[PATCH 0/3] Keystone defconfig updates

[Suman Anna]

Hi Santosh,

The following patch series adds the necessary defconfig options to
keystone_defconfig to enable the TI-SCI protocol and their respective
genpd/clock/reset drivers.

This is the first of two series that provides a baseline for adding
and/or enabling other peripherals on the 66AK2G platforms. Patches are
baselined on 4.13-rc1 and are intended for the 4.14 merge window.

regards
Suman

Nishanth Menon (2):
ARM: configs: keystone: Enable Message Manager
ARM: configs: keystone: Enable TI-SCI protocol and genpd driver

Suman Anna (1):
ARM: configs: keystone: Enable reset drivers

arch/arm/configs/keystone_defconfig | 6 ++++++
1 file changed, 6 insertions(+)

[Suman Anna]

Enable the TI SYSCON and TI-SCI reset drivers for Keystone
platforms. These drivers will provide the reset functionality
for devices like DSPs or PRU-ICSSs. There are no devices that
require these to be built-in, so these are enabled as modules.

Signed-off-by: Suman Anna <s-***@ti.com>
---
arch/arm/configs/keystone_defconfig | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig
index 40bc47171193..d47ea43d097e 100644
--- a/arch/arm/configs/keystone_defconfig
+++ b/arch/arm/configs/keystone_defconfig
@@ -183,6 +183,8 @@ CONFIG_TI_SCI_PM_DOMAINS=y
CONFIG_MEMORY=y
CONFIG_TI_AEMIF=y
CONFIG_KEYSTONE_IRQ=y
+CONFIG_RESET_TI_SCI=m
+CONFIG_RESET_TI_SYSCON=m
CONFIG_TI_SCI_PROTOCOL=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y

[Suman Anna]

From: Nishanth Menon <***@ti.com>

Enable the TI-SCI core protocol and the corresponding genpd
driver to enable the essential infrastructure for various
device drivers on the 66AK2G family of SoCs. The TI-SCI Clock
driver is automatically enabled for ARCH_KEYSTONE.

Signed-off-by: Nishanth Menon <***@ti.com>
Signed-off-by: Suman Anna <s-***@ti.com>
---
arch/arm/configs/keystone_defconfig | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig
index 1a56a4000a14..40bc47171193 100644
--- a/arch/arm/configs/keystone_defconfig
+++ b/arch/arm/configs/keystone_defconfig
@@ -179,9 +179,11 @@ CONFIG_TI_MESSAGE_MANAGER=y
CONFIG_SOC_TI=y
CONFIG_KEYSTONE_NAVIGATOR_QMSS=y
CONFIG_KEYSTONE_NAVIGATOR_DMA=y
+CONFIG_TI_SCI_PM_DOMAINS=y
CONFIG_MEMORY=y
CONFIG_TI_AEMIF=y
CONFIG_KEYSTONE_IRQ=y
+CONFIG_TI_SCI_PROTOCOL=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_FANOTIFY=y

[Suman Anna]

From: Nishanth Menon <***@ti.com>

Message Manager is a communication hardware block on 66AK2G[1] SoCs.
Enable the same to provide support for communication with 66AK2G Power
Management Micro Controller (PMMC) via the TISCI protocol[2].

[1] http://www.ti.com/product/66ak2g02
[2] http://processors.wiki.ti.com/index.php/TISCI

Signed-off-by: Nishanth Menon <***@ti.com>
Signed-off-by: Suman Anna <s-***@ti.com>
---
arch/arm/configs/keystone_defconfig | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig
index 1331f6dc456a..1a56a4000a14 100644
--- a/arch/arm/configs/keystone_defconfig
+++ b/arch/arm/configs/keystone_defconfig
@@ -174,6 +174,8 @@ CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_DMADEVICES=y
CONFIG_TI_EDMA=y
+CONFIG_MAILBOX=y
+CONFIG_TI_MESSAGE_MANAGER=y
CONFIG_SOC_TI=y
CONFIG_KEYSTONE_NAVIGATOR_QMSS=y
CONFIG_KEYSTONE_NAVIGATOR_DMA=y

[s***@oracle.com]

Post by Suman Anna
Hi Santosh,
The following patch series adds the necessary defconfig options to
keystone_defconfig to enable the TI-SCI protocol and their respective
genpd/clock/reset drivers.
This is the first of two series that provides a baseline for adding
and/or enabling other peripherals on the 66AK2G platforms. Patches are
baselined on 4.13-rc1 and are intended for the 4.14 merge window.

Looks good. Will add this to 4.14 queue and push it to next by
weekend.

Regards,
Santosh

[Santosh Shilimkar]

Post by s***@oracle.com

Post by Suman Anna
Hi Santosh,
The following patch series adds the necessary defconfig options to
keystone_defconfig to enable the TI-SCI protocol and their respective
genpd/clock/reset drivers.
This is the first of two series that provides a baseline for adding
and/or enabling other peripherals on the 66AK2G platforms. Patches are
baselined on 4.13-rc1 and are intended for the 4.14 merge window.

Looks good. Will add this to 4.14 queue and push it to next by
weekend.

The changes should start showing up in linux next. Do let me know if I
have missed any patches.

Regards,
Santosh