,
+ .upper_margin = 38,
+ .lower_margin = 38,
+ .sync = 0,
+};
Ditto.
Post by y***@datenfreihafen.org
+
+static struct pxafb_mach_info sgh_i900_lcd_info = {
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void __init sgh_i900_init_lcd(void)
+{
+ platform_device_register(&sgh_i900_backlight_device);
+
+ sgh_i900_lcd_info.modes = &sgh_i900_mode;
+
+ set_pxa_fb_info(&sgh_i900_lcd_info);
+}
+#else
+static inline void sgh_i900_init_lcd(void) {}
+#endif
+
+#if defined(CONFIG_MMC)
+static int sgh_i900_mci_ro(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ return gpio_get_value(sgh_i900_mmc_slot[pdev->id].gpio_wp);
+}
+
+static int sgh_i900_mci_init(struct device *dev,
+ irq_handler_t sgh_i900_detect_int,
+ void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ int err, cd_irq, gpio_cd, gpio_wp;
+
+ cd_irq = gpio_to_irq(sgh_i900_mmc_slot[pdev->id].gpio_cd);
+ gpio_cd = sgh_i900_mmc_slot[pdev->id].gpio_cd;
+ gpio_wp = sgh_i900_mmc_slot[pdev->id].gpio_wp;
+
+ /*
+ * setup GPIO for SGH-i900 MMC controller
+ */
+ err = gpio_request(gpio_cd, "mmc card detect");
+ if (err)
+ goto err_request_cd;
+ gpio_direction_input(gpio_cd);
+
+ err = gpio_request(gpio_wp, "mmc write protect");
+ if (err)
+ goto err_request_wp;
+ gpio_direction_input(gpio_wp);
+
+ err = request_irq(cd_irq, sgh_i900_detect_int,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "%s: MMC/SD/SDIO: "
+ "can't request card detect IRQ\n", __func__);
+ goto err_request_irq;
+ }
+
+ return 0;
+
+ gpio_free(gpio_wp);
+ gpio_free(gpio_cd);
+ return err;
+}
+
+static void sgh_i900_mci_exit(struct device *dev, void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ int cd_irq, gpio_cd, gpio_wp;
+
+ cd_irq = gpio_to_irq(sgh_i900_mmc_slot[pdev->id].gpio_cd);
+ gpio_cd = sgh_i900_mmc_slot[pdev->id].gpio_cd;
+ gpio_wp = sgh_i900_mmc_slot[pdev->id].gpio_wp;
+
+ free_irq(cd_irq, data);
+ gpio_free(gpio_cd);
+ gpio_free(gpio_wp);
+}
+
+static struct pxamci_platform_data sgh_i900_mci_platform_data = {
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = sgh_i900_mci_init,
+ .exit = sgh_i900_mci_exit,
+ .get_ro = sgh_i900_mci_ro,
+};
+
+static struct pxamci_platform_data sgh_i900_mci2_platform_data = {
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+};
+
+static void __init sgh_i900_init_mmc(void)
+{
+ pxa_set_mci_info(&sgh_i900_mci_platform_data);
+ pxa3xx_set_mci2_info(&sgh_i900_mci2_platform_data);
+ pxa3xx_set_mci3_info(&sgh_i900_mci_platform_data);
+}
+#else
+static inline void sgh_i900_init_mmc(void) {}
+#endif
+
+static void __init sgh_i900_init(void)
+{
+ sgh_i900_init_lcd();
+ sgh_i900_init_mmc();
+}
+
+MACHINE_START(SGH_I900, "Samsung SGH-i900 (Omnia) phone")
+ .phys_io = 0x40000000,
+ .boot_params = 0xa0000100,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa3xx_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = sgh_i900_init,
+MACHINE_END
Ditto.
Ciao ciao,
Antonio
--
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing in e-mail?
Web site: http://www.studenti.unina.it/~ospite
Public key: http://www.studenti.unina.it/~ospite/aopubkey.asc
Stefan Schmidt
2009-06-13 23:08:36 UTC
Permalink
Add file entry for easier mainatiner detection and make SCM more visible.

Signed-off-by: Stefan Schmidt <***@datenfreihafen.org>
---
MAINTAINERS | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index ed4f046..57d1f3f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -646,6 +646,8 @@ M: ***@openezx.org
L: openezx-***@lists.openezx.org (subscribers-only)
W: http://www.openezx.org/
S: Maintained
+T: topgit git://git.openezx.org/openezx.git
+F: arch/arm/mach-pxa/ezx.c

ARM/FARADAY FA526 PORT
P: Paulius Zaleckas
--
1.6.3.1


-------------------------------------------------------------------
List admin: http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm-kernel
FAQ: http://www.arm.linux.org.uk/mailinglists/faq.php
Etiquette: http://www.arm.linux.org.uk/mailinglists/etiquette.php
y***@vger.kernel.org
2011-02-21 08:13:33 UTC
Permalink
From: Pratyush Anand <***@st.com>

This is a configurable gadget. can be configured by configfs interface. Any
IP available at PCIE bus can be programmed to be used by host
controller.It supoorts both INTX and MSI.
By default, gadget is configured for INTX and SYSRAM1 is mapped to BAR0
with size 0x1000

Changes since V4:
- All documentation related comments incorporated

Changes since V3:
- support for multiple instances of such device
- changes to minimzie portability issue on 64 bit machine
- unnecessary typecast removed
- sysfs_streq used in place of complex code

Changes since V2:
- driver has been moved from sysfs to configfs
- Documentation/ABI directory has also been updated
- typo error in documenation has been corrected
- clk value is checked after encapsulating by IS_ERR

Changes since V1:
- __iomem added for register addresses
- kerneldoc comment removed whereever not required.
- help node moved from sysfs to documentation/misc-devices
- strict_strtoul used instead of sscanf

Signed-off-by: Pratyush Anand <***@st.com>
---
.../ABI/testing/configfs-spear-pcie-gadget | 30 +
Documentation/misc-devices/spear-pcie-gadget.txt | 129 +++
drivers/misc/Kconfig | 10 +
drivers/misc/Makefile | 1 +
drivers/misc/spear13xx_pcie_gadget.c | 908 ++++++++++++++++++++
5 files changed, 1078 insertions(+), 0 deletions(-)
create mode 100644 Documentation/ABI/testing/configfs-spear-pcie-gadget
create mode 100644 Documentation/misc-devices/spear-pcie-gadget.txt
create mode 100644 drivers/misc/spear13xx_pcie_gadget.c

diff --git a/Documentation/ABI/testing/configfs-spear-pcie-gadget b/Documentation/ABI/testing/configfs-spear-pcie-gadget
new file mode 100644
index 0000000..29593d0
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-spear-pcie-gadget
@@ -0,0 +1,30 @@
+What: /config/pcie-gadget
+Date: Feb 2011
+KernelVersion: 2.6.37
+Contact: Pratyush Anand <***@st.com>
+Description:
+
+ Interface is used to configure selected dual mode PCIe controller
+ as device and then program its various registers to configure it
+ as a particular device type.
+ This interfaces can be used to show spear's PCIe device capability.
+
+ Nodes are only visible when configfs is mounted. To mount configfs
+ in /config directory use:
+ # mount -t configfs none /config/
+
+ /config/pcie-gadget/
+ link ... used to enable ltssm and read its status.
+ int_type ...used to configure and read type of supported
+ interrupt
+ no_of_msi ... used to configure number of MSI vector needed and
+ to read no of MSI granted.
+ inta ... write 1 to assert INTA and 0 to de-assert.
+ send_msi ... write MSI vector to be sent.
+ vendor_id ... used to write and read vendor id (hex)
+ device_id ... used to write and read device id (hex)
+ bar0_size ... used to write and read bar0_size
+ bar0_address ... used to write and read bar0 mapped area in hex.
+ bar0_rw_offset ... used to write and read offset of bar0 where
+ bar0_data will be written or read.
+ bar0_data ... used to write and read data at bar0_rw_offset.
diff --git a/Documentation/misc-devices/spear-pcie-gadget.txt b/Documentation/misc-devices/spear-pcie-gadget.txt
new file mode 100644
index 0000000..7b86b80
--- /dev/null
+++ b/Documentation/misc-devices/spear-pcie-gadget.txt
@@ -0,0 +1,129 @@
+Spear PCIe Gadget Driver:
+
+Author
+=============
+Pratyush Anand (***@st.com)
+
+Location
+============
+driver/misc/spear13xx_pcie_gadget.c
+
+Supported Chip:
+===================
+SPEAr1300
+SPEAr1310
+
+Menuconfig option:
+==========================
+Device Drivers
+ Misc devices
+ PCIe gadget support for SPEAr13XX platform
+purpose
+===========
+This driver has several nodes which can be read/written by configfs interface.
+Its main purpose is to configure selected dual mode PCIe controller as device
+and then program its various registers to configure it as a particular device
+type. This driver can be used to show spear's PCIe device capability.
+
+Description of different nodes:
+=================================
+
+read behavior of nodes:
+------------------------------
+link :gives ltssm status.
+int_type :type of supported interrupt
+no_of_msi :zero if MSI is not enabled by host. A positive value is the
+ number of MSI vector granted.
+vendor_id :returns programmed vendor id (hex)
+device_id :returns programmed device id(hex)
+bar0_size: :returns size of bar0 in hex.
+bar0_address :returns address of bar0 mapped area in hex.
+bar0_rw_offset :returns offset of bar0 for which bar0_data will return value.
+bar0_data :returns data at bar0_rw_offset.
+
+write behavior of nodes:
+------------------------------
+link :write UP to enable ltsmm DOWN to disable
+int_type :write interrupt type to be configured and (int_type could be
+ INTA, MSI or NO_INT). Select MSI only when you have programmed
+ no_of_msi node.
+no_of_msi :number of MSI vector needed.
+inta :write 1 to assert INTA and 0 to de-assert.
+send_msi :write MSI vector to be sent.
+vendor_id :write vendor id(hex) to be programmed.
+device_id :write device id(hex) to be programmed.
+bar0_size :write size of bar0 in hex. default bar0 size is 1000 (hex)
+ bytes.
+bar0_address :write address of bar0 mapped area in hex. (default mapping of
+ bar0 is SYSRAM1(E0800000). Always program bar size before bar
+ address. Kernel might modify bar size and address for alignment, so
+ read back bar size and address after writing to cross check.
+bar0_rw_offset :write offset of bar0 for which bar0_data will write value.
+bar0_data :write data to be written at bar0_rw_offset.
+
+Node programming example
+===========================
+Program all PCIe registers in such a way that when this device is connected
+to the PCIe host, then host sees this device as 1MB RAM.
+#mount -t configfs none /Config
+# cd /config/pcie_gadget/
+Now you have all the nodes in this directory.
+program vendor id as 0x104a
+# echo 104A >> vendor_id
+
+program device id as 0xCD80
+# echo CD80 >> device_id
+
+program BAR0 size as 1MB
+# echo 100000 >> bar0_size
+
+check for programmed bar0 size
+# cat bar0_size
+
+Program BAR0 Address as DDR (0x2100000). This is the physical address of
+memory, which is to be made visible to PCIe host. Similarly any other peripheral
+can also be made visible to PCIe host. E.g., if you program base address of UART
+as BAR0 address then when this device will be connected to a host, it will be
+visible as UART.
+# echo 2100000 >> bar0_address
+
+program interrupt type : INTA
+# echo INTA >> int_type
+
+go for link up now.
+# echo UP >> link
+
+It will have to be insured that, once link up is done on gadget, then only host
+is initialized and start to search PCIe devices on its port.
+
+/*wait till link is up*/
+# cat link
+wait till it returns UP.
+
+To assert INTA
+# echo 1 >> inta
+
+To de-assert INTA
+# echo 0 >> inta
+
+if MSI is to be used as interrupt, program no of msi vector needed (say4)
+# echo 4 >> no_of_msi
+
+select MSI as interrupt type
+# echo MSI >> int_type
+
+go for link up now
+# echo UP >> link
+
+wait till link is up
+# cat link
+An application can repetitively read this node till link is found UP. It can
+sleep between two read.
+
+wait till msi is enabled
+# cat no_of_msi
+Should return 4 (number of requested MSI vector)
+
+to send msi vector 2
+# echo 2 >> send_msi
+#cd -
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 4d073f1..dea052d 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -394,6 +394,16 @@ config DS1682
This driver can also be built as a module. If so, the module
will be called ds1682.

