Discussion:
[PATCH 3/3] ARM: dts: at91: sama5d2: use sama5d2 compatible string for SMC
Ludovic Desroches
2017-07-11 07:40:15 UTC
Permalink
A new compatible string has been introduced for sama5d2 SMC to allow to
manage the registers mapping change.

Signed-off-by: Ludovic Desroches <***@microchip.com>
---
arch/arm/boot/dts/sama5d2.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 4fcd5bb219e3..60e69aeacbdb 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -1048,7 +1048,7 @@
};

hsmc: ***@f8014000 {
- compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
+ compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
reg = <0xf8014000 0x1000>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
clocks = <&hsmc_clk>;
--
2.12.2
Ludovic Desroches
2017-07-11 07:40:13 UTC
Permalink
A new compatible string is introduced for SMC on sama5d2 to manage a
different layout of the registers.

Signed-off-by: Ludovic Desroches <***@microchip.com>
---
Documentation/devicetree/bindings/mfd/atmel-smc.txt | 1 +
1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/mfd/atmel-smc.txt b/Documentation/devicetree/bindings/mfd/atmel-smc.txt
index 26eeed373934..1103ce2030fb 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-smc.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-smc.txt
@@ -8,6 +8,7 @@ Required properties:
- compatible: Should be one of the following
"atmel,at91sam9260-smc", "syscon"
"atmel,sama5d3-smc", "syscon"
+ "atmel,sama5d2-smc", "syscon"
- reg: Contains offset/length value of the SMC memory
region.
--
2.12.2
Rob Herring
2017-07-14 16:06:03 UTC
Permalink
Post by Ludovic Desroches
A new compatible string is introduced for SMC on sama5d2 to manage a
different layout of the registers.
---
Documentation/devicetree/bindings/mfd/atmel-smc.txt | 1 +
1 file changed, 1 insertion(+)
Acked-by: Rob Herring <***@kernel.org>
Lee Jones
2017-07-18 08:10:09 UTC
Permalink
Post by Ludovic Desroches
A new compatible string is introduced for SMC on sama5d2 to manage a
different layout of the registers.
---
Documentation/devicetree/bindings/mfd/atmel-smc.txt | 1 +
1 file changed, 1 insertion(+)
Applied, thanks.
Post by Ludovic Desroches
diff --git a/Documentation/devicetree/bindings/mfd/atmel-smc.txt b/Documentation/devicetree/bindings/mfd/atmel-smc.txt
index 26eeed373934..1103ce2030fb 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-smc.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-smc.txt
- compatible: Should be one of the following
"atmel,at91sam9260-smc", "syscon"
"atmel,sama5d3-smc", "syscon"
+ "atmel,sama5d2-smc", "syscon"
- reg: Contains offset/length value of the SMC memory
region.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Ludovic Desroches
2017-07-11 07:40:14 UTC
Permalink
For HSMC controller, the register layout depends on the device i.e. the
offset of setup, pulse, cycle, mode and timings registers is not the
same. An helper is added to provide the correct register layout.

Fixes: fe9d7cb22ef3 ("mfd: syscon: atmel-smc: Add new helpers to ease
SMC regs manipulation")
Suggested-by: Boris Brezillon <***@free-electrons.com>
Signed-off-by: Ludovic Desroches <***@microchip.com>
---
drivers/memory/atmel-ebi.c | 13 +++++--
drivers/mfd/atmel-smc.c | 67 +++++++++++++++++++++++++-------
drivers/mtd/nand/atmel/nand-controller.c | 10 +++--
include/linux/mfd/syscon/atmel-smc.h | 32 ++++++++++-----
4 files changed, 92 insertions(+), 30 deletions(-)

diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c
index 99e644cda4d1..63c9e7a76854 100644
--- a/drivers/memory/atmel-ebi.c
+++ b/drivers/memory/atmel-ebi.c
@@ -51,6 +51,7 @@ struct atmel_ebi {
struct {
struct regmap *regmap;
struct clk *clk;
+ const struct atmel_hsmc_reg_layout *layout;
} smc;

struct device *dev;
@@ -84,8 +85,8 @@ static void at91sam9_ebi_get_config(struct atmel_ebi_dev *ebid,
static void sama5_ebi_get_config(struct atmel_ebi_dev *ebid,
struct atmel_ebi_dev_config *conf)
{
- atmel_hsmc_cs_conf_get(ebid->ebi->smc.regmap, conf->cs,
- &conf->smcconf);
+ atmel_hsmc_cs_conf_get(ebid->ebi->smc.regmap, ebid->ebi->smc.layout,
+ conf->cs, &conf->smcconf);
}

static const struct atmel_smc_timing_xlate timings_xlate_table[] = {
@@ -285,8 +286,8 @@ static void at91sam9_ebi_apply_config(struct atmel_ebi_dev *ebid,
static void sama5_ebi_apply_config(struct atmel_ebi_dev *ebid,
struct atmel_ebi_dev_config *conf)
{
- atmel_hsmc_cs_conf_apply(ebid->ebi->smc.regmap, conf->cs,
- &conf->smcconf);
+ atmel_hsmc_cs_conf_apply(ebid->ebi->smc.regmap, ebid->ebi->smc.layout,
+ conf->cs, &conf->smcconf);
}

static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np,
@@ -525,6 +526,10 @@ static int atmel_ebi_probe(struct platform_device *pdev)
if (IS_ERR(ebi->smc.regmap))
return PTR_ERR(ebi->smc.regmap);

+ ebi->smc.layout = atmel_hsmc_get_reg_layout(smc_np);
+ if (IS_ERR(ebi->smc.layout))
+ return PTR_ERR(ebi->smc.layout);
+
ebi->smc.clk = of_clk_get(smc_np, 0);
if (IS_ERR(ebi->smc.clk)) {
if (PTR_ERR(ebi->smc.clk) != -ENOENT)
diff --git a/drivers/mfd/atmel-smc.c b/drivers/mfd/atmel-smc.c
index 954cf0f66a31..1ad44e63b511 100644
--- a/drivers/mfd/atmel-smc.c
+++ b/drivers/mfd/atmel-smc.c
@@ -258,19 +258,21 @@ EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_apply);
* atmel_hsmc_cs_conf_apply - apply an SMC CS conf
* @regmap: the HSMC regmap
* @cs: the CS id
+ * @layout: the layout of registers
* @conf the SMC CS conf to apply
*
* Applies an SMC CS configuration.
* Only valid on post-sama5 SoCs.
*/
-void atmel_hsmc_cs_conf_apply(struct regmap *regmap, int cs,
- const struct atmel_smc_cs_conf *conf)
+void atmel_hsmc_cs_conf_apply(struct regmap *regmap,
+ const struct atmel_hsmc_reg_layout *layout,
+ int cs, const struct atmel_smc_cs_conf *conf)
{
- regmap_write(regmap, ATMEL_HSMC_SETUP(cs), conf->setup);
- regmap_write(regmap, ATMEL_HSMC_PULSE(cs), conf->pulse);
- regmap_write(regmap, ATMEL_HSMC_CYCLE(cs), conf->cycle);
- regmap_write(regmap, ATMEL_HSMC_TIMINGS(cs), conf->timings);
- regmap_write(regmap, ATMEL_HSMC_MODE(cs), conf->mode);
+ regmap_write(regmap, ATMEL_HSMC_SETUP(layout, cs), conf->setup);
+ regmap_write(regmap, ATMEL_HSMC_PULSE(layout, cs), conf->pulse);
+ regmap_write(regmap, ATMEL_HSMC_CYCLE(layout, cs), conf->cycle);
+ regmap_write(regmap, ATMEL_HSMC_TIMINGS(layout, cs), conf->timings);
+ regmap_write(regmap, ATMEL_HSMC_MODE(layout, cs), conf->mode);
}
EXPORT_SYMBOL_GPL(atmel_hsmc_cs_conf_apply);

