Discussion:
[PATCH v3 03/12] ASoC: add new ac97 bus support
Robert Jarzmik
2017-06-30 19:43:59 UTC
Permalink
Add the new ac97 bus support, with ac97 bus automatic probing.

Signed-off-by: Robert Jarzmik <***@free.fr>
Acked-by: Charles Keepax <***@opensource.wolfsonmicro.com>
---
sound/Kconfig | 2 ++
sound/Makefile | 1 +
sound/soc/Kconfig | 4 ++++
3 files changed, 7 insertions(+)

diff --git a/sound/Kconfig b/sound/Kconfig
index ee2e69a9ecd1..141b145c4195 100644
--- a/sound/Kconfig
+++ b/sound/Kconfig
@@ -80,6 +80,8 @@ source "sound/hda/Kconfig"

source "sound/ppc/Kconfig"

+source "sound/ac97/Kconfig"
+
source "sound/aoa/Kconfig"

source "sound/arm/Kconfig"
diff --git a/sound/Makefile b/sound/Makefile
index 6de45d2c32f7..c03b0bed65d5 100644
--- a/sound/Makefile
+++ b/sound/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_SND_AOA) += aoa/

# This one must be compilable even if sound is configured out
obj-$(CONFIG_AC97_BUS) += ac97_bus.o
+obj-$(CONFIG_AC97_BUS_NEW) += ac97/

ifeq ($(CONFIG_SND),y)
obj-y += last.o
diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig
index 182d92efc7c8..5ad0a0422054 100644
--- a/sound/soc/Kconfig
+++ b/sound/soc/Kconfig
@@ -6,6 +6,7 @@ menuconfig SND_SOC
tristate "ALSA for SoC audio support"
select SND_PCM
select AC97_BUS if SND_SOC_AC97_BUS
+ select AC97_BUS_NEW if SND_SOC_AC97_BUS_NEW
select SND_JACK
select REGMAP_I2C if I2C
select REGMAP_SPI if SPI_MASTER
@@ -25,6 +26,9 @@ if SND_SOC
config SND_SOC_AC97_BUS
bool

+config SND_SOC_AC97_BUS_NEW
+ bool
+
config SND_SOC_GENERIC_DMAENGINE_PCM
bool
select SND_DMAENGINE_PCM
--
2.11.0
Robert Jarzmik
2017-06-30 19:44:01 UTC
Permalink
wm97xx-core does several things in it initialization :
- touchscreen input device setup
- battery device creation

As the wm97xx is actually a multi-function device handling an audio
codec, a touchscreen, a gpio block and an ADC, reshape the probing to
isolate what is truly input/touchscreen specific from the remaining
part.

This is only code shuffling, there is no functional change.

Signed-off-by: Robert Jarzmik <***@free.fr>
Acked-by: Dmitry Torokhov <***@gmail.com>
---
Since v1:
- took into account Charles's comment
---
drivers/input/touchscreen/wm97xx-core.c | 196 +++++++++++++++++++-------------
1 file changed, 115 insertions(+), 81 deletions(-)

diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index c9d1c91e1887..39869ffdc4fa 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -581,27 +581,85 @@ static void wm97xx_ts_input_close(struct input_dev *idev)
wm->codec->acc_enable(wm, 0);
}

-static int wm97xx_probe(struct device *dev)
+static int wm97xx_register_touch(struct wm97xx *wm)
{
- struct wm97xx *wm;
- struct wm97xx_pdata *pdata = dev_get_platdata(dev);
- int ret = 0, id = 0;
+ struct wm97xx_pdata *pdata = dev_get_platdata(wm->dev);
+ int ret;

- wm = kzalloc(sizeof(struct wm97xx), GFP_KERNEL);
- if (!wm)
+ wm->input_dev = devm_input_allocate_device(wm->dev);
+ if (wm->input_dev == NULL)
return -ENOMEM;
- mutex_init(&wm->codec_mutex);

- wm->dev = dev;
- dev_set_drvdata(dev, wm);
- wm->ac97 = to_ac97_t(dev);
+ /* set up touch configuration */
+ wm->input_dev->name = "wm97xx touchscreen";
+ wm->input_dev->phys = "wm97xx";
+ wm->input_dev->open = wm97xx_ts_input_open;
+ wm->input_dev->close = wm97xx_ts_input_close;
+
+ __set_bit(EV_ABS, wm->input_dev->evbit);
+ __set_bit(EV_KEY, wm->input_dev->evbit);
+ __set_bit(BTN_TOUCH, wm->input_dev->keybit);
+
+ input_set_abs_params(wm->input_dev, ABS_X, abs_x[0], abs_x[1],
+ abs_x[2], 0);
+ input_set_abs_params(wm->input_dev, ABS_Y, abs_y[0], abs_y[1],
+ abs_y[2], 0);
+ input_set_abs_params(wm->input_dev, ABS_PRESSURE, abs_p[0], abs_p[1],
+ abs_p[2], 0);
+
+ input_set_drvdata(wm->input_dev, wm);
+ wm->input_dev->dev.parent = wm->dev;
+
+ ret = input_register_device(wm->input_dev);
+ if (ret)
+ return ret;
+
+ /*
+ * register our extended touch device (for machine specific
+ * extensions)
+ */
+ wm->touch_dev = platform_device_alloc("wm97xx-touch", -1);
+ if (!wm->touch_dev) {
+ ret = -ENOMEM;
+ goto touch_err;
+ }
+ platform_set_drvdata(wm->touch_dev, wm);
+ wm->touch_dev->dev.parent = wm->dev;
+ wm->touch_dev->dev.platform_data = pdata;
+ ret = platform_device_add(wm->touch_dev);
+ if (ret < 0)
+ goto touch_reg_err;
+
+ return 0;
+touch_reg_err:
+ platform_device_put(wm->touch_dev);
+touch_err:
+ input_unregister_device(wm->input_dev);
+ wm->input_dev = NULL;
+
+ return ret;
+}
+
+static void wm97xx_unregister_touch(struct wm97xx *wm)
+{
+ platform_device_unregister(wm->touch_dev);
+ input_unregister_device(wm->input_dev);
+ wm->input_dev = NULL;
+}
+
+static int _wm97xx_probe(struct wm97xx *wm)
+{
+ int id = 0;
+
+ mutex_init(&wm->codec_mutex);
+ dev_set_drvdata(wm->dev, wm);