+config SPEAR13XX_PCIE_GADGET
+ bool "PCIe gadget support for SPEAr13XX platform"
+ depends on ARCH_SPEAR13XX
+ default n
+ help
+ This option enables gadget support for PCIe controller. If
+ board file defines any controller as PCIe endpoint then a sysfs
+ entry will be created for that controller. User can use these
+ sysfs node to configure PCIe EP as per his requirements.
+
config TI_DAC7512
tristate "Texas Instruments DAC7512"
depends on SPI && SYSFS
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 98009cc..c489536 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_IWMC3200TOP) += iwmc3200top/
obj-$(CONFIG_HMC6352) += hmc6352.o
obj-y += eeprom/
obj-y += cb710/
+obj-$(CONFIG_SPEAR13XX_PCIE_GADGET) += spear13xx_pcie_gadget.o
obj-$(CONFIG_VMWARE_BALLOON) += vmw_balloon.o
obj-$(CONFIG_ARM_CHARLCD) += arm-charlcd.o
obj-$(CONFIG_PCH_PHUB) += pch_phub.o
diff --git a/drivers/misc/spear13xx_pcie_gadget.c b/drivers/misc/spear13xx_pcie_gadget.c
new file mode 100644
index 0000000..ec3b8c9
--- /dev/null
+++ b/drivers/misc/spear13xx_pcie_gadget.c
@@ -0,0 +1,908 @@
+/*
+ * drivers/misc/spear13xx_pcie_gadget.c
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Pratyush Anand<***@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pci_regs.h>
+#include <linux/configfs.h>
+#include <mach/pcie.h>
+#include <mach/misc_regs.h>
+
+#define IN0_MEM_SIZE (200 * 1024 * 1024 - 1)
+/* In current implementation address translation is done using IN0 only.
+ * So IN1 start address and IN0 end address has been kept same
+*/
+#define IN1_MEM_SIZE (0 * 1024 * 1024 - 1)
+#define IN_IO_SIZE (20 * 1024 * 1024 - 1)
+#define IN_CFG0_SIZE (12 * 1024 * 1024 - 1)
+#define IN_CFG1_SIZE (12 * 1024 * 1024 - 1)
+#define IN_MSG_SIZE (12 * 1024 * 1024 - 1)
+/* Keep default BAR size as 4K*/
+/* AORAM would be mapped by default*/
+#define INBOUND_ADDR_MASK (SPEAR13XX_SYSRAM1_SIZE - 1)
+
+#define INT_TYPE_NO_INT 0
+#define INT_TYPE_INTX 1
+#define INT_TYPE_MSI 2
+struct spear_pcie_gadget_config {
+ void __iomem *base;
+ void __iomem *va_app_base;
+ void __iomem *va_dbi_base;
+ char int_type[10];
+ ulong requested_msi;
+ ulong configured_msi;
+ ulong bar0_size;
+ ulong bar0_rw_offset;
+ void __iomem *va_bar0_address;
+};
+
+struct pcie_gadget_target {
+ struct configfs_subsystem subsys;
+ struct spear_pcie_gadget_config config;
+};
+
+struct pcie_gadget_target_attr {
+ struct configfs_attribute attr;
+ ssize_t (*show)(struct spear_pcie_gadget_config *config,
+ char *buf);
+ ssize_t (*store)(struct spear_pcie_gadget_config *config,
+ const char *buf,
+ size_t count);
+};
+
+static void enable_dbi_access(struct pcie_app_reg __iomem *app_reg)
+{
+ /* Enable DBI access */
+ writel(readl(&app_reg->slv_armisc) | (1 << AXI_OP_DBI_ACCESS_ID),
+ &app_reg->slv_armisc);
+ writel(readl(&app_reg->slv_awmisc) | (1 << AXI_OP_DBI_ACCESS_ID),
+ &app_reg->slv_awmisc);
+
+}
+
+static void disable_dbi_access(struct pcie_app_reg __iomem *app_reg)
+{
+ /* disable DBI access */
+ writel(readl(&app_reg->slv_armisc) & ~(1 << AXI_OP_DBI_ACCESS_ID),
+ &app_reg->slv_armisc);
+ writel(readl(&app_reg->slv_awmisc) & ~(1 << AXI_OP_DBI_ACCESS_ID),
+ &app_reg->slv_awmisc);
+
+}
+
+static void spear_dbi_read_reg(struct spear_pcie_gadget_config *config,
+ int where, int size, u32 *val)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+ ulong va_address;
+
+ /* Enable DBI access */
+ enable_dbi_access(app_reg);
+
+ va_address = (ulong)config->va_dbi_base + (where & ~0x3);
+
+ *val = readl(va_address);
+
+ if (size == 1)
+ *val = (*val >> (8 * (where & 3))) & 0xff;
+ else if (size == 2)
+ *val = (*val >> (8 * (where & 3))) & 0xffff;
+
+ /* Disable DBI access */
+ disable_dbi_access(app_reg);
+}
+
+static void spear_dbi_write_reg(struct spear_pcie_gadget_config *config,
+ int where, int size, u32 val)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+ ulong va_address;
+
+ /* Enable DBI access */
+ enable_dbi_access(app_reg);
+
+ va_address = (ulong)config->va_dbi_base + (where & ~0x3);
+
+ if (size == 4)
+ writel(val, va_address);
+ else if (size == 2)
+ writew(val, va_address + (where & 2));
+ else if (size == 1)
+ writeb(val, va_address + (where & 3));
+
+ /* Disable DBI access */
+ disable_dbi_access(app_reg);
+}
+
+#define PCI_FIND_CAP_TTL 48
+
+static int pci_find_own_next_cap_ttl(struct spear_pcie_gadget_config *config,
+ u32 pos, int cap, int *ttl)
+{
+ u32 id;
+
+ while ((*ttl)--) {
+ spear_dbi_read_reg(config, pos, 1, &pos);
+ if (pos < 0x40)
+ break;
+ pos &= ~3;
+ spear_dbi_read_reg(config, pos + PCI_CAP_LIST_ID, 1, &id);
+ if (id == 0xff)
+ break;
+ if (id == cap)
+ return pos;
+ pos += PCI_CAP_LIST_NEXT;
+ }
+ return 0;
+}
+
+static int pci_find_own_next_cap(struct spear_pcie_gadget_config *config,
+ u32 pos, int cap)
+{
+ int ttl = PCI_FIND_CAP_TTL;
+
+ return pci_find_own_next_cap_ttl(config, pos, cap, &ttl);
+}
+
+static int pci_find_own_cap_start(struct spear_pcie_gadget_config *config,
+ u8 hdr_type)
+{
+ u32 status;
+
+ spear_dbi_read_reg(config, PCI_STATUS, 2, &status);
+ if (!(status & PCI_STATUS_CAP_LIST))
+ return 0;
+
+ switch (hdr_type) {
+ case PCI_HEADER_TYPE_NORMAL:
+ case PCI_HEADER_TYPE_BRIDGE:
+ return PCI_CAPABILITY_LIST;
+ case PCI_HEADER_TYPE_CARDBUS:
+ return PCI_CB_CAPABILITY_LIST;
+ default:
+ return 0;
+ }
+
+ return 0;
+}
+
+/*
+ * Tell if a device supports a given PCI capability.
+ * Returns the address of the requested capability structure within the
+ * device's PCI configuration space or 0 in case the device does not
+ * support it. Possible values for @cap:
+ *
+ * %PCI_CAP_ID_PM Power Management
+ * %PCI_CAP_ID_AGP Accelerated Graphics Port
+ * %PCI_CAP_ID_VPD Vital Product Data
+ * %PCI_CAP_ID_SLOTID Slot Identification
+ * %PCI_CAP_ID_MSI Message Signalled Interrupts
+ * %PCI_CAP_ID_CHSWP CompactPCI HotSwap
+ * %PCI_CAP_ID_PCIX PCI-X
+ * %PCI_CAP_ID_EXP PCI Express
+ */
+static int pci_find_own_capability(struct spear_pcie_gadget_config *config,
+ int cap)
+{
+ u32 pos;
+ u32 hdr_type;
+
+ spear_dbi_read_reg(config, PCI_HEADER_TYPE, 1, &hdr_type);
+
+ pos = pci_find_own_cap_start(config, hdr_type);
+ if (pos)
+ pos = pci_find_own_next_cap(config, pos, cap);
+
+ return pos;
+}
+
+static irqreturn_t spear_pcie_gadget_irq(int irq, void *dev_id)
+{
+ return 0;
+}
+
+/*
+ * configfs interfaces show/store functions
+ */
+static ssize_t pcie_gadget_show_link(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+
+ if (readl(&app_reg->app_status_1) & ((u32)1 << XMLH_LINK_UP_ID))
+ return sprintf(buf, "UP");
+ else
+ return sprintf(buf, "DOWN");
+}
+
+static ssize_t pcie_gadget_store_link(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+
+ if (sysfs_streq(buf, "UP"))
+ writel(readl(&app_reg->app_ctrl_0) | (1 << APP_LTSSM_ENABLE_ID),
+ &app_reg->app_ctrl_0);
+ else if (sysfs_streq(buf, "DOWN"))
+ writel(readl(&app_reg->app_ctrl_0)
+ & ~(1 << APP_LTSSM_ENABLE_ID),
+ &app_reg->app_ctrl_0);
+ else
+ return -EINVAL;
+ return count;
+}
+
+static ssize_t pcie_gadget_show_int_type(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ return sprintf(buf, "%s", config->int_type);
+}
+
+static ssize_t pcie_gadget_store_int_type(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ u32 cap, vec, flags;
+ ulong vector;
+
+ if (sysfs_streq(buf, "INTA"))
+ spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 1);
+
+ else if (sysfs_streq(buf, "MSI")) {
+ vector = config->requested_msi;
+ vec = 0;
+ while (vector > 1) {
+ vector /= 2;
+ vec++;
+ }
+ spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 0);
+ cap = pci_find_own_capability(config, PCI_CAP_ID_MSI);
+ spear_dbi_read_reg(config, cap + PCI_MSI_FLAGS, 1, &flags);
+ flags &= ~PCI_MSI_FLAGS_QMASK;
+ flags |= vec << 1;
+ spear_dbi_write_reg(config, cap + PCI_MSI_FLAGS, 1, flags);
+ } else
+ return -EINVAL;
+
+ strcpy(config->int_type, buf);
+
+ return count;
+}
+
+static ssize_t pcie_gadget_show_no_of_msi(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+ u32 cap, vec, flags;
+ ulong vector;
+
+ if ((readl(&app_reg->msg_status) & (1 << CFG_MSI_EN_ID))
+ != (1 << CFG_MSI_EN_ID))
+ vector = 0;
+ else {
+ cap = pci_find_own_capability(config, PCI_CAP_ID_MSI);
+ spear_dbi_read_reg(config, cap + PCI_MSI_FLAGS, 1, &flags);
+ flags &= ~PCI_MSI_FLAGS_QSIZE;
+ vec = flags >> 4;
+ vector = 1;
+ while (vec--)
+ vector *= 2;
+ }
+ config->configured_msi = vector;
+
+ return sprintf(buf, "%lu", vector);
+}
+
+static ssize_t pcie_gadget_store_no_of_msi(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ if (strict_strtoul(buf, 0, &config->requested_msi))
+ return -EINVAL;
+ if (config->requested_msi > 32)
+ config->requested_msi = 32;
+
+ return count;
+}
+
+static ssize_t pcie_gadget_store_inta(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+ ulong en;
+
+ if (strict_strtoul(buf, 0, &en))
+ return -EINVAL;
+
+ if (en)
+ writel(readl(&app_reg->app_ctrl_0) | (1 << SYS_INT_ID),
+ &app_reg->app_ctrl_0);
+ else
+ writel(readl(&app_reg->app_ctrl_0) & ~(1 << SYS_INT_ID),
+ &app_reg->app_ctrl_0);
+
+ return count;
+}
+
+static ssize_t pcie_gadget_store_send_msi(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+ ulong vector;
+ u32 ven_msi;
+
+ if (strict_strtoul(buf, 0, &vector))
+ return -EINVAL;
+
+ if (!config->configured_msi)
+ return -EINVAL;
+
+ if (vector >= config->configured_msi)
+ return -EINVAL;
+
+ ven_msi = readl(&app_reg->ven_msi_1);
+ ven_msi &= ~VEN_MSI_FUN_NUM_MASK;
+ ven_msi |= 0 << VEN_MSI_FUN_NUM_ID;
+ ven_msi &= ~VEN_MSI_TC_MASK;
+ ven_msi |= 0 << VEN_MSI_TC_ID;
+ ven_msi &= ~VEN_MSI_VECTOR_MASK;
+ ven_msi |= vector << VEN_MSI_VECTOR_ID;
+
+ /* generating interrupt for msi vector */
+ ven_msi |= VEN_MSI_REQ_EN;
+ writel(ven_msi, &app_reg->ven_msi_1);
+ udelay(1);
+ ven_msi &= ~VEN_MSI_REQ_EN;
+ writel(ven_msi, &app_reg->ven_msi_1);
+
+ return count;
+}
+
+static ssize_t pcie_gadget_show_vendor_id(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ u32 id;
+
+ spear_dbi_read_reg(config, PCI_VENDOR_ID, 2, &id);
+
+ return sprintf(buf, "%x", id);
+}
+
+static ssize_t pcie_gadget_store_vendor_id(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ ulong id;
+
+ if (strict_strtoul(buf, 0, &id))
+ return -EINVAL;
+
+ spear_dbi_write_reg(config, PCI_VENDOR_ID, 2, id);
+
+ return count;
+}
+
+static ssize_t pcie_gadget_show_device_id(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ u32 id;
+
+ spear_dbi_read_reg(config, PCI_DEVICE_ID, 2, &id);
+
+ return sprintf(buf, "%x", id);
+}
+
+static ssize_t pcie_gadget_store_device_id(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ ulong id;
+
+ if (strict_strtoul(buf, 0, &id))
+ return -EINVAL;
+
+ spear_dbi_write_reg(config, PCI_DEVICE_ID, 2, id);
+
+ return count;
+}
+
+static ssize_t pcie_gadget_show_bar0_size(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ return sprintf(buf, "%lx", config->bar0_size);
+}
+
+static ssize_t pcie_gadget_store_bar0_size(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ ulong size;
+ u32 pos, pos1;
+ u32 no_of_bit = 0;
+
+ if (strict_strtoul(buf, 0, &size))
+ return -EINVAL;
+ /* min bar size is 256 */
+ if (size <= 0x100)
+ size = 0x100;
+ /* max bar size is 1MB*/
+ else if (size >= 0x100000)
+ size = 0x100000;
+ else {
+ pos = 0;
+ pos1 = 0;
+ while (pos < 21) {
+ pos = find_next_bit((ulong *)&size, 21, pos);
+ if (pos != 21)
+ pos1 = pos + 1;
+ pos++;
+ no_of_bit++;
+ }
+ if (no_of_bit == 2)
+ pos1--;
+
+ size = 1 << pos1;
+ }
+ config->bar0_size = size;
+ spear_dbi_write_reg(config, PCIE_BAR0_MASK_REG, 4, size - 1);
+
+ return count;
+}
+
+static ssize_t pcie_gadget_show_bar0_address(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+
+ u32 address = readl(&app_reg->pim0_mem_addr_start);
+
+ return sprintf(buf, "%x", address);
+}
+
+static ssize_t pcie_gadget_store_bar0_address(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+ ulong address;
+
+ if (strict_strtoul(buf, 0, &address))
+ return -EINVAL;