@@ -297,18 +299,55 @@ EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_get);
* atmel_hsmc_cs_conf_get - retrieve the current SMC CS conf
* @regmap: the HSMC regmap
* @cs: the CS id
+ * @layout: the layout of registers
* @conf: the SMC CS conf object to store the current conf
*
* Retrieve the SMC CS configuration.
* Only valid on post-sama5 SoCs.
*/
-void atmel_hsmc_cs_conf_get(struct regmap *regmap, int cs,
- struct atmel_smc_cs_conf *conf)
+void atmel_hsmc_cs_conf_get(struct regmap *regmap,
+ const struct atmel_hsmc_reg_layout *layout,
+ int cs, struct atmel_smc_cs_conf *conf)
{
- regmap_read(regmap, ATMEL_HSMC_SETUP(cs), &conf->setup);
- regmap_read(regmap, ATMEL_HSMC_PULSE(cs), &conf->pulse);
- regmap_read(regmap, ATMEL_HSMC_CYCLE(cs), &conf->cycle);
- regmap_read(regmap, ATMEL_HSMC_TIMINGS(cs), &conf->timings);
- regmap_read(regmap, ATMEL_HSMC_MODE(cs), &conf->mode);
+ regmap_read(regmap, ATMEL_HSMC_SETUP(layout, cs), &conf->setup);
+ regmap_read(regmap, ATMEL_HSMC_PULSE(layout, cs), &conf->pulse);
+ regmap_read(regmap, ATMEL_HSMC_CYCLE(layout, cs), &conf->cycle);
+ regmap_read(regmap, ATMEL_HSMC_TIMINGS(layout, cs), &conf->timings);
+ regmap_read(regmap, ATMEL_HSMC_MODE(layout, cs), &conf->mode);
}
EXPORT_SYMBOL_GPL(atmel_hsmc_cs_conf_get);
+
+static const struct atmel_hsmc_reg_layout sama5d3_reg_layout = {
+ .timing_regs_offset = 0x600,
+};
+
+static const struct atmel_hsmc_reg_layout sama5d2_reg_layout = {
+ .timing_regs_offset = 0x700,
+};
+
+static const struct of_device_id atmel_smc_ids[] = {
+ { .compatible = "atmel,at91sam9260-smc", .data = NULL },
+ { .compatible = "atmel,sama5d3-smc", .data = &sama5d3_reg_layout },
+ { .compatible = "atmel,sama5d2-smc", .data = &sama5d2_reg_layout },
+ { /* sentinel */ },
+};
+
+/**
+ * atmel_hsmc_get_reg_layout - retrieve the layout of HSMC registers
+ * @np: the HSMC regmap
+ *
+ * Retrieve the layout of HSMC registers.
+ *
+ * Returns NULL in case of SMC, a struct atmel_hsmc_reg_layout pointer
+ * in HSMC case, otherwise ERR_PTR(-EINVAL).
+ */
+const struct atmel_hsmc_reg_layout *
+atmel_hsmc_get_reg_layout(struct device_node *np)
+{
+ const struct of_device_id *match;
+
+ match = of_match_node(atmel_hsmc_ids, np);
+
+ return match ? match->data : ERR_PTR(-EINVAL);
+}
+EXPORT_SYMBOL_GPL(atmel_hsmc_get_reg_layout);
diff --git a/drivers/mtd/nand/atmel/nand-controller.c b/drivers/mtd/nand/atmel/nand-controller.c
index d922a88e407f..29396e618965 100644
--- a/drivers/mtd/nand/atmel/nand-controller.c
+++ b/drivers/mtd/nand/atmel/nand-controller.c
@@ -247,6 +247,7 @@ struct atmel_hsmc_nand_controller {
void __iomem *virt;
dma_addr_t dma;
} sram;
+ const struct atmel_hsmc_reg_layout *hsmc_layout;
struct regmap *io;
struct atmel_nfc_op op;
struct completion complete;
@@ -1431,12 +1432,12 @@ static int atmel_hsmc_nand_setup_data_interface(struct atmel_nand *nand,
int csline,
const struct nand_data_interface *conf)
{
- struct atmel_nand_controller *nc;
+ struct atmel_hsmc_nand_controller *nc;
struct atmel_smc_cs_conf smcconf;
struct atmel_nand_cs *cs;
int ret;

- nc = to_nand_controller(nand->base.controller);
+ nc = to_hsmc_nand_controller(nand->base.controller);

ret = atmel_smc_nand_prepare_smcconf(nand, conf, &smcconf);
if (ret)
@@ -1451,7 +1452,8 @@ static int atmel_hsmc_nand_setup_data_interface(struct atmel_nand *nand,
if (cs->rb.type == ATMEL_NAND_NATIVE_RB)
cs->smcconf.timings |= ATMEL_HSMC_TIMINGS_RBNSEL(cs->rb.id);

- atmel_hsmc_cs_conf_apply(nc->smc, cs->id, &cs->smcconf);
+ atmel_hsmc_cs_conf_apply(nc->base.smc, nc->hsmc_layout, cs->id,
+ &cs->smcconf);

return 0;
}
@@ -2166,6 +2168,8 @@ atmel_hsmc_nand_controller_init(struct atmel_hsmc_nand_controller *nc)
return -EINVAL;
}

+ nc->hsmc_layout = atmel_hsmc_get_reg_layout(np);
+
nc->irq = of_irq_get(np, 0);
of_node_put(np);
if (nc->irq < 0) {
diff --git a/include/linux/mfd/syscon/atmel-smc.h b/include/linux/mfd/syscon/atmel-smc.h
index afa266169800..7a367f34b66a 100644
--- a/include/linux/mfd/syscon/atmel-smc.h
+++ b/include/linux/mfd/syscon/atmel-smc.h
@@ -15,21 +15,26 @@
#define _LINUX_MFD_SYSCON_ATMEL_SMC_H_

#include <linux/kernel.h>
+#include <linux/of.h>
#include <linux/regmap.h>

#define ATMEL_SMC_SETUP(cs) (((cs) * 0x10))
-#define ATMEL_HSMC_SETUP(cs) (0x600 + ((cs) * 0x14))
+#define ATMEL_HSMC_SETUP(layout, cs) \
+ ((layout)->timing_regs_offset + ((cs) * 0x14))
#define ATMEL_SMC_PULSE(cs) (((cs) * 0x10) + 0x4)
-#define ATMEL_HSMC_PULSE(cs) (0x600 + ((cs) * 0x14) + 0x4)
+#define ATMEL_HSMC_PULSE(layout, cs) \
+ ((layout)->timing_regs_offset + ((cs) * 0x14) + 0x4)
#define ATMEL_SMC_CYCLE(cs) (((cs) * 0x10) + 0x8)
-#define ATMEL_HSMC_CYCLE(cs) (0x600 + ((cs) * 0x14) + 0x8)
+#define ATMEL_HSMC_CYCLE(layout, cs) \
+ ((layout)->timing_regs_offset + ((cs) * 0x14) + 0x8)
#define ATMEL_SMC_NWE_SHIFT 0
#define ATMEL_SMC_NCS_WR_SHIFT 8
#define ATMEL_SMC_NRD_SHIFT 16
#define ATMEL_SMC_NCS_RD_SHIFT 24

#define ATMEL_SMC_MODE(cs) (((cs) * 0x10) + 0xc)
-#define ATMEL_HSMC_MODE(cs) (0x600 + ((cs) * 0x14) + 0x10)
+#define ATMEL_HSMC_MODE(layout, cs) \
+ ((layout)->timing_regs_offset + ((cs) * 0x14) + 0x10)
#define ATMEL_SMC_MODE_READMODE_MASK BIT(0)
#define ATMEL_SMC_MODE_READMODE_NCS (0 << 0)
#define ATMEL_SMC_MODE_READMODE_NRD (1 << 0)
@@ -59,7 +64,8 @@
#define ATMEL_SMC_MODE_PS_16 (2 << 28)
#define ATMEL_SMC_MODE_PS_32 (3 << 28)

