Discussion:
[PATCH] arm64: dts: marvell: Fully re-order nodes in Marvell CP110 dtsi files
Gregory CLEMENT
2017-07-18 14:42:24 UTC
Permalink
Since the introduction of the CP110 dt files, the sata node was
misplaced. Move it at the right place. Thanks to this, the files are
completely ordered.

Signed-off-by: Gregory CLEMENT <***@free-electrons.com>
---
arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 18 +++++++++---------
arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 18 +++++++++---------
2 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index 394e54d37fff..1acd6a92d1a7 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
@@ -162,15 +162,6 @@
};
};

- cpm_sata0: ***@540000 {
- compatible = "marvell,armada-8k-ahci",
- "generic-ahci";
- reg = <0x540000 0x30000>;
- interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpm_clk 1 15>;
- status = "disabled";
- };
-
cpm_usb3_0: ***@500000 {
compatible = "marvell,armada-8k-xhci",
"generic-xhci";
@@ -191,6 +182,15 @@
status = "disabled";
};

+ cpm_sata0: ***@540000 {
+ compatible = "marvell,armada-8k-ahci",
+ "generic-ahci";
+ reg = <0x540000 0x30000>;
+ interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpm_clk 1 15>;
+ status = "disabled";
+ };
+
cpm_xor0: ***@6a0000 {
compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
reg = <0x6a0000 0x1000>,
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index 2e6422a66d76..a21814855799 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
@@ -163,15 +163,6 @@

};

- cps_sata0: ***@540000 {
- compatible = "marvell,armada-8k-ahci",
- "generic-ahci";
- reg = <0x540000 0x30000>;
- interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cps_clk 1 15>;
- status = "disabled";
- };
-
cps_usb3_0: ***@500000 {
compatible = "marvell,armada-8k-xhci",
"generic-xhci";
@@ -192,6 +183,15 @@
status = "disabled";
};

+ cps_sata0: ***@540000 {
+ compatible = "marvell,armada-8k-ahci",
+ "generic-ahci";
+ reg = <0x540000 0x30000>;
+ interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cps_clk 1 15>;
+ status = "disabled";
+ };
+
cps_xor0: ***@6a0000 {
compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
reg = <0x6a0000 0x1000>,
--
2.13.2
Loading...