+
+ address &= ~(config->bar0_size - 1);
+ if (config->va_bar0_address)
+ iounmap(config->va_bar0_address);
+ config->va_bar0_address = ioremap(address, config->bar0_size);
+ if (!config->va_bar0_address)
+ return -ENOMEM;
+
+ writel(address, &app_reg->pim0_mem_addr_start);
+
+ return count;
+}
+
+static ssize_t pcie_gadget_show_bar0_rw_offset(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ return sprintf(buf, "%lx", config->bar0_rw_offset);
+}
+
+static ssize_t pcie_gadget_store_bar0_rw_offset(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ ulong offset;
+
+ if (strict_strtoul(buf, 0, &offset))
+ return -EINVAL;
+
+ if (offset % 4)
+ return -EINVAL;
+
+ config->bar0_rw_offset = offset;
+
+ return count;
+}
+
+static ssize_t pcie_gadget_show_bar0_data(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ ulong data;
+
+ if (!config->va_bar0_address)
+ return -ENOMEM;
+
+ data = readl((ulong)config->va_bar0_address + config->bar0_rw_offset);
+
+ return sprintf(buf, "%lx", data);
+}
+
+static ssize_t pcie_gadget_store_bar0_data(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ ulong data;
+
+ if (strict_strtoul(buf, 0, &data))
+ return -EINVAL;
+
+ if (!config->va_bar0_address)
+ return -ENOMEM;
+
+ writel(data, (ulong)config->va_bar0_address + config->bar0_rw_offset);
+
+ return count;
+}
+
+/*
+ * Attribute definitions.
+ */
+
+#define PCIE_GADGET_TARGET_ATTR_RO(_name) \
+static struct pcie_gadget_target_attr pcie_gadget_target_##_name = \
+ __CONFIGFS_ATTR(_name, S_IRUGO, pcie_gadget_show_##_name, NULL)
+
+#define PCIE_GADGET_TARGET_ATTR_WO(_name) \
+static struct pcie_gadget_target_attr pcie_gadget_target_##_name = \
+ __CONFIGFS_ATTR(_name, S_IWUSR, NULL, pcie_gadget_store_##_name)
+
+#define PCIE_GADGET_TARGET_ATTR_RW(_name) \
+static struct pcie_gadget_target_attr pcie_gadget_target_##_name = \
+ __CONFIGFS_ATTR(_name, S_IRUGO | S_IWUSR, pcie_gadget_show_##_name, \
+ pcie_gadget_store_##_name)
+PCIE_GADGET_TARGET_ATTR_RW(link);
+PCIE_GADGET_TARGET_ATTR_RW(int_type);
+PCIE_GADGET_TARGET_ATTR_RW(no_of_msi);
+PCIE_GADGET_TARGET_ATTR_WO(inta);
+PCIE_GADGET_TARGET_ATTR_WO(send_msi);
+PCIE_GADGET_TARGET_ATTR_RW(vendor_id);
+PCIE_GADGET_TARGET_ATTR_RW(device_id);
+PCIE_GADGET_TARGET_ATTR_RW(bar0_size);
+PCIE_GADGET_TARGET_ATTR_RW(bar0_address);
+PCIE_GADGET_TARGET_ATTR_RW(bar0_rw_offset);
+PCIE_GADGET_TARGET_ATTR_RW(bar0_data);
+
+static struct configfs_attribute *pcie_gadget_target_attrs[] = {
+ &pcie_gadget_target_link.attr,
+ &pcie_gadget_target_int_type.attr,
+ &pcie_gadget_target_no_of_msi.attr,
+ &pcie_gadget_target_inta.attr,
+ &pcie_gadget_target_send_msi.attr,
+ &pcie_gadget_target_vendor_id.attr,
+ &pcie_gadget_target_device_id.attr,
+ &pcie_gadget_target_bar0_size.attr,
+ &pcie_gadget_target_bar0_address.attr,
+ &pcie_gadget_target_bar0_rw_offset.attr,
+ &pcie_gadget_target_bar0_data.attr,
+ NULL,
+};
+
+static struct pcie_gadget_target *to_target(struct config_item *item)
+{
+ return item ?
+ container_of(to_configfs_subsystem(to_config_group(item)),
+ struct pcie_gadget_target, subsys) : NULL;
+}
+
+/*
+ * Item operations and type for pcie_gadget_target.
+ */
+
+static ssize_t pcie_gadget_target_attr_show(struct config_item *item,
+ struct configfs_attribute *attr,
+ char *buf)
+{
+ ssize_t ret = -EINVAL;
+ struct pcie_gadget_target *target = to_target(item);
+ struct pcie_gadget_target_attr *t_attr =
+ container_of(attr, struct pcie_gadget_target_attr, attr);
+
+ if (t_attr->show)
+ ret = t_attr->show(&target->config, buf);
+ return ret;
+}
+
+static ssize_t pcie_gadget_target_attr_store(struct config_item *item,
+ struct configfs_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ ssize_t ret = -EINVAL;
+ struct pcie_gadget_target *target = to_target(item);
+ struct pcie_gadget_target_attr *t_attr =
+ container_of(attr, struct pcie_gadget_target_attr, attr);
+
+ if (t_attr->store)
+ ret = t_attr->store(&target->config, buf, count);
+ return ret;
+}
+
+static struct configfs_item_operations pcie_gadget_target_item_ops = {
+ .show_attribute = pcie_gadget_target_attr_show,
+ .store_attribute = pcie_gadget_target_attr_store,
+};
+
+static struct config_item_type pcie_gadget_target_type = {
+ .ct_attrs = pcie_gadget_target_attrs,
+ .ct_item_ops = &pcie_gadget_target_item_ops,
+ .ct_owner = THIS_MODULE,
+};
+
+static void spear13xx_pcie_device_init(struct spear_pcie_gadget_config *config)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+
+ /*setup registers for outbound translation */
+
+ writel(config->base, &app_reg->in0_mem_addr_start);
+ writel(app_reg->in0_mem_addr_start + IN0_MEM_SIZE,
+ &app_reg->in0_mem_addr_limit);
+ writel(app_reg->in0_mem_addr_limit + 1, &app_reg->in1_mem_addr_start);
+ writel(app_reg->in1_mem_addr_start + IN1_MEM_SIZE,
+ &app_reg->in1_mem_addr_limit);
+ writel(app_reg->in1_mem_addr_limit + 1, &app_reg->in_io_addr_start);
+ writel(app_reg->in_io_addr_start + IN_IO_SIZE,
+ &app_reg->in_io_addr_limit);
+ writel(app_reg->in_io_addr_limit + 1, &app_reg->in_cfg0_addr_start);
+ writel(app_reg->in_cfg0_addr_start + IN_CFG0_SIZE,
+ &app_reg->in_cfg0_addr_limit);
+ writel(app_reg->in_cfg0_addr_limit + 1, &app_reg->in_cfg1_addr_start);
+ writel(app_reg->in_cfg1_addr_start + IN_CFG1_SIZE,
+ &app_reg->in_cfg1_addr_limit);
+ writel(app_reg->in_cfg1_addr_limit + 1, &app_reg->in_msg_addr_start);
+ writel(app_reg->in_msg_addr_start + IN_MSG_SIZE,
+ &app_reg->in_msg_addr_limit);
+
+ writel(app_reg->in0_mem_addr_start, &app_reg->pom0_mem_addr_start);
+ writel(app_reg->in1_mem_addr_start, &app_reg->pom1_mem_addr_start);
+ writel(app_reg->in_io_addr_start, &app_reg->pom_io_addr_start);
+
+ /*setup registers for inbound translation */
+
+ /* Keep AORAM mapped at BAR0 as default */
+ config->bar0_size = INBOUND_ADDR_MASK + 1;
+ spear_dbi_write_reg(config, PCIE_BAR0_MASK_REG, 4, INBOUND_ADDR_MASK);
+ spear_dbi_write_reg(config, PCI_BASE_ADDRESS_0, 4, 0xC);
+ config->va_bar0_address = ioremap(SPEAR13XX_SYSRAM1_BASE,
+ config->bar0_size);
+
+ writel(SPEAR13XX_SYSRAM1_BASE, &app_reg->pim0_mem_addr_start);
+ writel(0, &app_reg->pim1_mem_addr_start);
+ writel(INBOUND_ADDR_MASK + 1, &app_reg->mem0_addr_offset_limit);
+
+ writel(0x0, &app_reg->pim_io_addr_start);
+ writel(0x0, &app_reg->pim_io_addr_start);
+ writel(0x0, &app_reg->pim_rom_addr_start);
+
+ writel(DEVICE_TYPE_EP | (1 << MISCTRL_EN_ID)
+ | ((u32)1 << REG_TRANSLATION_ENABLE),
+ &app_reg->app_ctrl_0);
+ /* disable all rx interrupts */
+ writel(0, &app_reg->int_mask);
+
+ /* Select INTA as default*/
+ spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 1);
+}
+
+static int __devinit spear_pcie_gadget_probe(struct platform_device *pdev)
+{
+ struct resource *res0, *res1;
+ unsigned int status = 0;
+ int irq;
+ struct clk *clk;
+ static struct pcie_gadget_target *target;
+ struct spear_pcie_gadget_config *config;
+ struct config_item *cg_item;
+ struct configfs_subsystem *subsys;
+
+ /* get resource for application registers*/
+
+ res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res0) {
+ dev_err(&pdev->dev, "no resource defined\n");
+ return -EBUSY;
+ }
+ if (!request_mem_region(res0->start, resource_size(res0),
+ pdev->name)) {
+ dev_err(&pdev->dev, "pcie gadget region already claimed\n");
+ return -EBUSY;
+ }
+ /* get resource for dbi registers*/
+
+ res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res1) {
+ dev_err(&pdev->dev, "no resource defined\n");
+ goto err_rel_res0;
+ }
+ if (!request_mem_region(res1->start, resource_size(res1),
+ pdev->name)) {
+ dev_err(&pdev->dev, "pcie gadget region already claimed\n");
+ goto err_rel_res0;
+ }
+
+ target = kzalloc(sizeof(*target), GFP_KERNEL);
+ if (!target) {
+ dev_err(&pdev->dev, "out of memory\n");
+ status = -ENOMEM;
+ goto err_rel_res;
+ }
+
+ cg_item = &target->subsys.su_group.cg_item;
+ sprintf(cg_item->ci_namebuf, "pcie_gadget.%d", pdev->id);
+ cg_item->ci_type = &pcie_gadget_target_type;
+ config = &target->config;
+ config->va_app_base = (void __iomem *)ioremap(res0->start,
+ resource_size(res0));
+ if (!config->va_app_base) {
+ dev_err(&pdev->dev, "ioremap fail\n");
+ status = -ENOMEM;
+ goto err_kzalloc;
+ }
+
+ config->base = (void __iomem *)res1->start;
+
+ config->va_dbi_base = (void __iomem *)ioremap(res1->start,
+ resource_size(res1));
+ if (!config->va_dbi_base) {
+ dev_err(&pdev->dev, "ioremap fail\n");
+ status = -ENOMEM;
+ goto err_iounmap_app;
+ }
+
+ dev_set_drvdata(&pdev->dev, target);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "no update irq?\n");
+ status = irq;
+ goto err_iounmap;
+ }
+
+ status = request_irq(irq, spear_pcie_gadget_irq, 0, pdev->name, NULL);
+ if (status) {
+ dev_err(&pdev->dev, "pcie gadget interrupt IRQ%d already \
+ claimed\n", irq);
+ goto err_iounmap;
+ }
+
+ /* Register configfs hooks */
+ subsys = &target->subsys;
+ config_group_init(&subsys->su_group);
+ mutex_init(&subsys->su_mutex);
+ status = configfs_register_subsystem(subsys);
+ if (status)
+ goto err_irq;
+
+ /*
+ * init basic pcie application registers
+ * do not enable clock if it is PCIE0.Ideally , all controller should
+ * have been independent from others with respect to clock. But PCIE1
+ * and 2 depends on PCIE0.So PCIE0 clk is provided during board init.
+ */
+ if (pdev->id == 1) {
+ /*
+ * Ideally CFG Clock should have been also enabled here. But
+ * it is done currently during board init routne
+ */
+ clk = clk_get_sys("pcie1", NULL);
+ if (IS_ERR(clk)) {
+ pr_err("%s:couldn't get clk for pcie1\n", __func__);
+ goto err_irq;
+ }
+ if (clk_enable(clk)) {
+ pr_err("%s:couldn't enable clk for pcie1\n", __func__);
+ goto err_irq;
+ }
+ } else if (pdev->id == 2) {
+ /*
+ * Ideally CFG Clock should have been also enabled here. But
+ * it is done currently during board init routne
+ */
+ clk = clk_get_sys("pcie2", NULL);
+ if (IS_ERR(clk)) {
+ pr_err("%s:couldn't get clk for pcie2\n", __func__);
+ goto err_irq;
+ }
+ if (clk_enable(clk)) {
+ pr_err("%s:couldn't enable clk for pcie2\n", __func__);
+ goto err_irq;
+ }
+ }
+ spear13xx_pcie_device_init(config);
+
+ return 0;
+err_irq:
+ free_irq(irq, NULL);
+err_iounmap:
+ iounmap(config->va_dbi_base);
+err_iounmap_app:
+ iounmap(config->va_app_base);
+err_kzalloc:
+ kfree(config);
+err_rel_res:
+ release_mem_region(res1->start, resource_size(res1));
+err_rel_res0:
+ release_mem_region(res0->start, resource_size(res0));
+ return status;
+}
+
+static int __devexit spear_pcie_gadget_remove(struct platform_device *pdev)
+{
+ struct resource *res0, *res1;
+ static struct pcie_gadget_target *target;
+ struct spear_pcie_gadget_config *config;
+ int irq;
+
+ res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ irq = platform_get_irq(pdev, 0);
+ target = dev_get_drvdata(&pdev->dev);
+ config = &target->config;
+
+ free_irq(irq, NULL);
+ iounmap(config->va_dbi_base);
+ iounmap(config->va_app_base);
+ release_mem_region(res1->start, resource_size(res1));
+ release_mem_region(res0->start, resource_size(res0));
+ configfs_unregister_subsystem(&target->subsys);
+ kfree(target);
+
+ return 0;
+}
+
+static void spear_pcie_gadget_shutdown(struct platform_device *pdev)
+{
+}
+
+static struct platform_driver spear_pcie_gadget_driver = {
+ .probe = spear_pcie_gadget_probe,
+ .remove = spear_pcie_gadget_remove,
+ .shutdown = spear_pcie_gadget_shutdown,
+ .driver = {
+ .name = "pcie-gadget-spear",
+ .bus = &platform_bus_type
+ },
+};
+
+static int __init spear_pcie_gadget_init(void)
+{
+ return platform_driver_register(&spear_pcie_gadget_driver);
+}
+module_init(spear_pcie_gadget_init);
+
+static void __exit spear_pcie_gadget_exit(void)
+{
+ platform_driver_unregister(&spear_pcie_gadget_driver);
+}
+module_exit(spear_pcie_gadget_exit);
+
+MODULE_ALIAS("pcie-gadget-spear");
+MODULE_AUTHOR("Pratyush Anand");
+MODULE_LICENSE("GPL");
--
1.6.0.2
y***@vger.kernel.org
2011-02-21 08:13:33 UTC
Permalink
From: Pratyush Anand <***@st.com>