-#define ATMEL_HSMC_TIMINGS(cs) (0x600 + ((cs) * 0x14) + 0xc)
+#define ATMEL_HSMC_TIMINGS(layout, cs) \
+ ((layout)->timing_regs_offset + ((cs) * 0x14) + 0xc)
#define ATMEL_HSMC_TIMINGS_OCMS BIT(12)
#define ATMEL_HSMC_TIMINGS_RBNSEL(x) ((x) << 28)
#define ATMEL_HSMC_TIMINGS_NFSEL BIT(31)
@@ -69,6 +75,10 @@
#define ATMEL_HSMC_TIMINGS_TRR_SHIFT 16
#define ATMEL_HSMC_TIMINGS_TWB_SHIFT 24

+struct atmel_hsmc_reg_layout {
+ unsigned int timing_regs_offset;
+};
+
/**
* struct atmel_smc_cs_conf - SMC CS config as described in the datasheet.
* @setup: NCS/NWE/NRD setup timings (not applicable to at91rm9200)
@@ -98,11 +108,15 @@ int atmel_smc_cs_conf_set_cycle(struct atmel_smc_cs_conf *conf,
unsigned int shift, unsigned int ncycles);
void atmel_smc_cs_conf_apply(struct regmap *regmap, int cs,
const struct atmel_smc_cs_conf *conf);
-void atmel_hsmc_cs_conf_apply(struct regmap *regmap, int cs,
- const struct atmel_smc_cs_conf *conf);
+void atmel_hsmc_cs_conf_apply(struct regmap *regmap,
+ const struct atmel_hsmc_reg_layout *reglayout,
+ int cs, const struct atmel_smc_cs_conf *conf);
void atmel_smc_cs_conf_get(struct regmap *regmap, int cs,
struct atmel_smc_cs_conf *conf);
-void atmel_hsmc_cs_conf_get(struct regmap *regmap, int cs,
- struct atmel_smc_cs_conf *conf);
+void atmel_hsmc_cs_conf_get(struct regmap *regmap,
+ const struct atmel_hsmc_reg_layout *reglayout,
+ int cs, struct atmel_smc_cs_conf *conf);
+const struct atmel_hsmc_reg_layout *
+atmel_hsmc_get_reg_layout(struct device_node *np);

#endif /* _LINUX_MFD_SYSCON_ATMEL_SMC_H_ */
--
2.12.2
Boris Brezillon
2017-07-11 08:07:31 UTC
Permalink
On Tue, 11 Jul 2017 09:40:14 +0200
Post by Ludovic Desroches
For HSMC controller, the register layout depends on the device i.e. the
offset of setup, pulse, cycle, mode and timings registers is not the
same. An helper is added to provide the correct register layout.
Fixes: fe9d7cb22ef3 ("mfd: syscon: atmel-smc: Add new helpers to ease
SMC regs manipulation")
---
drivers/memory/atmel-ebi.c | 13 +++++--
drivers/mfd/atmel-smc.c | 67 +++++++++++++++++++++++++-------
drivers/mtd/nand/atmel/nand-controller.c | 10 +++--
include/linux/mfd/syscon/atmel-smc.h | 32 ++++++++++-----
4 files changed, 92 insertions(+), 30 deletions(-)
diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c
index 99e644cda4d1..63c9e7a76854 100644
--- a/drivers/memory/atmel-ebi.c
+++ b/drivers/memory/atmel-ebi.c
@@ -51,6 +51,7 @@ struct atmel_ebi {
struct {
struct regmap *regmap;
struct clk *clk;
+ const struct atmel_hsmc_reg_layout *layout;
} smc;
struct device *dev;
@@ -84,8 +85,8 @@ static void at91sam9_ebi_get_config(struct atmel_ebi_dev *ebid,
static void sama5_ebi_get_config(struct atmel_ebi_dev *ebid,
struct atmel_ebi_dev_config *conf)
{
- atmel_hsmc_cs_conf_get(ebid->ebi->smc.regmap, conf->cs,
- &conf->smcconf);
+ atmel_hsmc_cs_conf_get(ebid->ebi->smc.regmap, ebid->ebi->smc.layout,
+ conf->cs, &conf->smcconf);
}
static const struct atmel_smc_timing_xlate timings_xlate_table[] = {
@@ -285,8 +286,8 @@ static void at91sam9_ebi_apply_config(struct atmel_ebi_dev *ebid,
static void sama5_ebi_apply_config(struct atmel_ebi_dev *ebid,
struct atmel_ebi_dev_config *conf)
{
- atmel_hsmc_cs_conf_apply(ebid->ebi->smc.regmap, conf->cs,
- &conf->smcconf);
+ atmel_hsmc_cs_conf_apply(ebid->ebi->smc.regmap, ebid->ebi->smc.layout,
+ conf->cs, &conf->smcconf);
}
static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np,
@@ -525,6 +526,10 @@ static int atmel_ebi_probe(struct platform_device *pdev)
if (IS_ERR(ebi->smc.regmap))
return PTR_ERR(ebi->smc.regmap);
+ ebi->smc.layout = atmel_hsmc_get_reg_layout(smc_np);
+ if (IS_ERR(ebi->smc.layout))
+ return PTR_ERR(ebi->smc.layout);
+
ebi->smc.clk = of_clk_get(smc_np, 0);
if (IS_ERR(ebi->smc.clk)) {
if (PTR_ERR(ebi->smc.clk) != -ENOENT)
diff --git a/drivers/mfd/atmel-smc.c b/drivers/mfd/atmel-smc.c
index 954cf0f66a31..1ad44e63b511 100644
--- a/drivers/mfd/atmel-smc.c
+++ b/drivers/mfd/atmel-smc.c
@@ -258,19 +258,21 @@ EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_apply);
* atmel_hsmc_cs_conf_apply - apply an SMC CS conf
*
* Applies an SMC CS configuration.
* Only valid on post-sama5 SoCs.
*/
-void atmel_hsmc_cs_conf_apply(struct regmap *regmap, int cs,
- const struct atmel_smc_cs_conf *conf)
+void atmel_hsmc_cs_conf_apply(struct regmap *regmap,
+ const struct atmel_hsmc_reg_layout *layout,
+ int cs, const struct atmel_smc_cs_conf *conf)
{
- regmap_write(regmap, ATMEL_HSMC_SETUP(cs), conf->setup);
- regmap_write(regmap, ATMEL_HSMC_PULSE(cs), conf->pulse);
- regmap_write(regmap, ATMEL_HSMC_CYCLE(cs), conf->cycle);
- regmap_write(regmap, ATMEL_HSMC_TIMINGS(cs), conf->timings);
- regmap_write(regmap, ATMEL_HSMC_MODE(cs), conf->mode);
+ regmap_write(regmap, ATMEL_HSMC_SETUP(layout, cs), conf->setup);
+ regmap_write(regmap, ATMEL_HSMC_PULSE(layout, cs), conf->pulse);
+ regmap_write(regmap, ATMEL_HSMC_CYCLE(layout, cs), conf->cycle);
+ regmap_write(regmap, ATMEL_HSMC_TIMINGS(layout, cs), conf->timings);
+ regmap_write(regmap, ATMEL_HSMC_MODE(layout, cs), conf->mode);
}
EXPORT_SYMBOL_GPL(atmel_hsmc_cs_conf_apply);
@@ -297,18 +299,55 @@ EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_get);
* atmel_hsmc_cs_conf_get - retrieve the current SMC CS conf
*
* Retrieve the SMC CS configuration.
* Only valid on post-sama5 SoCs.
*/
-void atmel_hsmc_cs_conf_get(struct regmap *regmap, int cs,
- struct atmel_smc_cs_conf *conf)
+void atmel_hsmc_cs_conf_get(struct regmap *regmap,
+ const struct atmel_hsmc_reg_layout *layout,
+ int cs, struct atmel_smc_cs_conf *conf)
{
- regmap_read(regmap, ATMEL_HSMC_SETUP(cs), &conf->setup);
- regmap_read(regmap, ATMEL_HSMC_PULSE(cs), &conf->pulse);
- regmap_read(regmap, ATMEL_HSMC_CYCLE(cs), &conf->cycle);
- regmap_read(regmap, ATMEL_HSMC_TIMINGS(cs), &conf->timings);
- regmap_read(regmap, ATMEL_HSMC_MODE(cs), &conf->mode);
+ regmap_read(regmap, ATMEL_HSMC_SETUP(layout, cs), &conf->setup);
+ regmap_read(regmap, ATMEL_HSMC_PULSE(layout, cs), &conf->pulse);
+ regmap_read(regmap, ATMEL_HSMC_CYCLE(layout, cs), &conf->cycle);
+ regmap_read(regmap, ATMEL_HSMC_TIMINGS(layout, cs), &conf->timings);
+ regmap_read(regmap, ATMEL_HSMC_MODE(layout, cs), &conf->mode);
}
EXPORT_SYMBOL_GPL(atmel_hsmc_cs_conf_get);
+
+static const struct atmel_hsmc_reg_layout sama5d3_reg_layout = {
+ .timing_regs_offset = 0x600,
+};
+
+static const struct atmel_hsmc_reg_layout sama5d2_reg_layout = {
+ .timing_regs_offset = 0x700,
+};
+
+static const struct of_device_id atmel_smc_ids[] = {
+ { .compatible = "atmel,at91sam9260-smc", .data = NULL },
+ { .compatible = "atmel,sama5d3-smc", .data = &sama5d3_reg_layout },
+ { .compatible = "atmel,sama5d2-smc", .data = &sama5d2_reg_layout },
+ { /* sentinel */ },
+};
+
+/**
+ * atmel_hsmc_get_reg_layout - retrieve the layout of HSMC registers
+ *
+ * Retrieve the layout of HSMC registers.
+ *
+ * Returns NULL in case of SMC, a struct atmel_hsmc_reg_layout pointer
+ * in HSMC case, otherwise ERR_PTR(-EINVAL).
+ */
+const struct atmel_hsmc_reg_layout *
+atmel_hsmc_get_reg_layout(struct device_node *np)
+{
+ const struct of_device_id *match;
+
+ match = of_match_node(atmel_hsmc_ids, np);
+
+ return match ? match->data : ERR_PTR(-EINVAL);
+}
+EXPORT_SYMBOL_GPL(atmel_hsmc_get_reg_layout);
diff --git a/drivers/mtd/nand/atmel/nand-controller.c b/drivers/mtd/nand/atmel/nand-controller.c
index d922a88e407f..29396e618965 100644