This is a configurable gadget. can be configured by configfs interface. Any
IP available at PCIE bus can be programmed to be used by host
controller.It supoorts both INTX and MSI.
By default, gadget is configured for INTX and SYSRAM1 is mapped to BAR0
with size 0x1000

Changes since V4:
- All documentation related comments incorporated

Changes since V3:
- support for multiple instances of such device
- changes to minimzie portability issue on 64 bit machine
- unnecessary typecast removed
- sysfs_streq used in place of complex code

Changes since V2:
- driver has been moved from sysfs to configfs
- Documentation/ABI directory has also been updated
- typo error in documenation has been corrected
- clk value is checked after encapsulating by IS_ERR

Changes since V1:
- __iomem added for register addresses
- kerneldoc comment removed whereever not required.
- help node moved from sysfs to documentation/misc-devices
- strict_strtoul used instead of sscanf

Signed-off-by: Pratyush Anand <***@st.com>
---
.../ABI/testing/configfs-spear-pcie-gadget | 30 +
Documentation/misc-devices/spear-pcie-gadget.txt | 129 +++
drivers/misc/Kconfig | 10 +
drivers/misc/Makefile | 1 +
drivers/misc/spear13xx_pcie_gadget.c | 908 ++++++++++++++++++++
5 files changed, 1078 insertions(+), 0 deletions(-)
create mode 100644 Documentation/ABI/testing/configfs-spear-pcie-gadget
create mode 100644 Documentation/misc-devices/spear-pcie-gadget.txt
create mode 100644 drivers/misc/spear13xx_pcie_gadget.c

diff --git a/Documentation/ABI/testing/configfs-spear-pcie-gadget b/Documentation/ABI/testing/configfs-spear-pcie-gadget
new file mode 100644
index 0000000..29593d0
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-spear-pcie-gadget
@@ -0,0 +1,30 @@
+What: /config/pcie-gadget
+Date: Feb 2011
+KernelVersion: 2.6.37
+Contact: Pratyush Anand <***@st.com>
+Description:
+
+ Interface is used to configure selected dual mode PCIe controller
+ as device and then program its various registers to configure it
+ as a particular device type.
+ This interfaces can be used to show spear's PCIe device capability.
+
+ Nodes are only visible when configfs is mounted. To mount configfs
+ in /config directory use:
+ # mount -t configfs none /config/
+
+ /config/pcie-gadget/
+ link ... used to enable ltssm and read its status.
+ int_type ...used to configure and read type of supported
+ interrupt
+ no_of_msi ... used to configure number of MSI vector needed and
+ to read no of MSI granted.
+ inta ... write 1 to assert INTA and 0 to de-assert.
+ send_msi ... write MSI vector to be sent.
+ vendor_id ... used to write and read vendor id (hex)
+ device_id ... used to write and read device id (hex)
+ bar0_size ... used to write and read bar0_size
+ bar0_address ... used to write and read bar0 mapped area in hex.
+ bar0_rw_offset ... used to write and read offset of bar0 where
+ bar0_data will be written or read.
+ bar0_data ... used to write and read data at bar0_rw_offset.
diff --git a/Documentation/misc-devices/spear-pcie-gadget.txt b/Documentation/misc-devices/spear-pcie-gadget.txt
new file mode 100644
index 0000000..7b86b80
--- /dev/null
+++ b/Documentation/misc-devices/spear-pcie-gadget.txt
@@ -0,0 +1,129 @@
+Spear PCIe Gadget Driver:
+
+Author
+=============
+Pratyush Anand (***@st.com)
+
+Location
+============
+driver/misc/spear13xx_pcie_gadget.c
+
+Supported Chip:
+===================
+SPEAr1300
+SPEAr1310
+
+Menuconfig option:
+==========================
+Device Drivers
+ Misc devices
+ PCIe gadget support for SPEAr13XX platform
+purpose
+===========
+This driver has several nodes which can be read/written by configfs interface.
+Its main purpose is to configure selected dual mode PCIe controller as device
+and then program its various registers to configure it as a particular device
+type. This driver can be used to show spear's PCIe device capability.
+
+Description of different nodes:
+=================================
+
+read behavior of nodes:
+------------------------------
+link :gives ltssm status.
+int_type :type of supported interrupt
+no_of_msi :zero if MSI is not enabled by host. A positive value is the
+ number of MSI vector granted.
+vendor_id :returns programmed vendor id (hex)
+device_id :returns programmed device id(hex)
+bar0_size: :returns size of bar0 in hex.
+bar0_address :returns address of bar0 mapped area in hex.
+bar0_rw_offset :returns offset of bar0 for which bar0_data will return value.
+bar0_data :returns data at bar0_rw_offset.
+
+write behavior of nodes:
+------------------------------
+link :write UP to enable ltsmm DOWN to disable
+int_type :write interrupt type to be configured and (int_type could be
+ INTA, MSI or NO_INT). Select MSI only when you have programmed
+ no_of_msi node.
+no_of_msi :number of MSI vector needed.
+inta :write 1 to assert INTA and 0 to de-assert.
+send_msi :write MSI vector to be sent.
+vendor_id :write vendor id(hex) to be programmed.
+device_id :write device id(hex) to be programmed.
+bar0_size :write size of bar0 in hex. default bar0 size is 1000 (hex)
+ bytes.
+bar0_address :write address of bar0 mapped area in hex. (default mapping of
+ bar0 is SYSRAM1(E0800000). Always program bar size before bar
+ address. Kernel might modify bar size and address for alignment, so
+ read back bar size and address after writing to cross check.
+bar0_rw_offset :write offset of bar0 for which bar0_data will write value.
+bar0_data :write data to be written at bar0_rw_offset.
+
+Node programming example
+===========================
+Program all PCIe registers in such a way that when this device is connected
+to the PCIe host, then host sees this device as 1MB RAM.
+#mount -t configfs none /Config
+# cd /config/pcie_gadget/
+Now you have all the nodes in this directory.
+program vendor id as 0x104a
+# echo 104A >> vendor_id
+
+program device id as 0xCD80
+# echo CD80 >> device_id
+
+program BAR0 size as 1MB
+# echo 100000 >> bar0_size
+
+check for programmed bar0 size
+# cat bar0_size
+
+Program BAR0 Address as DDR (0x2100000). This is the physical address of
+memory, which is to be made visible to PCIe host. Similarly any other peripheral
+can also be made visible to PCIe host. E.g., if you program base address of UART
+as BAR0 address then when this device will be connected to a host, it will be
+visible as UART.
+# echo 2100000 >> bar0_address
+
+program interrupt type : INTA
+# echo INTA >> int_type
+
+go for link up now.
+# echo UP >> link
+
+It will have to be insured that, once link up is done on gadget, then only host
+is initialized and start to search PCIe devices on its port.
+
+/*wait till link is up*/
+# cat link
+wait till it returns UP.
+
+To assert INTA
+# echo 1 >> inta
+
+To de-assert INTA
+# echo 0 >> inta
+
+if MSI is to be used as interrupt, program no of msi vector needed (say4)
+# echo 4 >> no_of_msi
+
+select MSI as interrupt type
+# echo MSI >> int_type
+
+go for link up now
+# echo UP >> link
+
+wait till link is up
+# cat link
+An application can repetitively read this node till link is found UP. It can
+sleep between two read.
+
+wait till msi is enabled
+# cat no_of_msi
+Should return 4 (number of requested MSI vector)
+
+to send msi vector 2
+# echo 2 >> send_msi
+#cd -
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 4d073f1..dea052d 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -394,6 +394,16 @@ config DS1682
This driver can also be built as a module. If so, the module
will be called ds1682.