--- a/drivers/mtd/nand/atmel/nand-controller.c
+++ b/drivers/mtd/nand/atmel/nand-controller.c
@@ -247,6 +247,7 @@ struct atmel_hsmc_nand_controller {
void __iomem *virt;
dma_addr_t dma;
} sram;
+ const struct atmel_hsmc_reg_layout *hsmc_layout;
struct regmap *io;
struct atmel_nfc_op op;
struct completion complete;
@@ -1431,12 +1432,12 @@ static int atmel_hsmc_nand_setup_data_interface(struct atmel_nand *nand,
int csline,
const struct nand_data_interface *conf)
{
- struct atmel_nand_controller *nc;
+ struct atmel_hsmc_nand_controller *nc;
struct atmel_smc_cs_conf smcconf;
struct atmel_nand_cs *cs;
int ret;
- nc = to_nand_controller(nand->base.controller);
+ nc = to_hsmc_nand_controller(nand->base.controller);
ret = atmel_smc_nand_prepare_smcconf(nand, conf, &smcconf);
if (ret)
@@ -1451,7 +1452,8 @@ static int atmel_hsmc_nand_setup_data_interface(struct atmel_nand *nand,
if (cs->rb.type == ATMEL_NAND_NATIVE_RB)
cs->smcconf.timings |= ATMEL_HSMC_TIMINGS_RBNSEL(cs->rb.id);
- atmel_hsmc_cs_conf_apply(nc->smc, cs->id, &cs->smcconf);
+ atmel_hsmc_cs_conf_apply(nc->base.smc, nc->hsmc_layout, cs->id,
+ &cs->smcconf);
return 0;
}
@@ -2166,6 +2168,8 @@ atmel_hsmc_nand_controller_init(struct atmel_hsmc_nand_controller *nc)
return -EINVAL;
}
+ nc->hsmc_layout = atmel_hsmc_get_reg_layout(np);
+
nc->irq = of_irq_get(np, 0);
of_node_put(np);
if (nc->irq < 0) {
diff --git a/include/linux/mfd/syscon/atmel-smc.h b/include/linux/mfd/syscon/atmel-smc.h
index afa266169800..7a367f34b66a 100644
--- a/include/linux/mfd/syscon/atmel-smc.h
+++ b/include/linux/mfd/syscon/atmel-smc.h
@@ -15,21 +15,26 @@
#define _LINUX_MFD_SYSCON_ATMEL_SMC_H_
#include <linux/kernel.h>
+#include <linux/of.h>
#include <linux/regmap.h>
#define ATMEL_SMC_SETUP(cs) (((cs) * 0x10))
-#define ATMEL_HSMC_SETUP(cs) (0x600 + ((cs) * 0x14))
+#define ATMEL_HSMC_SETUP(layout, cs) \
+ ((layout)->timing_regs_offset + ((cs) * 0x14))
#define ATMEL_SMC_PULSE(cs) (((cs) * 0x10) + 0x4)
-#define ATMEL_HSMC_PULSE(cs) (0x600 + ((cs) * 0x14) + 0x4)
+#define ATMEL_HSMC_PULSE(layout, cs) \
+ ((layout)->timing_regs_offset + ((cs) * 0x14) + 0x4)
#define ATMEL_SMC_CYCLE(cs) (((cs) * 0x10) + 0x8)
-#define ATMEL_HSMC_CYCLE(cs) (0x600 + ((cs) * 0x14) + 0x8)
+#define ATMEL_HSMC_CYCLE(layout, cs) \
+ ((layout)->timing_regs_offset + ((cs) * 0x14) + 0x8)
#define ATMEL_SMC_NWE_SHIFT 0
#define ATMEL_SMC_NCS_WR_SHIFT 8
#define ATMEL_SMC_NRD_SHIFT 16
#define ATMEL_SMC_NCS_RD_SHIFT 24
#define ATMEL_SMC_MODE(cs) (((cs) * 0x10) + 0xc)
-#define ATMEL_HSMC_MODE(cs) (0x600 + ((cs) * 0x14) + 0x10)
+#define ATMEL_HSMC_MODE(layout, cs) \
+ ((layout)->timing_regs_offset + ((cs) * 0x14) + 0x10)
#define ATMEL_SMC_MODE_READMODE_MASK BIT(0)
#define ATMEL_SMC_MODE_READMODE_NCS (0 << 0)
#define ATMEL_SMC_MODE_READMODE_NRD (1 << 0)
@@ -59,7 +64,8 @@
#define ATMEL_SMC_MODE_PS_16 (2 << 28)
#define ATMEL_SMC_MODE_PS_32 (3 << 28)
-#define ATMEL_HSMC_TIMINGS(cs) (0x600 + ((cs) * 0x14) + 0xc)
+#define ATMEL_HSMC_TIMINGS(layout, cs) \
+ ((layout)->timing_regs_offset + ((cs) * 0x14) + 0xc)
#define ATMEL_HSMC_TIMINGS_OCMS BIT(12)
#define ATMEL_HSMC_TIMINGS_RBNSEL(x) ((x) << 28)
#define ATMEL_HSMC_TIMINGS_NFSEL BIT(31)
@@ -69,6 +75,10 @@
#define ATMEL_HSMC_TIMINGS_TRR_SHIFT 16
#define ATMEL_HSMC_TIMINGS_TWB_SHIFT 24
+struct atmel_hsmc_reg_layout {
+ unsigned int timing_regs_offset;
+};
+
/**
* struct atmel_smc_cs_conf - SMC CS config as described in the datasheet.
@@ -98,11 +108,15 @@ int atmel_smc_cs_conf_set_cycle(struct atmel_smc_cs_conf *conf,
unsigned int shift, unsigned int ncycles);
void atmel_smc_cs_conf_apply(struct regmap *regmap, int cs,
const struct atmel_smc_cs_conf *conf);
-void atmel_hsmc_cs_conf_apply(struct regmap *regmap, int cs,
- const struct atmel_smc_cs_conf *conf);
+void atmel_hsmc_cs_conf_apply(struct regmap *regmap,
+ const struct atmel_hsmc_reg_layout *reglayout,
+ int cs, const struct atmel_smc_cs_conf *conf);
void atmel_smc_cs_conf_get(struct regmap *regmap, int cs,
struct atmel_smc_cs_conf *conf);
-void atmel_hsmc_cs_conf_get(struct regmap *regmap, int cs,
- struct atmel_smc_cs_conf *conf);
+void atmel_hsmc_cs_conf_get(struct regmap *regmap,
+ const struct atmel_hsmc_reg_layout *reglayout,
+ int cs, struct atmel_smc_cs_conf *conf);
+const struct atmel_hsmc_reg_layout *
+atmel_hsmc_get_reg_layout(struct device_node *np);
#endif /* _LINUX_MFD_SYSCON_ATMEL_SMC_H_ */
Lee Jones
2017-07-18 08:15:08 UTC
Permalink
Post by Ludovic Desroches
For HSMC controller, the register layout depends on the device i.e. the
offset of setup, pulse, cycle, mode and timings registers is not the
same. An helper is added to provide the correct register layout.
Fixes: fe9d7cb22ef3 ("mfd: syscon: atmel-smc: Add new helpers to ease
SMC regs manipulation")
---
drivers/memory/atmel-ebi.c | 13 +++++--
drivers/mfd/atmel-smc.c | 67 +++++++++++++++++++++++++-------
drivers/mtd/nand/atmel/nand-controller.c | 10 +++--
include/linux/mfd/syscon/atmel-smc.h | 32 ++++++++++-----
4 files changed, 92 insertions(+), 30 deletions(-)
Applied, thanks.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Lee Jones
2017-07-18 09:12:38 UTC
Permalink
Post by Alexandre Belloni
Post by Ludovic Desroches
For HSMC controller, the register layout depends on the device i.e. the
offset of setup, pulse, cycle, mode and timings registers is not the
same. An helper is added to provide the correct register layout.
Fixes: fe9d7cb22ef3 ("mfd: syscon: atmel-smc: Add new helpers to ease
SMC regs manipulation")
---
drivers/memory/atmel-ebi.c | 13 +++++--
drivers/mfd/atmel-smc.c | 67 +++++++++++++++++++++++++-------
drivers/mtd/nand/atmel/nand-controller.c | 10 +++--
include/linux/mfd/syscon/atmel-smc.h | 32 ++++++++++-----
4 files changed, 92 insertions(+), 30 deletions(-)
Applied, thanks.
Apologies, it looks like this needs 2 more Acks before I can even
consider taking it.

Unapplied.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Nicolas Ferre
2017-07-18 09:23:43 UTC
Permalink
Post by Lee Jones
Post by Alexandre Belloni
Post by Ludovic Desroches
For HSMC controller, the register layout depends on the device i.e. the
offset of setup, pulse, cycle, mode and timings registers is not the
same. An helper is added to provide the correct register layout.
Fixes: fe9d7cb22ef3 ("mfd: syscon: atmel-smc: Add new helpers to ease
SMC regs manipulation")
---
drivers/memory/atmel-ebi.c | 13 +++++--
drivers/mfd/atmel-smc.c | 67 +++++++++++++++++++++++++-------
drivers/mtd/nand/atmel/nand-controller.c | 10 +++--
include/linux/mfd/syscon/atmel-smc.h | 32 ++++++++++-----
4 files changed, 92 insertions(+), 30 deletions(-)
Applied, thanks.
Apologies, it looks like this needs 2 more Acks before I can even
consider taking it.
Unapplied.
If mine is missing, here it is:

For the whole series:
Acked-by: Nicolas Ferre <***@microchip.com>

And I think that Alexandre seemed okay by discussing the path those
patches should take...


Thanks, bye,
--
Nicolas Ferre
Lee Jones
2017-07-18 09:37:13 UTC
Permalink
Post by Nicolas Ferre
Post by Lee Jones
Post by Alexandre Belloni
Post by Ludovic Desroches
For HSMC controller, the register layout depends on the device i.e. the
offset of setup, pulse, cycle, mode and timings registers is not the
same. An helper is added to provide the correct register layout.
Fixes: fe9d7cb22ef3 ("mfd: syscon: atmel-smc: Add new helpers to ease
SMC regs manipulation")
---
drivers/memory/atmel-ebi.c | 13 +++++--
drivers/mfd/atmel-smc.c | 67 +++++++++++++++++++++++++-------
drivers/mtd/nand/atmel/nand-controller.c | 10 +++--
include/linux/mfd/syscon/atmel-smc.h | 32 ++++++++++-----
4 files changed, 92 insertions(+), 30 deletions(-)
Applied, thanks.
Apologies, it looks like this needs 2 more Acks before I can even
consider taking it.
Unapplied.
And I think that Alexandre seemed okay by discussing the path those
patches should take...
Thanks Anlexadre and Nicolas.

Patch does not apply to v4.13-rc1 however.

Ludovic,

Could you please rebase this patch and apply the 2 new Acks please?

Please also apply my:

For my own reference:
Acked-for-MFD-by: Lee Jones <***@linaro.org>

... and I'll get it applied ASAP.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Ludovic Desroches
2017-07-18 09:56:31 UTC
Permalink
Post by Lee Jones
Post by Nicolas Ferre
Post by Lee Jones
Post by Alexandre Belloni
Post by Ludovic Desroches
For HSMC controller, the register layout depends on the device i.e. the
offset of setup, pulse, cycle, mode and timings registers is not the
same. An helper is added to provide the correct register layout.
Fixes: fe9d7cb22ef3 ("mfd: syscon: atmel-smc: Add new helpers to ease
SMC regs manipulation")
---
drivers/memory/atmel-ebi.c | 13 +++++--
drivers/mfd/atmel-smc.c | 67 +++++++++++++++++++++++++-------
drivers/mtd/nand/atmel/nand-controller.c | 10 +++--
include/linux/mfd/syscon/atmel-smc.h | 32 ++++++++++-----
4 files changed, 92 insertions(+), 30 deletions(-)
Applied, thanks.
Apologies, it looks like this needs 2 more Acks before I can even
consider taking it.
Unapplied.
And I think that Alexandre seemed okay by discussing the path those
patches should take...
Thanks Anlexadre and Nicolas.
Patch does not apply to v4.13-rc1 however.
Ludovic,
Could you please rebase this patch and apply the 2 new Acks please?
Ok, I'll rebase the patch on top of v4.13-rc1 and resend it.