+config SPEAR13XX_PCIE_GADGET
+ bool "PCIe gadget support for SPEAr13XX platform"
+ depends on ARCH_SPEAR13XX
+ default n
+ help
+ This option enables gadget support for PCIe controller. If
+ board file defines any controller as PCIe endpoint then a sysfs
+ entry will be created for that controller. User can use these
+ sysfs node to configure PCIe EP as per his requirements.
+
config TI_DAC7512
tristate "Texas Instruments DAC7512"
depends on SPI && SYSFS
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 98009cc..c489536 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_IWMC3200TOP) += iwmc3200top/
obj-$(CONFIG_HMC6352) += hmc6352.o
obj-y += eeprom/
obj-y += cb710/
+obj-$(CONFIG_SPEAR13XX_PCIE_GADGET) += spear13xx_pcie_gadget.o
obj-$(CONFIG_VMWARE_BALLOON) += vmw_balloon.o
obj-$(CONFIG_ARM_CHARLCD) += arm-charlcd.o
obj-$(CONFIG_PCH_PHUB) += pch_phub.o
diff --git a/drivers/misc/spear13xx_pcie_gadget.c b/drivers/misc/spear13xx_pcie_gadget.c
new file mode 100644
index 0000000..ec3b8c9
--- /dev/null
+++ b/drivers/misc/spear13xx_pcie_gadget.c
@@ -0,0 +1,908 @@
+/*
+ * drivers/misc/spear13xx_pcie_gadget.c
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Pratyush Anand<***@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pci_regs.h>
+#include <linux/configfs.h>
+#include <mach/pcie.h>
+#include <mach/misc_regs.h>
+
+#define IN0_MEM_SIZE (200 * 1024 * 1024 - 1)
+/* In current implementation address translation is done using IN0 only.
+ * So IN1 start address and IN0 end address has been kept same
+*/
+#define IN1_MEM_SIZE (0 * 1024 * 1024 - 1)
+#define IN_IO_SIZE (20 * 1024 * 1024 - 1)
+#define IN_CFG0_SIZE (12 * 1024 * 1024 - 1)
+#define IN_CFG1_SIZE (12 * 1024 * 1024 - 1)
+#define IN_MSG_SIZE (12 * 1024 * 1024 - 1)
+/* Keep default BAR size as 4K*/
+/* AORAM would be mapped by default*/
+#define INBOUND_ADDR_MASK (SPEAR13XX_SYSRAM1_SIZE - 1)
+
+#define INT_TYPE_NO_INT 0
+#define INT_TYPE_INTX 1
+#define INT_TYPE_MSI 2
+struct spear_pcie_gadget_config {
+ void __iomem *base;
+ void __iomem *va_app_base;
+ void __iomem *va_dbi_base;
+ char int_type[10];
+ ulong requested_msi;
+ ulong configured_msi;
+ ulong bar0_size;
+ ulong bar0_rw_offset;
+ void __iomem *va_bar0_address;
+};
+
+struct pcie_gadget_target {
+ struct configfs_subsystem subsys;
+ struct spear_pcie_gadget_config config;
+};
+
+struct pcie_gadget_target_attr {
+ struct configfs_attribute attr;
+ ssize_t (*show)(struct spear_pcie_gadget_config *config,
+ char *buf);
+ ssize_t (*store)(struct spear_pcie_gadget_config *config,
+ const char *buf,
+ size_t count);
+};
+
+static void enable_dbi_access(struct pcie_app_reg __iomem *app_reg)
+{
+ /* Enable DBI access */
+ writel(readl(&app_reg->slv_armisc) | (1 << AXI_OP_DBI_ACCESS_ID),
+ &app_reg->slv_armisc);
+ writel(readl(&app_reg->slv_awmisc) | (1 << AXI_OP_DBI_ACCESS_ID),
+ &app_reg->slv_awmisc);
+
+}
+
+static void disable_dbi_access(struct pcie_app_reg __iomem *app_reg)
+{
+ /* disable DBI access */
+ writel(readl(&app_reg->slv_armisc) & ~(1 << AXI_OP_DBI_ACCESS_ID),
+ &app_reg->slv_armisc);
+ writel(readl(&app_reg->slv_awmisc) & ~(1 << AXI_OP_DBI_ACCESS_ID),
+ &app_reg->slv_awmisc);
+
+}
+
+static void spear_dbi_read_reg(struct spear_pcie_gadget_config *config,
+ int where, int size, u32 *val)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+ ulong va_address;
+
+ /* Enable DBI access */
+ enable_dbi_access(app_reg);
+
+ va_address = (ulong)config->va_dbi_base + (where & ~0x3);
+
+ *val = readl(va_address);
+
+ if (size == 1)
+ *val = (*val >> (8 * (where & 3))) & 0xff;
+ else if (size == 2)
+ *val = (*val >> (8 * (where & 3))) & 0xffff;
+
+ /* Disable DBI access */
+ disable_dbi_access(app_reg);
+}
+
+static void spear_dbi_write_reg(struct spear_pcie_gadget_config *config,
+ int where, int size, u32 val)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+ ulong va_address;
+
+ /* Enable DBI access */
+ enable_dbi_access(app_reg);
+
+ va_address = (ulong)config->va_dbi_base + (where & ~0x3);
+
+ if (size == 4)
+ writel(val, va_address);
+ else if (size == 2)
+ writew(val, va_address + (where & 2));
+ else if (size == 1)
+ writeb(val, va_address + (where & 3));
+
+ /* Disable DBI access */
+ disable_dbi_access(app_reg);
+}
+
+#define PCI_FIND_CAP_TTL 48
+
+static int pci_find_own_next_cap_ttl(struct spear_pcie_gadget_config *config,
+ u32 pos, int cap, int *ttl)
+{
+ u32 id;
+
+ while ((*ttl)--) {
+ spear_dbi_read_reg(config, pos, 1, &pos);
+ if (pos < 0x40)
+ break;
+ pos &= ~3;
+ spear_dbi_read_reg(config, pos + PCI_CAP_LIST_ID, 1, &id);
+ if (id == 0xff)
+ break;
+ if (id == cap)
+ return pos;
+ pos += PCI_CAP_LIST_NEXT;
+ }
+ return 0;
+}
+
+static int pci_find_own_next_cap(struct spear_pcie_gadget_config *config,
+ u32 pos, int cap)
+{
+ int ttl = PCI_FIND_CAP_TTL;
+
+ return pci_find_own_next_cap_ttl(config, pos, cap, &ttl);
+}
+
+static int pci_find_own_cap_start(struct spear_pcie_gadget_config *config,
+ u8 hdr_type)
+{
+ u32 status;
+
+ spear_dbi_read_reg(config, PCI_STATUS, 2, &status);
+ if (!(status & PCI_STATUS_CAP_LIST))
+ return 0;
+
+ switch (hdr_type) {
+ case PCI_HEADER_TYPE_NORMAL:
+ case PCI_HEADER_TYPE_BRIDGE:
+ return PCI_CAPABILITY_LIST;
+ case PCI_HEADER_TYPE_CARDBUS:
+ return PCI_CB_CAPABILITY_LIST;
+ default:
+ return 0;
+ }
+
+ return 0;
+}
+
+/*
+ * Tell if a device supports a given PCI capability.
+ * Returns the address of the requested capability structure within the
+ * device's PCI configuration space or 0 in case the device does not
+ * support it. Possible values for @cap:
+ *
+ * %PCI_CAP_ID_PM Power Management
+ * %PCI_CAP_ID_AGP Accelerated Graphics Port
+ * %PCI_CAP_ID_VPD Vital Product Data
+ * %PCI_CAP_ID_SLOTID Slot Identification
+ * %PCI_CAP_ID_MSI Message Signalled Interrupts
+ * %PCI_CAP_ID_CHSWP CompactPCI HotSwap
+ * %PCI_CAP_ID_PCIX PCI-X
+ * %PCI_CAP_ID_EXP PCI Express
+ */
+static int pci_find_own_capability(struct spear_pcie_gadget_config *config,
+ int cap)
+{
+ u32 pos;
+ u32 hdr_type;
+
+ spear_dbi_read_reg(config, PCI_HEADER_TYPE, 1, &hdr_type);
+
+ pos = pci_find_own_cap_start(config, hdr_type);
+ if (pos)
+ pos = pci_find_own_next_cap(config, pos, cap);
+
+ return pos;
+}
+
+static irqreturn_t spear_pcie_gadget_irq(int irq, void *dev_id)
+{
+ return 0;
+}
+
+/*
+ * configfs interfaces show/store functions
+ */
+static ssize_t pcie_gadget_show_link(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+
+ if (readl(&app_reg->app_status_1) & ((u32)1 << XMLH_LINK_UP_ID))
+ return sprintf(buf, "UP");
+ else
+ return sprintf(buf, "DOWN");
+}
+
+static ssize_t pcie_gadget_store_link(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+
+ if (sysfs_streq(buf, "UP"))
+ writel(readl(&app_reg->app_ctrl_0) | (1 << APP_LTSSM_ENABLE_ID),
+ &app_reg->app_ctrl_0);
+ else if (sysfs_streq(buf, "DOWN"))
+ writel(readl(&app_reg->app_ctrl_0)
+ & ~(1 << APP_LTSSM_ENABLE_ID),
+ &app_reg->app_ctrl_0);
+ else
+ return -EINVAL;
+ return count;
+}
+
+static ssize_t pcie_gadget_show_int_type(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ return sprintf(buf, "%s", config->int_type);
+}
+
+static ssize_t pcie_gadget_store_int_type(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ u32 cap, vec, flags;
+ ulong vector;
+
+ if (sysfs_streq(buf, "INTA"))
+ spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 1);
+
+ else if (sysfs_streq(buf, "MSI")) {
+ vector = config->requested_msi;
+ vec = 0;
+ while (vector > 1) {
+ vector /= 2;
+ vec++;
+ }
+ spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 0);
+ cap = pci_find_own_capability(config, PCI_CAP_ID_MSI);
+ spear_dbi_read_reg(config, cap + PCI_MSI_FLAGS, 1, &flags);
+ flags &= ~PCI_MSI_FLAGS_QMASK;
+ flags |= vec << 1;
+ spear_dbi_write_reg(config, cap + PCI_MSI_FLAGS, 1, flags);
+ } else
+ return -EINVAL;
+
+ strcpy(config->int_type, buf);
+
+ return count;
+}
+
+static ssize_t pcie_gadget_show_no_of_msi(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+ u32 cap, vec, flags;
+ ulong vector;
+
+ if ((readl(&app_reg->msg_status) & (1 << CFG_MSI_EN_ID))
+ != (1 << CFG_MSI_EN_ID))
+ vector = 0;
+ else {
+ cap = pci_find_own_capability(config, PCI_CAP_ID_MSI);
+ spear_dbi_read_reg(config, cap + PCI_MSI_FLAGS, 1, &flags);
+ flags &= ~PCI_MSI_FLAGS_QSIZE;
+ vec = flags >> 4;
+ vector = 1;
+ while (vec--)
+ vector *= 2;
+ }
+ config->configured_msi = vector;
+
+ return sprintf(buf, "%lu", vector);
+}
+
+static ssize_t pcie_gadget_store_no_of_msi(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ if (strict_strtoul(buf, 0, &config->requested_msi))
+ return -EINVAL;
+ if (config->requested_msi > 32)
+ config->requested_msi = 32;
+
+ return count;
+}
+
+static ssize_t pcie_gadget_store_inta(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+ ulong en;
+
+ if (strict_strtoul(buf, 0, &en))
+ return -EINVAL;
+
+ if (en)
+ writel(readl(&app_reg->app_ctrl_0) | (1 << SYS_INT_ID),
+ &app_reg->app_ctrl_0);
+ else
+ writel(readl(&app_reg->app_ctrl_0) & ~(1 << SYS_INT_ID),
+ &app_reg->app_ctrl_0);
+
+ return count;
+}
+
+static ssize_t pcie_gadget_store_send_msi(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+ ulong vector;
+ u32 ven_msi;
+
+ if (strict_strtoul(buf, 0, &vector))
+ return -EINVAL;
+
+ if (!config->configured_msi)
+ return -EINVAL;
+
+ if (vector >= config->configured_msi)
+ return -EINVAL;
+
+ ven_msi = readl(&app_reg->ven_msi_1);
+ ven_msi &= ~VEN_MSI_FUN_NUM_MASK;
+ ven_msi |= 0 << VEN_MSI_FUN_NUM_ID;
+ ven_msi &= ~VEN_MSI_TC_MASK;
+ ven_msi |= 0 << VEN_MSI_TC_ID;
+ ven_msi &= ~VEN_MSI_VECTOR_MASK;
+ ven_msi |= vector << VEN_MSI_VECTOR_ID;
+
+ /* generating interrupt for msi vector */
+ ven_msi |= VEN_MSI_REQ_EN;
+ writel(ven_msi, &app_reg->ven_msi_1);
+ udelay(1);
+ ven_msi &= ~VEN_MSI_REQ_EN;
+ writel(ven_msi, &app_reg->ven_msi_1);
+
+ return count;
+}
+
+static ssize_t pcie_gadget_show_vendor_id(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ u32 id;
+
+ spear_dbi_read_reg(config, PCI_VENDOR_ID, 2, &id);
+
+ return sprintf(buf, "%x", id);
+}
+
+static ssize_t pcie_gadget_store_vendor_id(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ ulong id;
+
+ if (strict_strtoul(buf, 0, &id))
+ return -EINVAL;
+
+ spear_dbi_write_reg(config, PCI_VENDOR_ID, 2, id);
+
+ return count;
+}
+
+static ssize_t pcie_gadget_show_device_id(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ u32 id;
+
+ spear_dbi_read_reg(config, PCI_DEVICE_ID, 2, &id);
+
+ return sprintf(buf, "%x", id);
+}
+
+static ssize_t pcie_gadget_store_device_id(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ ulong id;
+
+ if (strict_strtoul(buf, 0, &id))
+ return -EINVAL;
+
+ spear_dbi_write_reg(config, PCI_DEVICE_ID, 2, id);
+
+ return count;
+}
+
+static ssize_t pcie_gadget_show_bar0_size(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ return sprintf(buf, "%lx", config->bar0_size);
+}
+
+static ssize_t pcie_gadget_store_bar0_size(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ ulong size;
+ u32 pos, pos1;
+ u32 no_of_bit = 0;
+
+ if (strict_strtoul(buf, 0, &size))
+ return -EINVAL;
+ /* min bar size is 256 */
+ if (size <= 0x100)
+ size = 0x100;
+ /* max bar size is 1MB*/
+ else if (size >= 0x100000)
+ size = 0x100000;
+ else {
+ pos = 0;
+ pos1 = 0;
+ while (pos < 21) {
+ pos = find_next_bit((ulong *)&size, 21, pos);
+ if (pos != 21)
+ pos1 = pos + 1;
+ pos++;
+ no_of_bit++;
+ }
+ if (no_of_bit == 2)
+ pos1--;
+
+ size = 1 << pos1;
+ }
+ config->bar0_size = size;
+ spear_dbi_write_reg(config, PCIE_BAR0_MASK_REG, 4, size - 1);
+
+ return count;
+}
+
+static ssize_t pcie_gadget_show_bar0_address(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+
+ u32 address = readl(&app_reg->pim0_mem_addr_start);
+
+ return sprintf(buf, "%x", address);
+}
+
+static ssize_t pcie_gadget_store_bar0_address(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+ ulong address;
+
+ if (strict_strtoul(buf, 0, &address))
+ return -EINVAL;
+
+ address &= ~(config->bar0_size - 1);
+ if (config->va_bar0_address)
+ iounmap(config->va_bar0_address);
+ config->va_bar0_address = ioremap(address, config->bar0_size);
+ if (!config->va_bar0_address)
+ return -ENOMEM;
+
+ writel(address, &app_reg->pim0_mem_addr_start);
+
+ return count;
+}
+
+static ssize_t pcie_gadget_show_bar0_rw_offset(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ return sprintf(buf, "%lx", config->bar0_rw_offset);
+}
+
+static ssize_t pcie_gadget_store_bar0_rw_offset(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ ulong offset;
+
+ if (strict_strtoul(buf, 0, &offset))
+ return -EINVAL;
+
+ if (offset % 4)
+ return -EINVAL;
+
+ config->bar0_rw_offset = offset;
+
+ return count;
+}
+
+static ssize_t pcie_gadget_show_bar0_data(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ ulong data;
+
+ if (!config->va_bar0_address)
+ return -ENOMEM;
+
+ data = readl((ulong)config->va_bar0_address + config->bar0_rw_offset);
+
+ return sprintf(buf, "%lx", data);
+}
+
+static ssize_t pcie_gadget_store_bar0_data(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ ulong data;
+
+ if (strict_strtoul(buf, 0, &data))
+ return -EINVAL;
+
+ if (!config->va_bar0_address)
+ return -ENOMEM;
+
+ writel(data, (ulong)config->va_bar0_address + config->bar0_rw_offset);
+
+ return count;
+}
+
+/*
+ * Attribute definitions.
+ */
+
+#define PCIE_GADGET_TARGET_ATTR_RO(_name) \
+static struct pcie_gadget_target_attr pcie_gadget_target_##_name = \
+ __CONFIGFS_ATTR(_name, S_IRUGO, pcie_gadget_show_##_name, NULL)
+
+#define PCIE_GADGET_TARGET_ATTR_WO(_name) \
+static struct pcie_gadget_target_attr pcie_gadget_target_##_name = \
+ __CONFIGFS_ATTR(_name, S_IWUSR, NULL, pcie_gadget_store_##_name)
+
+#define PCIE_GADGET_TARGET_ATTR_RW(_name) \
+static struct pcie_gadget_target_attr pcie_gadget_target_##_name = \
+ __CONFIGFS_ATTR(_name, S_IRUGO | S_IWUSR, pcie_gadget_show_##_name, \
+ pcie_gadget_store_##_name)
+PCIE_GADGET_TARGET_ATTR_RW(link);
+PCIE_GADGET_TARGET_ATTR_RW(int_type);
+PCIE_GADGET_TARGET_ATTR_RW(no_of_msi);
+PCIE_GADGET_TARGET_ATTR_WO(inta);
+PCIE_GADGET_TARGET_ATTR_WO(send_msi);
+PCIE_GADGET_TARGET_ATTR_RW(vendor_id);
+PCIE_GADGET_TARGET_ATTR_RW(device_id);
+PCIE_GADGET_TARGET_ATTR_RW(bar0_size);
+PCIE_GADGET_TARGET_ATTR_RW(bar0_address);
+PCIE_GADGET_TARGET_ATTR_RW(bar0_rw_offset);
+PCIE_GADGET_TARGET_ATTR_RW(bar0_data);
+
+static struct configfs_attribute *pcie_gadget_target_attrs[] = {
+ &pcie_gadget_target_link.attr,
+ &pcie_gadget_target_int_type.attr,
+ &pcie_gadget_target_no_of_msi.attr,
+ &pcie_gadget_target_inta.attr,
+ &pcie_gadget_target_send_msi.attr,
+ &pcie_gadget_target_vendor_id.attr,
+ &pcie_gadget_target_device_id.attr,
+ &pcie_gadget_target_bar0_size.attr,
+ &pcie_gadget_target_bar0_address.attr,
+ &pcie_gadget_target_bar0_rw_offset.attr,
+ &pcie_gadget_target_bar0_data.attr,
+ NULL,
+};
+
+static struct pcie_gadget_target *to_target(struct config_item *item)
+{
+ return item ?
+ container_of(to_configfs_subsystem(to_config_group(item)),
+ struct pcie_gadget_target, subsys) : NULL;
+}
+
+/*
+ * Item operations and type for pcie_gadget_target.
+ */
+
+static ssize_t pcie_gadget_target_attr_show(struct config_item *item,
+ struct configfs_attribute *attr,
+ char *buf)
+{
+ ssize_t ret = -EINVAL;
+ struct pcie_gadget_target *target = to_target(item);
+ struct pcie_gadget_target_attr *t_attr =
+ container_of(attr, struct pcie_gadget_target_attr, attr);
+
+ if (t_attr->show)
+ ret = t_attr->show(&target->config, buf);
+ return ret;
+}
+
+static ssize_t pcie_gadget_target_attr_store(struct config_item *item,
+ struct configfs_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ ssize_t ret = -EINVAL;
+ struct pcie_gadget_target *target = to_target(item);
+ struct pcie_gadget_target_attr *t_attr =
+ container_of(attr, struct pcie_gadget_target_attr, attr);
+
+ if (t_attr->store)
+ ret = t_attr->store(&target->config, buf, count);
+ return ret;
+}
+
+static struct configfs_item_operations pcie_gadget_target_item_ops = {
+ .show_attribute = pcie_gadget_target_attr_show,
+ .store_attribute = pcie_gadget_target_attr_store,
+};
+
+static struct config_item_type pcie_gadget_target_type = {
+ .ct_attrs = pcie_gadget_target_attrs,
+ .ct_item_ops = &pcie_gadget_target_item_ops,
+ .ct_owner = THIS_MODULE,
+};
+
+static void spear13xx_pcie_device_init(struct spear_pcie_gadget_config *config)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+
+ /*setup registers for outbound translation */
+
+ writel(config->base, &app_reg->in0_mem_addr_start);
+ writel(app_reg->in0_mem_addr_start + IN0_MEM_SIZE,
+ &app_reg->in0_mem_addr_limit);
+ writel(app_reg->in0_mem_addr_limit + 1, &app_reg->in1_mem_addr_start);
+ writel(app_reg->in1_mem_addr_start + IN1_MEM_SIZE,
+ &app_reg->in1_mem_addr_limit);
+ writel(app_reg->in1_mem_addr_limit + 1, &app_reg->in_io_addr_start);
+ writel(app_reg->in_io_addr_start + IN_IO_SIZE,
+ &app_reg->in_io_addr_limit);
+ writel(app_reg->in_io_addr_limit + 1, &app_reg->in_cfg0_addr_start);
+ writel(app_reg->in_cfg0_addr_start + IN_CFG0_SIZE,
+ &app_reg->in_cfg0_addr_limit);
+ writel(app_reg->in_cfg0_addr_limit + 1, &app_reg->in_cfg1_addr_start);
+ writel(app_reg->in_cfg1_addr_start + IN_CFG1_SIZE,
+ &app_reg->in_cfg1_addr_limit);
+ writel(app_reg->in_cfg1_addr_limit + 1, &app_reg->in_msg_addr_start);
+ writel(app_reg->in_msg_addr_start + IN_MSG_SIZE,
+ &app_reg->in_msg_addr_limit);
+
+ writel(app_reg->in0_mem_addr_start, &app_reg->pom0_mem_addr_start);
+ writel(app_reg->in1_mem_addr_start, &app_reg->pom1_mem_addr_start);
+ writel(app_reg->in_io_addr_start, &app_reg->pom_io_addr_start);
+
+ /*setup registers for inbound translation */
+
+ /* Keep AORAM mapped at BAR0 as default */
+ config->bar0_size = INBOUND_ADDR_MASK + 1;
+ spear_dbi_write_reg(config, PCIE_BAR0_MASK_REG, 4, INBOUND_ADDR_MASK);
+ spear_dbi_write_reg(config, PCI_BASE_ADDRESS_0, 4, 0xC);
+ config->va_bar0_address = ioremap(SPEAR13XX_SYSRAM1_BASE,
+ config->bar0_size);
+
+ writel(SPEAR13XX_SYSRAM1_BASE, &app_reg->pim0_mem_addr_start);
+ writel(0, &app_reg->pim1_mem_addr_start);
+ writel(INBOUND_ADDR_MASK + 1, &app_reg->mem0_addr_offset_limit);
+
+ writel(0x0, &app_reg->pim_io_addr_start);
+ writel(0x0, &app_reg->pim_io_addr_start);
+ writel(0x0, &app_reg->pim_rom_addr_start);
+
+ writel(DEVICE_TYPE_EP | (1 << MISCTRL_EN_ID)
+ | ((u32)1 << REG_TRANSLATION_ENABLE),
+ &app_reg->app_ctrl_0);
+ /* disable all rx interrupts */
+ writel(0, &app_reg->int_mask);
+
+ /* Select INTA as default*/
+ spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 1);
+}
+
+static int __devinit spear_pcie_gadget_probe(struct platform_device *pdev)
+{
+ struct resource *res0, *res1;
+ unsigned int status = 0;
+ int irq;
+ struct clk *clk;
+ static struct pcie_gadget_target *target;
+ struct spear_pcie_gadget_config *config;
+ struct config_item *cg_item;
+ struct configfs_subsystem *subsys;
+
+ /* get resource for application registers*/
+
+ res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res0) {
+ dev_err(&pdev->dev, "no resource defined\n");
+ return -EBUSY;
+ }
+ if (!request_mem_region(res0->start, resource_size(res0),
+ pdev->name)) {
+ dev_err(&pdev->dev, "pcie gadget region already claimed\n");
+ return -EBUSY;
+ }
+ /* get resource for dbi registers*/
+
+ res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res1) {
+ dev_err(&pdev->dev, "no resource defined\n");
+ goto err_rel_res0;
+ }
+ if (!request_mem_region(res1->start, resource_size(res1),
+ pdev->name)) {
+ dev_err(&pdev->dev, "pcie gadget region already claimed\n");
+ goto err_rel_res0;
+ }
+
+ target = kzalloc(sizeof(*target), GFP_KERNEL);
+ if (!target) {
+ dev_err(&pdev->dev, "out of memory\n");
+ status = -ENOMEM;
+ goto err_rel_res;
+ }
+
+ cg_item = &target->subsys.su_group.cg_item;
+ sprintf(cg_item->ci_namebuf, "pcie_gadget.%d", pdev->id);
+ cg_item->ci_type = &pcie_gadget_target_type;
+ config = &target->config;
+ config->va_app_base = (void __iomem *)ioremap(res0->start,
+ resource_size(res0));
+ if (!config->va_app_base) {
+ dev_err(&pdev->dev, "ioremap fail\n");
+ status = -ENOMEM;
+ goto err_kzalloc;
+ }
+
+ config->base = (void __iomem *)res1->start;
+
+ config->va_dbi_base = (void __iomem *)ioremap(res1->start,
+ resource_size(res1));
+ if (!config->va_dbi_base) {
+ dev_err(&pdev->dev, "ioremap fail\n");
+ status = -ENOMEM;
+ goto err_iounmap_app;
+ }
+
+ dev_set_drvdata(&pdev->dev, target);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "no update irq?\n");
+ status = irq;
+ goto err_iounmap;
+ }
+
+ status = request_irq(irq, spear_pcie_gadget_irq, 0, pdev->name, NULL);
+ if (status) {
+ dev_err(&pdev->dev, "pcie gadget interrupt IRQ%d already \
+ claimed\n", irq);
+ goto err_iounmap;
+ }
+
+ /* Register configfs hooks */
+ subsys = &target->subsys;
+ config_group_init(&subsys->su_group);
+ mutex_init(&subsys->su_mutex);
+ status = configfs_register_subsystem(subsys);
+ if (status)
+ goto err_irq;
+
+ /*
+ * init basic pcie application registers
+ * do not enable clock if it is PCIE0.Ideally , all controller should
+ * have been independent from others with respect to clock. But PCIE1
+ * and 2 depends on PCIE0.So PCIE0 clk is provided during board init.
+ */
+ if (pdev->id == 1) {
+ /*
+ * Ideally CFG Clock should have been also enabled here. But
+ * it is done currently during board init routne
+ */
+ clk = clk_get_sys("pcie1", NULL);
+ if (IS_ERR(clk)) {
+ pr_err("%s:couldn't get clk for pcie1\n", __func__);
+ goto err_irq;
+ }
+ if (clk_enable(clk)) {
+ pr_err("%s:couldn't enable clk for pcie1\n", __func__);
+ goto err_irq;
+ }
+ } else if (pdev->id == 2) {
+ /*
+ * Ideally CFG Clock should have been also enabled here. But
+ * it is done currently during board init routne
+ */
+ clk = clk_get_sys("pcie2", NULL);
+ if (IS_ERR(clk)) {
+ pr_err("%s:couldn't get clk for pcie2\n", __func__);
+ goto err_irq;
+ }
+ if (clk_enable(clk)) {
+ pr_err("%s:couldn't enable clk for pcie2\n", __func__);
+ goto err_irq;
+ }
+ }
+ spear13xx_pcie_device_init(config);
+
+ return 0;
+err_irq:
+ free_irq(irq, NULL);
+err_iounmap:
+ iounmap(config->va_dbi_base);
+err_iounmap_app:
+ iounmap(config->va_app_base);
+err_kzalloc:
+ kfree(config);
+err_rel_res:
+ release_mem_region(res1->start, resource_size(res1));
+err_rel_res0:
+ release_mem_region(res0->start, resource_size(res0));
+ return status;
+}
+
+static int __devexit spear_pcie_gadget_remove(struct platform_device *pdev)
+{
+ struct resource *res0, *res1;
+ static struct pcie_gadget_target *target;
+ struct spear_pcie_gadget_config *config;
+ int irq;
+
+ res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ irq = platform_get_irq(pdev, 0);
+ target = dev_get_drvdata(&pdev->dev);
+ config = &target->config;
+
+ free_irq(irq, NULL);
+ iounmap(config->va_dbi_base);
+ iounmap(config->va_app_base);
+ release_mem_region(res1->start, resource_size(res1));
+ release_mem_region(res0->start, resource_size(res0));
+ configfs_unregister_subsystem(&target->subsys);
+ kfree(target);
+
+ return 0;
+}
+
+static void spear_pcie_gadget_shutdown(struct platform_device *pdev)
+{
+}
+
+static struct platform_driver spear_pcie_gadget_driver = {
+ .probe = spear_pcie_gadget_probe,
+ .remove = spear_pcie_gadget_remove,
+ .shutdown = spear_pcie_gadget_shutdown,
+ .driver = {
+ .name = "pcie-gadget-spear",
+ .bus = &platform_bus_type
+ },
+};
+
+static int __init spear_pcie_gadget_init(void)
+{
+ return platform_driver_register(&spear_pcie_gadget_driver);
+}
+module_init(spear_pcie_gadget_init);
+
+static void __exit spear_pcie_gadget_exit(void)
+{
+ platform_driver_unregister(&spear_pcie_gadget_driver);
+}
+module_exit(spear_pcie_gadget_exit);
+
+MODULE_ALIAS("pcie-gadget-spear");
+MODULE_AUTHOR("Pratyush Anand");
+MODULE_LICENSE("GPL");
--
1.6.0.2
pratyush
2011-02-21 08:17:42 UTC
Permalink
Sorry, Please discard this patch.