Ludovic
Post by Lee Jones
... and I'll get it applied ASAP.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Alexandre Belloni
2017-07-18 09:24:08 UTC
Permalink
Post by Ludovic Desroches
For HSMC controller, the register layout depends on the device i.e. the
offset of setup, pulse, cycle, mode and timings registers is not the
same. An helper is added to provide the correct register layout.
Fixes: fe9d7cb22ef3 ("mfd: syscon: atmel-smc: Add new helpers to ease
SMC regs manipulation")
---
drivers/memory/atmel-ebi.c | 13 +++++--
drivers/mfd/atmel-smc.c | 67 +++++++++++++++++++++++++-------
drivers/mtd/nand/atmel/nand-controller.c | 10 +++--
include/linux/mfd/syscon/atmel-smc.h | 32 ++++++++++-----
4 files changed, 92 insertions(+), 30 deletions(-)
diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c
index 99e644cda4d1..63c9e7a76854 100644
--- a/drivers/memory/atmel-ebi.c
+++ b/drivers/memory/atmel-ebi.c
@@ -51,6 +51,7 @@ struct atmel_ebi {
struct {
struct regmap *regmap;
struct clk *clk;
+ const struct atmel_hsmc_reg_layout *layout;
} smc;
struct device *dev;
@@ -84,8 +85,8 @@ static void at91sam9_ebi_get_config(struct atmel_ebi_dev *ebid,
static void sama5_ebi_get_config(struct atmel_ebi_dev *ebid,
struct atmel_ebi_dev_config *conf)
{
- atmel_hsmc_cs_conf_get(ebid->ebi->smc.regmap, conf->cs,
- &conf->smcconf);
+ atmel_hsmc_cs_conf_get(ebid->ebi->smc.regmap, ebid->ebi->smc.layout,
+ conf->cs, &conf->smcconf);
}
static const struct atmel_smc_timing_xlate timings_xlate_table[] = {
@@ -285,8 +286,8 @@ static void at91sam9_ebi_apply_config(struct atmel_ebi_dev *ebid,
static void sama5_ebi_apply_config(struct atmel_ebi_dev *ebid,
struct atmel_ebi_dev_config *conf)
{
- atmel_hsmc_cs_conf_apply(ebid->ebi->smc.regmap, conf->cs,
- &conf->smcconf);
+ atmel_hsmc_cs_conf_apply(ebid->ebi->smc.regmap, ebid->ebi->smc.layout,
+ conf->cs, &conf->smcconf);
}
static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np,
@@ -525,6 +526,10 @@ static int atmel_ebi_probe(struct platform_device *pdev)
if (IS_ERR(ebi->smc.regmap))
return PTR_ERR(ebi->smc.regmap);
+ ebi->smc.layout = atmel_hsmc_get_reg_layout(smc_np);
+ if (IS_ERR(ebi->smc.layout))
+ return PTR_ERR(ebi->smc.layout);
+
ebi->smc.clk = of_clk_get(smc_np, 0);
if (IS_ERR(ebi->smc.clk)) {
if (PTR_ERR(ebi->smc.clk) != -ENOENT)
diff --git a/drivers/mfd/atmel-smc.c b/drivers/mfd/atmel-smc.c
index 954cf0f66a31..1ad44e63b511 100644
--- a/drivers/mfd/atmel-smc.c
+++ b/drivers/mfd/atmel-smc.c
@@ -258,19 +258,21 @@ EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_apply);
* atmel_hsmc_cs_conf_apply - apply an SMC CS conf
*
* Applies an SMC CS configuration.
* Only valid on post-sama5 SoCs.
*/
-void atmel_hsmc_cs_conf_apply(struct regmap *regmap, int cs,
- const struct atmel_smc_cs_conf *conf)
+void atmel_hsmc_cs_conf_apply(struct regmap *regmap,
+ const struct atmel_hsmc_reg_layout *layout,
+ int cs, const struct atmel_smc_cs_conf *conf)
{
- regmap_write(regmap, ATMEL_HSMC_SETUP(cs), conf->setup);
- regmap_write(regmap, ATMEL_HSMC_PULSE(cs), conf->pulse);
- regmap_write(regmap, ATMEL_HSMC_CYCLE(cs), conf->cycle);
- regmap_write(regmap, ATMEL_HSMC_TIMINGS(cs), conf->timings);
- regmap_write(regmap, ATMEL_HSMC_MODE(cs), conf->mode);
+ regmap_write(regmap, ATMEL_HSMC_SETUP(layout, cs), conf->setup);
+ regmap_write(regmap, ATMEL_HSMC_PULSE(layout, cs), conf->pulse);
+ regmap_write(regmap, ATMEL_HSMC_CYCLE(layout, cs), conf->cycle);
+ regmap_write(regmap, ATMEL_HSMC_TIMINGS(layout, cs), conf->timings);
+ regmap_write(regmap, ATMEL_HSMC_MODE(layout, cs), conf->mode);
}
EXPORT_SYMBOL_GPL(atmel_hsmc_cs_conf_apply);
@@ -297,18 +299,55 @@ EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_get);
* atmel_hsmc_cs_conf_get - retrieve the current SMC CS conf
*
* Retrieve the SMC CS configuration.
* Only valid on post-sama5 SoCs.
*/
-void atmel_hsmc_cs_conf_get(struct regmap *regmap, int cs,
- struct atmel_smc_cs_conf *conf)
+void atmel_hsmc_cs_conf_get(struct regmap *regmap,
+ const struct atmel_hsmc_reg_layout *layout,
+ int cs, struct atmel_smc_cs_conf *conf)
{
- regmap_read(regmap, ATMEL_HSMC_SETUP(cs), &conf->setup);
- regmap_read(regmap, ATMEL_HSMC_PULSE(cs), &conf->pulse);
- regmap_read(regmap, ATMEL_HSMC_CYCLE(cs), &conf->cycle);
- regmap_read(regmap, ATMEL_HSMC_TIMINGS(cs), &conf->timings);
- regmap_read(regmap, ATMEL_HSMC_MODE(cs), &conf->mode);
+ regmap_read(regmap, ATMEL_HSMC_SETUP(layout, cs), &conf->setup);
+ regmap_read(regmap, ATMEL_HSMC_PULSE(layout, cs), &conf->pulse);
+ regmap_read(regmap, ATMEL_HSMC_CYCLE(layout, cs), &conf->cycle);
+ regmap_read(regmap, ATMEL_HSMC_TIMINGS(layout, cs), &conf->timings);
+ regmap_read(regmap, ATMEL_HSMC_MODE(layout, cs), &conf->mode);
}
EXPORT_SYMBOL_GPL(atmel_hsmc_cs_conf_get);
+
+static const struct atmel_hsmc_reg_layout sama5d3_reg_layout = {
+ .timing_regs_offset = 0x600,
+};
+
+static const struct atmel_hsmc_reg_layout sama5d2_reg_layout = {
+ .timing_regs_offset = 0x700,
+};
+
+static const struct of_device_id atmel_smc_ids[] = {
+ { .compatible = "atmel,at91sam9260-smc", .data = NULL },
+ { .compatible = "atmel,sama5d3-smc", .data = &sama5d3_reg_layout },
+ { .compatible = "atmel,sama5d2-smc", .data = &sama5d2_reg_layout },
+ { /* sentinel */ },
+};
+
+/**
+ * atmel_hsmc_get_reg_layout - retrieve the layout of HSMC registers
+ *
+ * Retrieve the layout of HSMC registers.
+ *
+ * Returns NULL in case of SMC, a struct atmel_hsmc_reg_layout pointer
+ * in HSMC case, otherwise ERR_PTR(-EINVAL).
+ */
+const struct atmel_hsmc_reg_layout *
+atmel_hsmc_get_reg_layout(struct device_node *np)
+{
+ const struct of_device_id *match;
+
+ match = of_match_node(atmel_hsmc_ids, np);
+
+ return match ? match->data : ERR_PTR(-EINVAL);
+}
+EXPORT_SYMBOL_GPL(atmel_hsmc_get_reg_layout);
diff --git a/drivers/mtd/nand/atmel/nand-controller.c b/drivers/mtd/nand/atmel/nand-controller.c
index d922a88e407f..29396e618965 100644
--- a/drivers/mtd/nand/atmel/nand-controller.c
+++ b/drivers/mtd/nand/atmel/nand-controller.c
@@ -247,6 +247,7 @@ struct atmel_hsmc_nand_controller {
void __iomem *virt;
dma_addr_t dma;
} sram;
+ const struct atmel_hsmc_reg_layout *hsmc_layout;
struct regmap *io;
struct atmel_nfc_op op;
struct completion complete;
@@ -1431,12 +1432,12 @@ static int atmel_hsmc_nand_setup_data_interface(struct atmel_nand *nand,
int csline,
const struct nand_data_interface *conf)
{
- struct atmel_nand_controller *nc;
+ struct atmel_hsmc_nand_controller *nc;
struct atmel_smc_cs_conf smcconf;
struct atmel_nand_cs *cs;
int ret;
- nc = to_nand_controller(nand->base.controller);
+ nc = to_hsmc_nand_controller(nand->base.controller);
ret = atmel_smc_nand_prepare_smcconf(nand, conf, &smcconf);
if (ret)
@@ -1451,7 +1452,8 @@ static int atmel_hsmc_nand_setup_data_interface(struct atmel_nand *nand,
if (cs->rb.type == ATMEL_NAND_NATIVE_RB)
cs->smcconf.timings |= ATMEL_HSMC_TIMINGS_RBNSEL(cs->rb.id);
- atmel_hsmc_cs_conf_apply(nc->smc, cs->id, &cs->smcconf);
+ atmel_hsmc_cs_conf_apply(nc->base.smc, nc->hsmc_layout, cs->id,
+ &cs->smcconf);
return 0;
}
@@ -2166,6 +2168,8 @@ atmel_hsmc_nand_controller_init(struct atmel_hsmc_nand_controller *nc)
return -EINVAL;
}
+ nc->hsmc_layout = atmel_hsmc_get_reg_layout(np);
+
nc->irq = of_irq_get(np, 0);
of_node_put(np);
if (nc->irq < 0) {
diff --git a/include/linux/mfd/syscon/atmel-smc.h b/include/linux/mfd/syscon/atmel-smc.h
index afa266169800..7a367f34b66a 100644
--- a/include/linux/mfd/syscon/atmel-smc.h
+++ b/include/linux/mfd/syscon/atmel-smc.h
@@ -15,21 +15,26 @@
#define _LINUX_MFD_SYSCON_ATMEL_SMC_H_
#include <linux/kernel.h>
+#include <linux/of.h>
#include <linux/regmap.h>
#define ATMEL_SMC_SETUP(cs) (((cs) * 0x10))
-#define ATMEL_HSMC_SETUP(cs) (0x600 + ((cs) * 0x14))
+#define ATMEL_HSMC_SETUP(layout, cs) \
+ ((layout)->timing_regs_offset + ((cs) * 0x14))
#define ATMEL_SMC_PULSE(cs) (((cs) * 0x10) + 0x4)
-#define ATMEL_HSMC_PULSE(cs) (0x600 + ((cs) * 0x14) + 0x4)
+#define ATMEL_HSMC_PULSE(layout, cs) \
+ ((layout)->timing_regs_offset + ((cs) * 0x14) + 0x4)
#define ATMEL_SMC_CYCLE(cs) (((cs) * 0x10) + 0x8)
-#define ATMEL_HSMC_CYCLE(cs) (0x600 + ((cs) * 0x14) + 0x8)
+#define ATMEL_HSMC_CYCLE(layout, cs) \
+ ((layout)->timing_regs_offset + ((cs) * 0x14) + 0x8)
#define ATMEL_SMC_NWE_SHIFT 0
#define ATMEL_SMC_NCS_WR_SHIFT 8
#define ATMEL_SMC_NRD_SHIFT 16
#define ATMEL_SMC_NCS_RD_SHIFT 24
#define ATMEL_SMC_MODE(cs) (((cs) * 0x10) + 0xc)
-#define ATMEL_HSMC_MODE(cs) (0x600 + ((cs) * 0x14) + 0x10)
+#define ATMEL_HSMC_MODE(layout, cs) \
+ ((layout)->timing_regs_offset + ((cs) * 0x14) + 0x10)
#define ATMEL_SMC_MODE_READMODE_MASK BIT(0)
#define ATMEL_SMC_MODE_READMODE_NCS (0 << 0)
#define ATMEL_SMC_MODE_READMODE_NRD (1 << 0)
@@ -59,7 +64,8 @@
#define ATMEL_SMC_MODE_PS_16 (2 << 28)
#define ATMEL_SMC_MODE_PS_32 (3 << 28)
-#define ATMEL_HSMC_TIMINGS(cs) (0x600 + ((cs) * 0x14) + 0xc)
+#define ATMEL_HSMC_TIMINGS(layout, cs) \
+ ((layout)->timing_regs_offset + ((cs) * 0x14) + 0xc)
#define ATMEL_HSMC_TIMINGS_OCMS BIT(12)
#define ATMEL_HSMC_TIMINGS_RBNSEL(x) ((x) << 28)
#define ATMEL_HSMC_TIMINGS_NFSEL BIT(31)
@@ -69,6 +75,10 @@
#define ATMEL_HSMC_TIMINGS_TRR_SHIFT 16
#define ATMEL_HSMC_TIMINGS_TWB_SHIFT 24
+struct atmel_hsmc_reg_layout {
+ unsigned int timing_regs_offset;
+};
+
/**
* struct atmel_smc_cs_conf - SMC CS config as described in the datasheet.
@@ -98,11 +108,15 @@ int atmel_smc_cs_conf_set_cycle(struct atmel_smc_cs_conf *conf,
unsigned int shift, unsigned int ncycles);
void atmel_smc_cs_conf_apply(struct regmap *regmap, int cs,
const struct atmel_smc_cs_conf *conf);
-void atmel_hsmc_cs_conf_apply(struct regmap *regmap, int cs,
- const struct atmel_smc_cs_conf *conf);
+void atmel_hsmc_cs_conf_apply(struct regmap *regmap,
+ const struct atmel_hsmc_reg_layout *reglayout,
+ int cs, const struct atmel_smc_cs_conf *conf);
void atmel_smc_cs_conf_get(struct regmap *regmap, int cs,
struct atmel_smc_cs_conf *conf);
-void atmel_hsmc_cs_conf_get(struct regmap *regmap, int cs,
- struct atmel_smc_cs_conf *conf);
+void atmel_hsmc_cs_conf_get(struct regmap *regmap,
+ const struct atmel_hsmc_reg_layout *reglayout,
+ int cs, struct atmel_smc_cs_conf *conf);
+const struct atmel_hsmc_reg_layout *
+atmel_hsmc_get_reg_layout(struct device_node *np);
#endif /* _LINUX_MFD_SYSCON_ATMEL_SMC_H_ */
--
2.12.2
--
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
Nicolas Ferre
2017-07-11 07:52:58 UTC
Permalink
Post by Ludovic Desroches
A new compatible string has been introduced for sama5d2 SMC to allow to
manage the registers mapping change.
---
arch/arm/boot/dts/sama5d2.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 4fcd5bb219e3..60e69aeacbdb 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -1048,7 +1048,7 @@
};
- compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
+ compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
You'd better use something like:
compatible = "atmel,sama5d2-smc", "atmel,sama5d3-smc", "syscon", "simple-mfd";