Regards
Pratyush
Post by y***@vger.kernel.org
This is a configurable gadget. can be configured by configfs interface. Any
IP available at PCIE bus can be programmed to be used by host
controller.It supoorts both INTX and MSI.
By default, gadget is configured for INTX and SYSRAM1 is mapped to BAR0
with size 0x1000
- All documentation related comments incorporated
- support for multiple instances of such device
- changes to minimzie portability issue on 64 bit machine
- unnecessary typecast removed
- sysfs_streq used in place of complex code
- driver has been moved from sysfs to configfs
- Documentation/ABI directory has also been updated
- typo error in documenation has been corrected
- clk value is checked after encapsulating by IS_ERR
- __iomem added for register addresses
- kerneldoc comment removed whereever not required.
- help node moved from sysfs to documentation/misc-devices
- strict_strtoul used instead of sscanf
---
.../ABI/testing/configfs-spear-pcie-gadget | 30 +
Documentation/misc-devices/spear-pcie-gadget.txt | 129 +++
drivers/misc/Kconfig | 10 +
drivers/misc/Makefile | 1 +
drivers/misc/spear13xx_pcie_gadget.c | 908 ++++++++++++++++++++
5 files changed, 1078 insertions(+), 0 deletions(-)
create mode 100644 Documentation/ABI/testing/configfs-spear-pcie-gadget
create mode 100644 Documentation/misc-devices/spear-pcie-gadget.txt
create mode 100644 drivers/misc/spear13xx_pcie_gadget.c
diff --git a/Documentation/ABI/testing/configfs-spear-pcie-gadget b/Documentation/ABI/testing/configfs-spear-pcie-gadget
new file mode 100644
index 0000000..29593d0
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-spear-pcie-gadget
@@ -0,0 +1,30 @@
+What: /config/pcie-gadget
+Date: Feb 2011
+KernelVersion: 2.6.37
+
+ Interface is used to configure selected dual mode PCIe controller
+ as device and then program its various registers to configure it
+ as a particular device type.
+ This interfaces can be used to show spear's PCIe device capability.
+
+ Nodes are only visible when configfs is mounted. To mount configfs
+ # mount -t configfs none /config/
+
+ /config/pcie-gadget/
+ link ... used to enable ltssm and read its status.
+ int_type ...used to configure and read type of supported
+ interrupt
+ no_of_msi ... used to configure number of MSI vector needed and
+ to read no of MSI granted.
+ inta ... write 1 to assert INTA and 0 to de-assert.
+ send_msi ... write MSI vector to be sent.
+ vendor_id ... used to write and read vendor id (hex)
+ device_id ... used to write and read device id (hex)
+ bar0_size ... used to write and read bar0_size
+ bar0_address ... used to write and read bar0 mapped area in hex.
+ bar0_rw_offset ... used to write and read offset of bar0 where
+ bar0_data will be written or read.
+ bar0_data ... used to write and read data at bar0_rw_offset.
diff --git a/Documentation/misc-devices/spear-pcie-gadget.txt b/Documentation/misc-devices/spear-pcie-gadget.txt
new file mode 100644
index 0000000..7b86b80
--- /dev/null
+++ b/Documentation/misc-devices/spear-pcie-gadget.txt
@@ -0,0 +1,129 @@
+
+Author
+=============
+
+Location
+============
+driver/misc/spear13xx_pcie_gadget.c
+
+===================
+SPEAr1300
+SPEAr1310
+
+==========================
+Device Drivers
+ Misc devices
+ PCIe gadget support for SPEAr13XX platform
+purpose
+===========
+This driver has several nodes which can be read/written by configfs interface.
+Its main purpose is to configure selected dual mode PCIe controller as device
+and then program its various registers to configure it as a particular device
+type. This driver can be used to show spear's PCIe device capability.
+
+=================================
+
+------------------------------
+link :gives ltssm status.
+int_type :type of supported interrupt
+no_of_msi :zero if MSI is not enabled by host. A positive value is the
+ number of MSI vector granted.
+vendor_id :returns programmed vendor id (hex)
+device_id :returns programmed device id(hex)
+bar0_size: :returns size of bar0 in hex.
+bar0_address :returns address of bar0 mapped area in hex.
+bar0_rw_offset :returns offset of bar0 for which bar0_data will return value.
+bar0_data :returns data at bar0_rw_offset.
+
+------------------------------
+link :write UP to enable ltsmm DOWN to disable
+int_type :write interrupt type to be configured and (int_type could be
+ INTA, MSI or NO_INT). Select MSI only when you have programmed
+ no_of_msi node.
+no_of_msi :number of MSI vector needed.
+inta :write 1 to assert INTA and 0 to de-assert.
+send_msi :write MSI vector to be sent.
+vendor_id :write vendor id(hex) to be programmed.
+device_id :write device id(hex) to be programmed.
+bar0_size :write size of bar0 in hex. default bar0 size is 1000 (hex)
+ bytes.
+bar0_address :write address of bar0 mapped area in hex. (default mapping of
+ bar0 is SYSRAM1(E0800000). Always program bar size before bar
+ address. Kernel might modify bar size and address for alignment, so
+ read back bar size and address after writing to cross check.
+bar0_rw_offset :write offset of bar0 for which bar0_data will write value.
+bar0_data :write data to be written at bar0_rw_offset.
+
+Node programming example
+===========================
+Program all PCIe registers in such a way that when this device is connected
+to the PCIe host, then host sees this device as 1MB RAM.
+#mount -t configfs none /Config
+# cd /config/pcie_gadget/
+Now you have all the nodes in this directory.
+program vendor id as 0x104a
+# echo 104A >> vendor_id
+
+program device id as 0xCD80
+# echo CD80 >> device_id
+
+program BAR0 size as 1MB
+# echo 100000 >> bar0_size
+
+check for programmed bar0 size
+# cat bar0_size
+
+Program BAR0 Address as DDR (0x2100000). This is the physical address of
+memory, which is to be made visible to PCIe host. Similarly any other peripheral
+can also be made visible to PCIe host. E.g., if you program base address of UART
+as BAR0 address then when this device will be connected to a host, it will be
+visible as UART.
+# echo 2100000 >> bar0_address
+
+program interrupt type : INTA
+# echo INTA >> int_type
+
+go for link up now.
+# echo UP >> link
+
+It will have to be insured that, once link up is done on gadget, then only host
+is initialized and start to search PCIe devices on its port.
+
+/*wait till link is up*/
+# cat link
+wait till it returns UP.
+
+To assert INTA
+# echo 1 >> inta
+
+To de-assert INTA
+# echo 0 >> inta
+
+if MSI is to be used as interrupt, program no of msi vector needed (say4)
+# echo 4 >> no_of_msi
+
+select MSI as interrupt type
+# echo MSI >> int_type
+
+go for link up now
+# echo UP >> link
+
+wait till link is up
+# cat link
+An application can repetitively read this node till link is found UP. It can
+sleep between two read.
+
+wait till msi is enabled
+# cat no_of_msi
+Should return 4 (number of requested MSI vector)
+
+to send msi vector 2
+# echo 2 >> send_msi
+#cd -
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 4d073f1..dea052d 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -394,6 +394,16 @@ config DS1682
This driver can also be built as a module. If so, the module
will be called ds1682.
+config SPEAR13XX_PCIE_GADGET
+ bool "PCIe gadget support for SPEAr13XX platform"
+ depends on ARCH_SPEAR13XX
+ default n
+ help
+ This option enables gadget support for PCIe controller. If
+ board file defines any controller as PCIe endpoint then a sysfs
+ entry will be created for that controller. User can use these
+ sysfs node to configure PCIe EP as per his requirements.
+
config TI_DAC7512
tristate "Texas Instruments DAC7512"
depends on SPI && SYSFS
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 98009cc..c489536 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_IWMC3200TOP) += iwmc3200top/
obj-$(CONFIG_HMC6352) += hmc6352.o
obj-y += eeprom/
obj-y += cb710/
+obj-$(CONFIG_SPEAR13XX_PCIE_GADGET) += spear13xx_pcie_gadget.o
obj-$(CONFIG_VMWARE_BALLOON) += vmw_balloon.o
obj-$(CONFIG_ARM_CHARLCD) += arm-charlcd.o
obj-$(CONFIG_PCH_PHUB) += pch_phub.o
diff --git a/drivers/misc/spear13xx_pcie_gadget.c b/drivers/misc/spear13xx_pcie_gadget.c
new file mode 100644
index 0000000..ec3b8c9
--- /dev/null
+++ b/drivers/misc/spear13xx_pcie_gadget.c
@@ -0,0 +1,908 @@
+/*
+ * drivers/misc/spear13xx_pcie_gadget.c
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pci_regs.h>
+#include <linux/configfs.h>
+#include <mach/pcie.h>
+#include <mach/misc_regs.h>
+
+#define IN0_MEM_SIZE (200 * 1024 * 1024 - 1)
+/* In current implementation address translation is done using IN0 only.
+ * So IN1 start address and IN0 end address has been kept same
+*/
+#define IN1_MEM_SIZE (0 * 1024 * 1024 - 1)
+#define IN_IO_SIZE (20 * 1024 * 1024 - 1)
+#define IN_CFG0_SIZE (12 * 1024 * 1024 - 1)
+#define IN_CFG1_SIZE (12 * 1024 * 1024 - 1)
+#define IN_MSG_SIZE (12 * 1024 * 1024 - 1)
+/* Keep default BAR size as 4K*/
+/* AORAM would be mapped by default*/
+#define INBOUND_ADDR_MASK (SPEAR13XX_SYSRAM1_SIZE - 1)
+
+#define INT_TYPE_NO_INT 0
+#define INT_TYPE_INTX 1
+#define INT_TYPE_MSI 2
+struct spear_pcie_gadget_config {
+ void __iomem *base;
+ void __iomem *va_app_base;
+ void __iomem *va_dbi_base;
+ char int_type[10];
+ ulong requested_msi;
+ ulong configured_msi;
+ ulong bar0_size;
+ ulong bar0_rw_offset;
+ void __iomem *va_bar0_address;
+};
+
+struct pcie_gadget_target {
+ struct configfs_subsystem subsys;
+ struct spear_pcie_gadget_config config;
+};
+
+struct pcie_gadget_target_attr {
+ struct configfs_attribute attr;
+ ssize_t (*show)(struct spear_pcie_gadget_config *config,
+ char *buf);
+ ssize_t (*store)(struct spear_pcie_gadget_config *config,
+ const char *buf,
+ size_t count);
+};
+
+static void enable_dbi_access(struct pcie_app_reg __iomem *app_reg)
+{
+ /* Enable DBI access */
+ writel(readl(&app_reg->slv_armisc) | (1 << AXI_OP_DBI_ACCESS_ID),
+ &app_reg->slv_armisc);
+ writel(readl(&app_reg->slv_awmisc) | (1 << AXI_OP_DBI_ACCESS_ID),
+ &app_reg->slv_awmisc);
+
+}
+
+static void disable_dbi_access(struct pcie_app_reg __iomem *app_reg)
+{
+ /* disable DBI access */
+ writel(readl(&app_reg->slv_armisc) & ~(1 << AXI_OP_DBI_ACCESS_ID),
+ &app_reg->slv_armisc);
+ writel(readl(&app_reg->slv_awmisc) & ~(1 << AXI_OP_DBI_ACCESS_ID),
+ &app_reg->slv_awmisc);
+
+}
+
+static void spear_dbi_read_reg(struct spear_pcie_gadget_config *config,
+ int where, int size, u32 *val)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+ ulong va_address;
+
+ /* Enable DBI access */
+ enable_dbi_access(app_reg);
+
+ va_address = (ulong)config->va_dbi_base + (where & ~0x3);
+
+ *val = readl(va_address);
+
+ if (size == 1)
+ *val = (*val >> (8 * (where & 3))) & 0xff;
+ else if (size == 2)
+ *val = (*val >> (8 * (where & 3))) & 0xffff;
+
+ /* Disable DBI access */
+ disable_dbi_access(app_reg);
+}
+
+static void spear_dbi_write_reg(struct spear_pcie_gadget_config *config,
+ int where, int size, u32 val)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+ ulong va_address;
+
+ /* Enable DBI access */
+ enable_dbi_access(app_reg);
+
+ va_address = (ulong)config->va_dbi_base + (where & ~0x3);
+
+ if (size == 4)
+ writel(val, va_address);
+ else if (size == 2)
+ writew(val, va_address + (where & 2));
+ else if (size == 1)
+ writeb(val, va_address + (where & 3));
+
+ /* Disable DBI access */
+ disable_dbi_access(app_reg);
+}
+
+#define PCI_FIND_CAP_TTL 48
+
+static int pci_find_own_next_cap_ttl(struct spear_pcie_gadget_config *config,
+ u32 pos, int cap, int *ttl)
+{
+ u32 id;
+
+ while ((*ttl)--) {
+ spear_dbi_read_reg(config, pos, 1, &pos);
+ if (pos < 0x40)
+ break;
+ pos &= ~3;
+ spear_dbi_read_reg(config, pos + PCI_CAP_LIST_ID, 1, &id);
+ if (id == 0xff)
+ break;
+ if (id == cap)
+ return pos;
+ pos += PCI_CAP_LIST_NEXT;
+ }
+ return 0;
+}
+
+static int pci_find_own_next_cap(struct spear_pcie_gadget_config *config,
+ u32 pos, int cap)
+{
+ int ttl = PCI_FIND_CAP_TTL;
+
+ return pci_find_own_next_cap_ttl(config, pos, cap, &ttl);
+}
+
+static int pci_find_own_cap_start(struct spear_pcie_gadget_config *config,
+ u8 hdr_type)
+{
+ u32 status;
+
+ spear_dbi_read_reg(config, PCI_STATUS, 2, &status);
+ if (!(status & PCI_STATUS_CAP_LIST))
+ return 0;
+
+ switch (hdr_type) {
+ return PCI_CAPABILITY_LIST;
+ return PCI_CB_CAPABILITY_LIST;
+ return 0;
+ }
+
+ return 0;
+}
+
+/*
+ * Tell if a device supports a given PCI capability.
+ * Returns the address of the requested capability structure within the
+ * device's PCI configuration space or 0 in case the device does not
+ *
+ * %PCI_CAP_ID_PM Power Management
+ * %PCI_CAP_ID_AGP Accelerated Graphics Port
+ * %PCI_CAP_ID_VPD Vital Product Data
+ * %PCI_CAP_ID_SLOTID Slot Identification
+ * %PCI_CAP_ID_MSI Message Signalled Interrupts
+ * %PCI_CAP_ID_CHSWP CompactPCI HotSwap
+ * %PCI_CAP_ID_PCIX PCI-X
+ * %PCI_CAP_ID_EXP PCI Express
+ */
+static int pci_find_own_capability(struct spear_pcie_gadget_config *config,
+ int cap)
+{
+ u32 pos;
+ u32 hdr_type;
+
+ spear_dbi_read_reg(config, PCI_HEADER_TYPE, 1, &hdr_type);
+
+ pos = pci_find_own_cap_start(config, hdr_type);
+ if (pos)
+ pos = pci_find_own_next_cap(config, pos, cap);
+
+ return pos;
+}
+
+static irqreturn_t spear_pcie_gadget_irq(int irq, void *dev_id)
+{
+ return 0;
+}
+
+/*
+ * configfs interfaces show/store functions
+ */
+static ssize_t pcie_gadget_show_link(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+
+ if (readl(&app_reg->app_status_1) & ((u32)1 << XMLH_LINK_UP_ID))
+ return sprintf(buf, "UP");
+ else
+ return sprintf(buf, "DOWN");
+}
+
+static ssize_t pcie_gadget_store_link(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+
+ if (sysfs_streq(buf, "UP"))
+ writel(readl(&app_reg->app_ctrl_0) | (1 << APP_LTSSM_ENABLE_ID),
+ &app_reg->app_ctrl_0);
+ else if (sysfs_streq(buf, "DOWN"))
+ writel(readl(&app_reg->app_ctrl_0)
+ & ~(1 << APP_LTSSM_ENABLE_ID),
+ &app_reg->app_ctrl_0);
+ else
+ return -EINVAL;
+ return count;
+}
+
+static ssize_t pcie_gadget_show_int_type(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ return sprintf(buf, "%s", config->int_type);
+}
+
+static ssize_t pcie_gadget_store_int_type(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ u32 cap, vec, flags;
+ ulong vector;
+
+ if (sysfs_streq(buf, "INTA"))
+ spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 1);
+
+ else if (sysfs_streq(buf, "MSI")) {
+ vector = config->requested_msi;
+ vec = 0;
+ while (vector > 1) {
+ vector /= 2;
+ vec++;
+ }
+ spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 0);
+ cap = pci_find_own_capability(config, PCI_CAP_ID_MSI);
+ spear_dbi_read_reg(config, cap + PCI_MSI_FLAGS, 1, &flags);
+ flags &= ~PCI_MSI_FLAGS_QMASK;
+ flags |= vec << 1;
+ spear_dbi_write_reg(config, cap + PCI_MSI_FLAGS, 1, flags);
+ } else
+ return -EINVAL;
+
+ strcpy(config->int_type, buf);
+
+ return count;
+}
+
+static ssize_t pcie_gadget_show_no_of_msi(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+ u32 cap, vec, flags;
+ ulong vector;
+
+ if ((readl(&app_reg->msg_status) & (1 << CFG_MSI_EN_ID))
+ != (1 << CFG_MSI_EN_ID))
+ vector = 0;
+ else {
+ cap = pci_find_own_capability(config, PCI_CAP_ID_MSI);
+ spear_dbi_read_reg(config, cap + PCI_MSI_FLAGS, 1, &flags);
+ flags &= ~PCI_MSI_FLAGS_QSIZE;
+ vec = flags >> 4;
+ vector = 1;
+ while (vec--)
+ vector *= 2;
+ }
+ config->configured_msi = vector;
+
+ return sprintf(buf, "%lu", vector);
+}
+
+static ssize_t pcie_gadget_store_no_of_msi(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ if (strict_strtoul(buf, 0, &config->requested_msi))
+ return -EINVAL;
+ if (config->requested_msi > 32)
+ config->requested_msi = 32;
+
+ return count;
+}
+
+static ssize_t pcie_gadget_store_inta(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+ ulong en;
+
+ if (strict_strtoul(buf, 0, &en))
+ return -EINVAL;
+
+ if (en)
+ writel(readl(&app_reg->app_ctrl_0) | (1 << SYS_INT_ID),
+ &app_reg->app_ctrl_0);
+ else
+ writel(readl(&app_reg->app_ctrl_0) & ~(1 << SYS_INT_ID),
+ &app_reg->app_ctrl_0);
+
+ return count;
+}
+
+static ssize_t pcie_gadget_store_send_msi(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+ ulong vector;
+ u32 ven_msi;
+
+ if (strict_strtoul(buf, 0, &vector))
+ return -EINVAL;
+
+ if (!config->configured_msi)
+ return -EINVAL;
+
+ if (vector >= config->configured_msi)
+ return -EINVAL;
+
+ ven_msi = readl(&app_reg->ven_msi_1);
+ ven_msi &= ~VEN_MSI_FUN_NUM_MASK;
+ ven_msi |= 0 << VEN_MSI_FUN_NUM_ID;
+ ven_msi &= ~VEN_MSI_TC_MASK;
+ ven_msi |= 0 << VEN_MSI_TC_ID;
+ ven_msi &= ~VEN_MSI_VECTOR_MASK;
+ ven_msi |= vector << VEN_MSI_VECTOR_ID;
+
+ /* generating interrupt for msi vector */
+ ven_msi |= VEN_MSI_REQ_EN;
+ writel(ven_msi, &app_reg->ven_msi_1);
+ udelay(1);
+ ven_msi &= ~VEN_MSI_REQ_EN;
+ writel(ven_msi, &app_reg->ven_msi_1);
+
+ return count;
+}
+
+static ssize_t pcie_gadget_show_vendor_id(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ u32 id;
+
+ spear_dbi_read_reg(config, PCI_VENDOR_ID, 2, &id);
+
+ return sprintf(buf, "%x", id);
+}
+
+static ssize_t pcie_gadget_store_vendor_id(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ ulong id;
+
+ if (strict_strtoul(buf, 0, &id))
+ return -EINVAL;
+
+ spear_dbi_write_reg(config, PCI_VENDOR_ID, 2, id);
+
+ return count;
+}
+
+static ssize_t pcie_gadget_show_device_id(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ u32 id;
+
+ spear_dbi_read_reg(config, PCI_DEVICE_ID, 2, &id);
+
+ return sprintf(buf, "%x", id);
+}
+
+static ssize_t pcie_gadget_store_device_id(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ ulong id;
+
+ if (strict_strtoul(buf, 0, &id))
+ return -EINVAL;
+
+ spear_dbi_write_reg(config, PCI_DEVICE_ID, 2, id);
+
+ return count;
+}
+
+static ssize_t pcie_gadget_show_bar0_size(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ return sprintf(buf, "%lx", config->bar0_size);
+}
+
+static ssize_t pcie_gadget_store_bar0_size(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ ulong size;
+ u32 pos, pos1;
+ u32 no_of_bit = 0;
+
+ if (strict_strtoul(buf, 0, &size))
+ return -EINVAL;
+ /* min bar size is 256 */
+ if (size <= 0x100)
+ size = 0x100;
+ /* max bar size is 1MB*/
+ else if (size >= 0x100000)
+ size = 0x100000;
+ else {
+ pos = 0;
+ pos1 = 0;
+ while (pos < 21) {
+ pos = find_next_bit((ulong *)&size, 21, pos);
+ if (pos != 21)
+ pos1 = pos + 1;
+ pos++;
+ no_of_bit++;
+ }
+ if (no_of_bit == 2)
+ pos1--;
+
+ size = 1 << pos1;
+ }
+ config->bar0_size = size;
+ spear_dbi_write_reg(config, PCIE_BAR0_MASK_REG, 4, size - 1);
+
+ return count;
+}
+
+static ssize_t pcie_gadget_show_bar0_address(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+
+ u32 address = readl(&app_reg->pim0_mem_addr_start);
+
+ return sprintf(buf, "%x", address);
+}
+
+static ssize_t pcie_gadget_store_bar0_address(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+ ulong address;
+
+ if (strict_strtoul(buf, 0, &address))
+ return -EINVAL;
+
+ address &= ~(config->bar0_size - 1);
+ if (config->va_bar0_address)
+ iounmap(config->va_bar0_address);
+ config->va_bar0_address = ioremap(address, config->bar0_size);
+ if (!config->va_bar0_address)
+ return -ENOMEM;
+
+ writel(address, &app_reg->pim0_mem_addr_start);
+
+ return count;
+}
+
+static ssize_t pcie_gadget_show_bar0_rw_offset(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ return sprintf(buf, "%lx", config->bar0_rw_offset);
+}
+
+static ssize_t pcie_gadget_store_bar0_rw_offset(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ ulong offset;
+
+ if (strict_strtoul(buf, 0, &offset))
+ return -EINVAL;
+
+ if (offset % 4)
+ return -EINVAL;
+
+ config->bar0_rw_offset = offset;
+
+ return count;
+}
+
+static ssize_t pcie_gadget_show_bar0_data(
+ struct spear_pcie_gadget_config *config,
+ char *buf)
+{
+ ulong data;
+
+ if (!config->va_bar0_address)
+ return -ENOMEM;
+
+ data = readl((ulong)config->va_bar0_address + config->bar0_rw_offset);
+
+ return sprintf(buf, "%lx", data);
+}
+
+static ssize_t pcie_gadget_store_bar0_data(
+ struct spear_pcie_gadget_config *config,
+ const char *buf, size_t count)
+{
+ ulong data;
+
+ if (strict_strtoul(buf, 0, &data))
+ return -EINVAL;
+
+ if (!config->va_bar0_address)
+ return -ENOMEM;
+
+ writel(data, (ulong)config->va_bar0_address + config->bar0_rw_offset);
+
+ return count;
+}
+
+/*
+ * Attribute definitions.
+ */
+
+#define PCIE_GADGET_TARGET_ATTR_RO(_name) \
+static struct pcie_gadget_target_attr pcie_gadget_target_##_name = \
+ __CONFIGFS_ATTR(_name, S_IRUGO, pcie_gadget_show_##_name, NULL)
+
+#define PCIE_GADGET_TARGET_ATTR_WO(_name) \
+static struct pcie_gadget_target_attr pcie_gadget_target_##_name = \
+ __CONFIGFS_ATTR(_name, S_IWUSR, NULL, pcie_gadget_store_##_name)
+
+#define PCIE_GADGET_TARGET_ATTR_RW(_name) \
+static struct pcie_gadget_target_attr pcie_gadget_target_##_name = \
+ __CONFIGFS_ATTR(_name, S_IRUGO | S_IWUSR, pcie_gadget_show_##_name, \
+ pcie_gadget_store_##_name)
+PCIE_GADGET_TARGET_ATTR_RW(link);
+PCIE_GADGET_TARGET_ATTR_RW(int_type);
+PCIE_GADGET_TARGET_ATTR_RW(no_of_msi);
+PCIE_GADGET_TARGET_ATTR_WO(inta);
+PCIE_GADGET_TARGET_ATTR_WO(send_msi);
+PCIE_GADGET_TARGET_ATTR_RW(vendor_id);
+PCIE_GADGET_TARGET_ATTR_RW(device_id);
+PCIE_GADGET_TARGET_ATTR_RW(bar0_size);
+PCIE_GADGET_TARGET_ATTR_RW(bar0_address);
+PCIE_GADGET_TARGET_ATTR_RW(bar0_rw_offset);
+PCIE_GADGET_TARGET_ATTR_RW(bar0_data);
+
+static struct configfs_attribute *pcie_gadget_target_attrs[] = {
+ &pcie_gadget_target_link.attr,
+ &pcie_gadget_target_int_type.attr,
+ &pcie_gadget_target_no_of_msi.attr,
+ &pcie_gadget_target_inta.attr,
+ &pcie_gadget_target_send_msi.attr,
+ &pcie_gadget_target_vendor_id.attr,
+ &pcie_gadget_target_device_id.attr,
+ &pcie_gadget_target_bar0_size.attr,
+ &pcie_gadget_target_bar0_address.attr,
+ &pcie_gadget_target_bar0_rw_offset.attr,
+ &pcie_gadget_target_bar0_data.attr,
+ NULL,
+};
+
+static struct pcie_gadget_target *to_target(struct config_item *item)
+{
+ return item ?
+ container_of(to_configfs_subsystem(to_config_group(item)),
+ struct pcie_gadget_target, subsys) : NULL;
+}
+
+/*
+ * Item operations and type for pcie_gadget_target.
+ */
+
+static ssize_t pcie_gadget_target_attr_show(struct config_item *item,
+ struct configfs_attribute *attr,
+ char *buf)
+{
+ ssize_t ret = -EINVAL;
+ struct pcie_gadget_target *target = to_target(item);
+ struct pcie_gadget_target_attr *t_attr =
+ container_of(attr, struct pcie_gadget_target_attr, attr);
+
+ if (t_attr->show)
+ ret = t_attr->show(&target->config, buf);
+ return ret;
+}
+
+static ssize_t pcie_gadget_target_attr_store(struct config_item *item,
+ struct configfs_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ ssize_t ret = -EINVAL;
+ struct pcie_gadget_target *target = to_target(item);
+ struct pcie_gadget_target_attr *t_attr =
+ container_of(attr, struct pcie_gadget_target_attr, attr);
+
+ if (t_attr->store)
+ ret = t_attr->store(&target->config, buf, count);
+ return ret;
+}
+
+static struct configfs_item_operations pcie_gadget_target_item_ops = {
+ .show_attribute = pcie_gadget_target_attr_show,
+ .store_attribute = pcie_gadget_target_attr_store,
+};
+
+static struct config_item_type pcie_gadget_target_type = {
+ .ct_attrs = pcie_gadget_target_attrs,
+ .ct_item_ops = &pcie_gadget_target_item_ops,
+ .ct_owner = THIS_MODULE,
+};
+
+static void spear13xx_pcie_device_init(struct spear_pcie_gadget_config *config)
+{
+ struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+
+ /*setup registers for outbound translation */
+
+ writel(config->base, &app_reg->in0_mem_addr_start);
+ writel(app_reg->in0_mem_addr_start + IN0_MEM_SIZE,
+ &app_reg->in0_mem_addr_limit);
+ writel(app_reg->in0_mem_addr_limit + 1, &app_reg->in1_mem_addr_start);
+ writel(app_reg->in1_mem_addr_start + IN1_MEM_SIZE,
+ &app_reg->in1_mem_addr_limit);
+ writel(app_reg->in1_mem_addr_limit + 1, &app_reg->in_io_addr_start);
+ writel(app_reg->in_io_addr_start + IN_IO_SIZE,
+ &app_reg->in_io_addr_limit);
+ writel(app_reg->in_io_addr_limit + 1, &app_reg->in_cfg0_addr_start);
+ writel(app_reg->in_cfg0_addr_start + IN_CFG0_SIZE,
+ &app_reg->in_cfg0_addr_limit);
+ writel(app_reg->in_cfg0_addr_limit + 1, &app_reg->in_cfg1_addr_start);
+ writel(app_reg->in_cfg1_addr_start + IN_CFG1_SIZE,
+ &app_reg->in_cfg1_addr_limit);
+ writel(app_reg->in_cfg1_addr_limit + 1, &app_reg->in_msg_addr_start);
+ writel(app_reg->in_msg_addr_start + IN_MSG_SIZE,
+ &app_reg->in_msg_addr_limit);
+
+ writel(app_reg->in0_mem_addr_start, &app_reg->pom0_mem_addr_start);
+ writel(app_reg->in1_mem_addr_start, &app_reg->pom1_mem_addr_start);
+ writel(app_reg->in_io_addr_start, &app_reg->pom_io_addr_start);
+
+ /*setup registers for inbound translation */
+
+ /* Keep AORAM mapped at BAR0 as default */
+ config->bar0_size = INBOUND_ADDR_MASK + 1;
+ spear_dbi_write_reg(config, PCIE_BAR0_MASK_REG, 4, INBOUND_ADDR_MASK);
+ spear_dbi_write_reg(config, PCI_BASE_ADDRESS_0, 4, 0xC);
+ config->va_bar0_address = ioremap(SPEAR13XX_SYSRAM1_BASE,
+ config->bar0_size);
+
+ writel(SPEAR13XX_SYSRAM1_BASE, &app_reg->pim0_mem_addr_start);
+ writel(0, &app_reg->pim1_mem_addr_start);
+ writel(INBOUND_ADDR_MASK + 1, &app_reg->mem0_addr_offset_limit);
+
+ writel(0x0, &app_reg->pim_io_addr_start);
+ writel(0x0, &app_reg->pim_io_addr_start);
+ writel(0x0, &app_reg->pim_rom_addr_start);
+
+ writel(DEVICE_TYPE_EP | (1 << MISCTRL_EN_ID)
+ | ((u32)1 << REG_TRANSLATION_ENABLE),
+ &app_reg->app_ctrl_0);
+ /* disable all rx interrupts */
+ writel(0, &app_reg->int_mask);
+
+ /* Select INTA as default*/
+ spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 1);
+}
+
+static int __devinit spear_pcie_gadget_probe(struct platform_device *pdev)
+{
+ struct resource *res0, *res1;
+ unsigned int status = 0;
+ int irq;
+ struct clk *clk;
+ static struct pcie_gadget_target *target;
+ struct spear_pcie_gadget_config *config;
+ struct config_item *cg_item;
+ struct configfs_subsystem *subsys;
+
+ /* get resource for application registers*/
+
+ res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res0) {
+ dev_err(&pdev->dev, "no resource defined\n");
+ return -EBUSY;
+ }
+ if (!request_mem_region(res0->start, resource_size(res0),
+ pdev->name)) {
+ dev_err(&pdev->dev, "pcie gadget region already claimed\n");
+ return -EBUSY;
+ }
+ /* get resource for dbi registers*/
+
+ res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res1) {
+ dev_err(&pdev->dev, "no resource defined\n");
+ goto err_rel_res0;
+ }
+ if (!request_mem_region(res1->start, resource_size(res1),
+ pdev->name)) {
+ dev_err(&pdev->dev, "pcie gadget region already claimed\n");
+ goto err_rel_res0;
+ }
+
+ target = kzalloc(sizeof(*target), GFP_KERNEL);
+ if (!target) {
+ dev_err(&pdev->dev, "out of memory\n");
+ status = -ENOMEM;
+ goto err_rel_res;
+ }
+
+ cg_item = &target->subsys.su_group.cg_item;
+ sprintf(cg_item->ci_namebuf, "pcie_gadget.%d", pdev->id);
+ cg_item->ci_type = &pcie_gadget_target_type;
+ config = &target->config;
+ config->va_app_base = (void __iomem *)ioremap(res0->start,
+ resource_size(res0));
+ if (!config->va_app_base) {
+ dev_err(&pdev->dev, "ioremap fail\n");
+ status = -ENOMEM;
+ goto err_kzalloc;
+ }
+
+ config->base = (void __iomem *)res1->start;
+
+ config->va_dbi_base = (void __iomem *)ioremap(res1->start,
+ resource_size(res1));
+ if (!config->va_dbi_base) {
+ dev_err(&pdev->dev, "ioremap fail\n");
+ status = -ENOMEM;
+ goto err_iounmap_app;
+ }
+
+ dev_set_drvdata(&pdev->dev, target);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "no update irq?\n");
+ status = irq;
+ goto err_iounmap;
+ }
+
+ status = request_irq(irq, spear_pcie_gadget_irq, 0, pdev->name, NULL);
+ if (status) {
+ dev_err(&pdev->dev, "pcie gadget interrupt IRQ%d already \
+ claimed\n", irq);
+ goto err_iounmap;
+ }
+
+ /* Register configfs hooks */
+ subsys = &target->subsys;
+ config_group_init(&subsys->su_group);
+ mutex_init(&subsys->su_mutex);
+ status = configfs_register_subsystem(subsys);
+ if (status)
+ goto err_irq;
+
+ /*
+ * init basic pcie application registers
+ * do not enable clock if it is PCIE0.Ideally , all controller should
+ * have been independent from others with respect to clock. But PCIE1
+ * and 2 depends on PCIE0.So PCIE0 clk is provided during board init.
+ */
+ if (pdev->id == 1) {
+ /*
+ * Ideally CFG Clock should have been also enabled here. But
+ * it is done currently during board init routne
+ */
+ clk = clk_get_sys("pcie1", NULL);
+ if (IS_ERR(clk)) {
+ pr_err("%s:couldn't get clk for pcie1\n", __func__);
+ goto err_irq;
+ }
+ if (clk_enable(clk)) {
+ pr_err("%s:couldn't enable clk for pcie1\n", __func__);
+ goto err_irq;
+ }
+ } else if (pdev->id == 2) {
+ /*
+ * Ideally CFG Clock should have been also enabled here. But
+ * it is done currently during board init routne
+ */
+ clk = clk_get_sys("pcie2", NULL);
+ if (IS_ERR(clk)) {
+ pr_err("%s:couldn't get clk for pcie2\n", __func__);
+ goto err_irq;
+ }
+ if (clk_enable(clk)) {
+ pr_err("%s:couldn't enable clk for pcie2\n", __func__);
+ goto err_irq;
+ }
+ }
+ spear13xx_pcie_device_init(config);
+
+ return 0;
+ free_irq(irq, NULL);
+ iounmap(config->va_dbi_base);
+ iounmap(config->va_app_base);
+ kfree(config);
+ release_mem_region(res1->start, resource_size(res1));
+ release_mem_region(res0->start, resource_size(res0));
+ return status;
+}
+
+static int __devexit spear_pcie_gadget_remove(struct platform_device *pdev)
+{
+ struct resource *res0, *res1;
+ static struct pcie_gadget_target *target;
+ struct spear_pcie_gadget_config *config;
+ int irq;
+
+ res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ irq = platform_get_irq(pdev, 0);
+ target = dev_get_drvdata(&pdev->dev);
+ config = &target->config;
+
+ free_irq(irq, NULL);
+ iounmap(config->va_dbi_base);
+ iounmap(config->va_app_base);
+ release_mem_region(res1->start, resource_size(res1));
+ release_mem_region(res0->start, resource_size(res0));
+ configfs_unregister_subsystem(&target->subsys);
+ kfree(target);
+
+ return 0;
+}
+
+static void spear_pcie_gadget_shutdown(struct platform_device *pdev)
+{
+}
+
+static struct platform_driver spear_pcie_gadget_driver = {
+ .probe = spear_pcie_gadget_probe,
+ .remove = spear_pcie_gadget_remove,
+ .shutdown = spear_pcie_gadget_shutdown,
+ .driver = {
+ .name = "pcie-gadget-spear",
+ .bus = &platform_bus_type
+ },
+};
+
+static int __init spear_pcie_gadget_init(void)
+{
+ return platform_driver_register(&spear_pcie_gadget_driver);
+}
+module_init(spear_pcie_gadget_init);
+
+static void __exit spear_pcie_gadget_exit(void)
+{
+ platform_driver_unregister(&spear_pcie_gadget_driver);
+}
+module_exit(spear_pcie_gadget_exit);
+
+MODULE_ALIAS("pcie-gadget-spear");
+MODULE_AUTHOR("Pratyush Anand");
+MODULE_LICENSE("GPL");
--
1.6.0.2
.
Shahar Lev
2011-06-14 12:16:28 UTC
Permalink
Add Kconfig entries indicating the existence of omap3evm's
wlan/bt wl12xx daughter card (see
http://mistralsolutions.com/component/jumi/Download_Common_Code.html?docid=298),
and the exact reference clock type that the wl12xx device is hardwired
to (the wl12xx driver must know this).