So that this patch is independent from the rest of the series and
we can avoid to having to synchronize with mfd or mtd/nand for this part.

Regards,
Post by Ludovic Desroches
reg = <0xf8014000 0x1000>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
clocks = <&hsmc_clk>;
--
Nicolas Ferre
Ludovic Desroches
2017-07-11 07:58:29 UTC
Permalink
Post by Nicolas Ferre
Post by Ludovic Desroches
A new compatible string has been introduced for sama5d2 SMC to allow to
manage the registers mapping change.
---
arch/arm/boot/dts/sama5d2.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 4fcd5bb219e3..60e69aeacbdb 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -1048,7 +1048,7 @@
};
- compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
+ compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
compatible = "atmel,sama5d2-smc", "atmel,sama5d3-smc", "syscon", "simple-mfd";
But it's not true, during data interface setup, we will write values in
the wrong place if we fallback on "atmel,sama5d3-smc".

Regards

Ludovic
Post by Nicolas Ferre
So that this patch is independent from the rest of the series and
we can avoid to having to synchronize with mfd or mtd/nand for this part.
Regards,
Post by Ludovic Desroches
reg = <0xf8014000 0x1000>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
clocks = <&hsmc_clk>;
--
Nicolas Ferre
Nicolas Ferre
2017-07-11 08:07:00 UTC
Permalink
Post by Ludovic Desroches
Post by Nicolas Ferre
Post by Ludovic Desroches
A new compatible string has been introduced for sama5d2 SMC to allow to
manage the registers mapping change.
---
arch/arm/boot/dts/sama5d2.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 4fcd5bb219e3..60e69aeacbdb 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -1048,7 +1048,7 @@
};
- compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
+ compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
compatible = "atmel,sama5d2-smc", "atmel,sama5d3-smc", "syscon", "simple-mfd";
But it's not true, during data interface setup, we will write values in
the wrong place if we fallback on "atmel,sama5d3-smc".
Yes, I wrote too quickly: sorry for the noise ;-)

Bye,
Post by Ludovic Desroches
Post by Nicolas Ferre
So that this patch is independent from the rest of the series and
we can avoid to having to synchronize with mfd or mtd/nand for this part.
Regards,
Post by Ludovic Desroches
reg = <0xf8014000 0x1000>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
clocks = <&hsmc_clk>;
--
Nicolas Ferre
--
Nicolas Ferre
Ludovic Desroches
2017-07-11 08:08:53 UTC
Permalink
Post by Ludovic Desroches
Post by Nicolas Ferre
Post by Ludovic Desroches
A new compatible string has been introduced for sama5d2 SMC to allow to
manage the registers mapping change.
---
arch/arm/boot/dts/sama5d2.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 4fcd5bb219e3..60e69aeacbdb 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -1048,7 +1048,7 @@
};
- compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
+ compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
compatible = "atmel,sama5d2-smc", "atmel,sama5d3-smc", "syscon", "simple-mfd";
But it's not true, during data interface setup, we will write values in
the wrong place if we fallback on "atmel,sama5d3-smc".
Regards
Ludovic
Post by Nicolas Ferre
So that this patch is independent from the rest of the series and
we can avoid to having to synchronize with mfd or mtd/nand for this part.
If Lee and Boris agree, maybe the series can go through AT91.

Regards

Ludovic
Post by Ludovic Desroches
Post by Nicolas Ferre
Regards,
Post by Ludovic Desroches
reg = <0xf8014000 0x1000>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
clocks = <&hsmc_clk>;
--
Nicolas Ferre
Lee Jones
2017-07-11 09:25:56 UTC
Permalink
Post by Ludovic Desroches
Post by Ludovic Desroches
Post by Nicolas Ferre
Post by Ludovic Desroches
A new compatible string has been introduced for sama5d2 SMC to allow to
manage the registers mapping change.
---
arch/arm/boot/dts/sama5d2.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 4fcd5bb219e3..60e69aeacbdb 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -1048,7 +1048,7 @@
};
- compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
+ compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
compatible = "atmel,sama5d2-smc", "atmel,sama5d3-smc", "syscon", "simple-mfd";
But it's not true, during data interface setup, we will write values in
the wrong place if we fallback on "atmel,sama5d3-smc".
Regards
Ludovic
Post by Nicolas Ferre
So that this patch is independent from the rest of the series and
we can avoid to having to synchronize with mfd or mtd/nand for this part.
If Lee and Boris agree, maybe the series can go through AT91.
That's fine, but if the series goes though another tree, I will
require a pull-request.

I am also happy to carry though the MFD tree (and will of course send
out a PR to the other affected Maintainers).
Post by Ludovic Desroches
Post by Ludovic Desroches
Post by Nicolas Ferre
Regards,
Post by Ludovic Desroches
reg = <0xf8014000 0x1000>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
clocks = <&hsmc_clk>;
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Alexandre Belloni
2017-07-12 13:59:27 UTC
Permalink
Post by Lee Jones
Post by Ludovic Desroches
Post by Ludovic Desroches
Post by Nicolas Ferre
Post by Ludovic Desroches
A new compatible string has been introduced for sama5d2 SMC to allow to
manage the registers mapping change.
---
arch/arm/boot/dts/sama5d2.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 4fcd5bb219e3..60e69aeacbdb 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -1048,7 +1048,7 @@
};
- compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
+ compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
compatible = "atmel,sama5d2-smc", "atmel,sama5d3-smc", "syscon", "simple-mfd";
But it's not true, during data interface setup, we will write values in
the wrong place if we fallback on "atmel,sama5d3-smc".
Regards
Ludovic
Post by Nicolas Ferre
So that this patch is independent from the rest of the series and
we can avoid to having to synchronize with mfd or mtd/nand for this part.
If Lee and Boris agree, maybe the series can go through AT91.
That's fine, but if the series goes though another tree, I will
require a pull-request.
I am also happy to carry though the MFD tree (and will of course send
out a PR to the other affected Maintainers).
I think the easiest is that you take the first two patches through mfd
and I'll take the third one through at91.

Our plan is to get everything fixed for the final 4.13 (I'll send the DT
as a fix, on top of 4.13-rc1). Is that OK for you ?
--
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
Lee Jones
2017-07-13 07:59:32 UTC
Permalink
Post by Alexandre Belloni
Post by Lee Jones
Post by Ludovic Desroches
Post by Ludovic Desroches
Post by Nicolas Ferre
Post by Ludovic Desroches
A new compatible string has been introduced for sama5d2 SMC to allow to
manage the registers mapping change.
---
arch/arm/boot/dts/sama5d2.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 4fcd5bb219e3..60e69aeacbdb 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -1048,7 +1048,7 @@
};
- compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
+ compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
compatible = "atmel,sama5d2-smc", "atmel,sama5d3-smc", "syscon", "simple-mfd";
But it's not true, during data interface setup, we will write values in
the wrong place if we fallback on "atmel,sama5d3-smc".
Regards
Ludovic
Post by Nicolas Ferre
So that this patch is independent from the rest of the series and
we can avoid to having to synchronize with mfd or mtd/nand for this part.
If Lee and Boris agree, maybe the series can go through AT91.
That's fine, but if the series goes though another tree, I will
require a pull-request.
I am also happy to carry though the MFD tree (and will of course send
out a PR to the other affected Maintainers).
I think the easiest is that you take the first two patches through mfd
and I'll take the third one through at91.
Our plan is to get everything fixed for the final 4.13 (I'll send the DT
as a fix, on top of 4.13-rc1). Is that OK for you ?
Perfect.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Alexandre Belloni
2017-07-17 09:17:26 UTC
Permalink
Post by Ludovic Desroches
A new compatible string has been introduced for sama5d2 SMC to allow to
manage the registers mapping change.
---
arch/arm/boot/dts/sama5d2.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Applied, thanks.
--
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
Loading...