In addition, start using CONFIG_OMAP3EVM_MISTRAL_WL12XX in
the omap3evm's board file instead of CONFIG_WL12XX_PLATFORM_DATA,
because the latter only indicates that the driver is being built, and
shouldn't be used to assume the existence of extension cards.

Signed-off-by: Shahar Lev <***@wizery.com>
---
arch/arm/mach-omap2/Kconfig | 23 +++++++++++++++++++++++
arch/arm/mach-omap2/board-omap3evm.c | 12 ++++++------
2 files changed, 29 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 19d5891..8ef012d 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -342,6 +342,29 @@ config OMAP3_SDRC_AC_TIMING
wish to say no. Selecting yes without understanding what is
going on could result in system crashes;

+config OMAP3EVM_MISTRAL_WL12XX
+ bool "Enable Mistral WL12XX daughter board support"
+ depends on MACH_OMAP3EVM
+ help
+ Support for the Mistral WL12XX daughter board.
+ This extension board which supports both WLAN and Bluetooth.
+ Specifically, for WL1271, more info can be found at
+ http://mistralsolutions.com/component/jumi/Download_Common_Code.html?docid=298
+
+config OMAP3EVM_MISTRAL_WL12XX_REFCLOCK
+ int "Ref clock value"
+ range 0 5
+ depends on OMAP3EVM_MISTRAL_WL12XX
+ default 2
+ help
+ Set ref clock value for the Mistral WL12XX daughter board.
+ Select 0 for 19.2 MHz.
+ Select 1 for 26 MHz.
+ Select 2 for 38.4 MHz.
+ Select 3 for 52 MHz.
+ Select 4 for 38.4 MHz, XTAL.
+ Select 5 for 26 MHz, XTAL.
+
endmenu

endif
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index b4d4346..23f12ff 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -318,7 +318,7 @@ static struct omap2_hsmmc_info mmc[] = {
.gpio_cd = -EINVAL,
.gpio_wp = 63,
},
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
+#ifdef CONFIG_OMAP3EVM_MISTRAL_WL12XX
{
.name = "wl1271",
.mmc = 2,
@@ -506,7 +506,7 @@ static struct regulator_init_data omap3evm_vio = {
.consumer_supplies = &omap3evm_vio_supply,
};

-#ifdef CONFIG_WL12XX_PLATFORM_DATA
+#ifdef CONFIG_OMAP3EVM_MISTRAL_WL12XX

#define OMAP3EVM_WLAN_PMENA_GPIO (150)
#define OMAP3EVM_WLAN_IRQ_GPIO (149)
@@ -543,7 +543,7 @@ static struct platform_device omap3evm_wlan_regulator = {

struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
.irq = OMAP_GPIO_IRQ(OMAP3EVM_WLAN_IRQ_GPIO),
- .board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
+ .board_ref_clock = CONFIG_OMAP3EVM_MISTRAL_WL12XX_REFCLOCK,
};
#endif

@@ -606,7 +606,7 @@ static struct omap_board_mux omap35x_board_mux[] __initdata = {
OMAP_PIN_OFF_NONE),
OMAP3_MUX(GPMC_WAIT2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
OMAP_PIN_OFF_NONE),
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
+#ifdef CONFIG_OMAP3EVM_MISTRAL_WL12XX
/* WLAN IRQ - GPIO 149 */
OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),

@@ -644,7 +644,7 @@ static struct omap_board_mux omap36x_board_mux[] __initdata = {
OMAP3_MUX(SYS_BOOT4, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
OMAP3_MUX(SYS_BOOT6, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
+#ifdef CONFIG_OMAP3EVM_MISTRAL_WL12XX
/* WLAN IRQ - GPIO 149 */
OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),

@@ -726,7 +726,7 @@ static void __init omap3_evm_init(void)
omap3evm_init_smsc911x();
omap3_evm_display_init();

-#ifdef CONFIG_WL12XX_PLATFORM_DATA
+#ifdef CONFIG_OMAP3EVM_MISTRAL_WL12XX
/* WL12xx WLAN Init */
if (wl12xx_set_platform_data(&omap3evm_wlan_data))
pr_err("error setting wl12xx data\n");
--
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Tony Lindgren
2011-06-14 12:34:00 UTC
Permalink
Post by Shahar Lev
+config OMAP3EVM_MISTRAL_WL12XX
+ bool "Enable Mistral WL12XX daughter board support"
+ depends on MACH_OMAP3EVM
+ help
+ Support for the Mistral WL12XX daughter board.
+ This extension board which supports both WLAN and Bluetooth.
+ Specifically, for WL1271, more info can be found at
+ http://mistralsolutions.com/component/jumi/Download_Common_Code.html?docid=298
+
+config OMAP3EVM_MISTRAL_WL12XX_REFCLOCK
+ int "Ref clock value"
+ range 0 5
+ depends on OMAP3EVM_MISTRAL_WL12XX
+ default 2
+ help
+ Set ref clock value for the Mistral WL12XX daughter board.
+ Select 0 for 19.2 MHz.
+ Select 1 for 26 MHz.
+ Select 2 for 38.4 MHz.
+ Select 3 for 52 MHz.
+ Select 4 for 38.4 MHz, XTAL.
+ Select 5 for 26 MHz, XTAL.
+
This your should try to remove as it won't work nicely for supporting
various boards with the same kernel as we already do with
omap2plus_defconfig.

Can you somehow detect the daughter board dynamically and then
set the flags?

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Shahar Lev
2011-06-14 13:26:06 UTC
Permalink
Post by Tony Lindgren
This your should try to remove as it won't work nicely for supporting
various boards with the same kernel as we already do with
omap2plus_defconfig.
Can you somehow detect the daughter board dynamically and then
set the flags?
We thought about multi-board kernels, but unfortunately have no
better solution, since there is no dynamic way to probe these cards.
Even worse, these cards sometimes come with different clocks in them,
hence the 2nd OMAP3EVM_MISTRAL_WL12XX_REFCLOCK entry we had to
introduce...

Maybe we should add two bootargs with which the user can override this
Kconfig configuration? This should allow using the same kernel binary
with different omap3evm boards.

It's a bit cumbersome though..
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Tony Lindgren
2011-06-14 13:55:19 UTC
Permalink
Post by Shahar Lev
Post by Tony Lindgren
This your should try to remove as it won't work nicely for supporting
various boards with the same kernel as we already do with
omap2plus_defconfig.
Can you somehow detect the daughter board dynamically and then
set the flags?
We thought about multi-board kernels, but unfortunately have no
better solution, since there is no dynamic way to probe these cards.
Even worse, these cards sometimes come with different clocks in them,
hence the 2nd OMAP3EVM_MISTRAL_WL12XX_REFCLOCK entry we had to
introduce...
Maybe we should add two bootargs with which the user can override this
Kconfig configuration? This should allow using the same kernel binary
with different omap3evm boards.
It's a bit cumbersome though..
Yes cmdline should do the trick until we have devicetree data
available..

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Vitaly Wool
2011-06-16 12:20:27 UTC
Permalink
Hi Shahar, Tony,
Post by Shahar Lev
Post by Tony Lindgren
This your should try to remove as it won't work nicely for supporting
various boards with the same kernel as we already do with
omap2plus_defconfig.
Can you somehow detect the daughter board dynamically and then
set the flags?
We thought about multi-board kernels, but unfortunately have no
better solution, since there is no dynamic way to probe these cards.
Even worse, these cards sometimes come with different clocks in them,
hence the 2nd OMAP3EVM_MISTRAL_WL12XX_REFCLOCK entry we had to
introduce...
Maybe we should add two bootargs with which the user can override this
Kconfig configuration? This should allow using the same kernel binary
with different omap3evm boards.
You won't need Kconfig parameters then. Just have module parameters
and supply whatever default values you find reasonable.

~Vitaly
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Premi, Sanjeev
2011-06-16 09:53:08 UTC
Permalink
-----Original Message-----
Sent: Tuesday, June 14, 2011 5:46 PM
Cc: linux-arm; Tony Lindgren; Shahar Lev
Subject: [PATCH] omap3evm: Add Mistral WL12XX config support
Add Kconfig entries indicating the existence of omap3evm's
wlan/bt wl12xx daughter card (see
http://mistralsolutions.com/component/jumi/Download_Common_Cod
e.html?docid=298),
and the exact reference clock type that the wl12xx device is hardwired
to (the wl12xx driver must know this).
In addition, start using CONFIG_OMAP3EVM_MISTRAL_WL12XX in
the omap3evm's board file instead of CONFIG_WL12XX_PLATFORM_DATA,
because the latter only indicates that the driver is being built, and
shouldn't be used to assume the existence of extension cards.
---
arch/arm/mach-omap2/Kconfig | 23 +++++++++++++++++++++++
arch/arm/mach-omap2/board-omap3evm.c | 12 ++++++------
2 files changed, 29 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 19d5891..8ef012d 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -342,6 +342,29 @@ config OMAP3_SDRC_AC_TIMING
wish to say no. Selecting yes without understanding what is
going on could result in system crashes;
+config OMAP3EVM_MISTRAL_WL12XX
[sp] Could this be renamed simply as: OMAP3EVM_WL12XX?
OR is there a specific reason to add vendor/manufacturers' name
to the defintion?

~sanjeev

[snip]...[snip]
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Shahar Lev
2011-06-16 18:37:22 UTC
Permalink
Post by Premi, Sanjeev
[sp] Could this be renamed simply as: OMAP3EVM_WL12XX?
=A0 =A0 OR is there a specific reason to add vendor/manufacturers' na=
me
Post by Premi, Sanjeev
=A0 =A0 to the defintion?
I don't mind changing it.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" i=
n
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Sundaram Raju
2011-07-10 15:03:23 UTC
Permalink
Added new dma_ctrl_cmd TI_DMA_STRIDE_CONFIG to pass the TI DMA
controller specific configurations on how a buffer must be walked
through and how data is picked for transfer based on a specified
pattern over the channel.

The configuration passed is specific to the TI DMA controller used.

Signed-off-by: Sundaram Raju <sundaram-***@public.gmane.org>
---
include/linux/dmaengine.h | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index eee7add..51dadc4 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -123,6 +123,10 @@ enum dma_ctrl_flags {
* command.
* @FSLDMA_EXTERNAL_START: this command will put the Freescale DMA controller
* into external start mode.
+ * @TI_DMA_STRIDE_CONFIG: this command is only implemented by TI DMA
+ * controllers that need to pass special configuration on how to walk through
+ * the buffer to pick up data in a specified pattern to be transferred in
+ * the channel.
*/
enum dma_ctrl_cmd {
DMA_TERMINATE_ALL,
@@ -130,6 +134,7 @@ enum dma_ctrl_cmd {
DMA_RESUME,
DMA_SLAVE_CONFIG,
FSLDMA_EXTERNAL_START,
+ TI_DMA_STRIDE_CONFIG,
};

/**
--
1.6.2.4
Loading...