/* check that we have a supported codec */
id = wm97xx_reg_read(wm, AC97_VENDOR_ID1);
if (id != WM97XX_ID1) {
- dev_err(dev, "Device with vendor %04x is not a wm97xx\n", id);
- ret = -ENODEV;
- goto alloc_err;
+ dev_err(wm->dev,
+ "Device with vendor %04x is not a wm97xx\n", id);
+ return -ENODEV;
}

wm->id = wm97xx_reg_read(wm, AC97_VENDOR_ID2);
@@ -629,8 +687,7 @@ static int wm97xx_probe(struct device *dev)
default:
dev_err(wm->dev, "Support for wm97%02x not compiled in.\n",
wm->id & 0xff);
- ret = -ENODEV;
- goto alloc_err;
+ return -ENODEV;
}

/* set up physical characteristics */
@@ -644,79 +701,58 @@ static int wm97xx_probe(struct device *dev)
wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE);

- wm->input_dev = input_allocate_device();
- if (wm->input_dev == NULL) {
- ret = -ENOMEM;
- goto alloc_err;
- }
-
- /* set up touch configuration */
- wm->input_dev->name = "wm97xx touchscreen";
- wm->input_dev->phys = "wm97xx";
- wm->input_dev->open = wm97xx_ts_input_open;
- wm->input_dev->close = wm97xx_ts_input_close;
-
- __set_bit(EV_ABS, wm->input_dev->evbit);
- __set_bit(EV_KEY, wm->input_dev->evbit);
- __set_bit(BTN_TOUCH, wm->input_dev->keybit);
-
- input_set_abs_params(wm->input_dev, ABS_X, abs_x[0], abs_x[1],
- abs_x[2], 0);
- input_set_abs_params(wm->input_dev, ABS_Y, abs_y[0], abs_y[1],
- abs_y[2], 0);
- input_set_abs_params(wm->input_dev, ABS_PRESSURE, abs_p[0], abs_p[1],
- abs_p[2], 0);
+ return wm97xx_register_touch(wm);
+}

- input_set_drvdata(wm->input_dev, wm);
- wm->input_dev->dev.parent = dev;
+static void wm97xx_remove_battery(struct wm97xx *wm)
+{
+ platform_device_unregister(wm->battery_dev);
+}

- ret = input_register_device(wm->input_dev);
- if (ret < 0)
- goto dev_alloc_err;
+static int wm97xx_add_battery(struct wm97xx *wm,
+ struct wm97xx_batt_pdata *pdata)
+{
+ int ret;

- /* register our battery device */
wm->battery_dev = platform_device_alloc("wm97xx-battery", -1);
- if (!wm->battery_dev) {
- ret = -ENOMEM;
- goto batt_err;
- }
+ if (!wm->battery_dev)
+ return -ENOMEM;
+
platform_set_drvdata(wm->battery_dev, wm);
- wm->battery_dev->dev.parent = dev;
- wm->battery_dev->dev.platform_data = pdata ? pdata->batt_pdata : NULL;
+ wm->battery_dev->dev.parent = wm->dev;
+ wm->battery_dev->dev.platform_data = pdata;
ret = platform_device_add(wm->battery_dev);
- if (ret < 0)
- goto batt_reg_err;
+ if (ret)
+ platform_device_put(wm->battery_dev);

- /* register our extended touch device (for machine specific
- * extensions) */
- wm->touch_dev = platform_device_alloc("wm97xx-touch", -1);
- if (!wm->touch_dev) {
- ret = -ENOMEM;
- goto touch_err;
- }
- platform_set_drvdata(wm->touch_dev, wm);
- wm->touch_dev->dev.parent = dev;
- wm->touch_dev->dev.platform_data = pdata;
- ret = platform_device_add(wm->touch_dev);
+ return ret;
+}
+
+static int wm97xx_probe(struct device *dev)
+{
+ struct wm97xx *wm;
+ int ret;
+ struct wm97xx_pdata *pdata = dev_get_platdata(dev);
+
+ wm = devm_kzalloc(dev, sizeof(struct wm97xx), GFP_KERNEL);
+ if (!wm)
+ return -ENOMEM;
+
+ wm->dev = dev;
+ wm->ac97 = to_ac97_t(dev);
+
+ ret = _wm97xx_probe(wm);
+ if (ret)
+ return ret;
+
+ ret = wm97xx_add_battery(wm, pdata ? pdata->batt_pdata : NULL);
if (ret < 0)
- goto touch_reg_err;
+ goto batt_err;

return ret;

- touch_reg_err:
- platform_device_put(wm->touch_dev);
- touch_err:
- platform_device_del(wm->battery_dev);
- batt_reg_err:
- platform_device_put(wm->battery_dev);
- batt_err:
- input_unregister_device(wm->input_dev);
- wm->input_dev = NULL;
- dev_alloc_err:
- input_free_device(wm->input_dev);
- alloc_err:
- kfree(wm);
-
+batt_err:
+ wm97xx_unregister_touch(wm);
return ret;
}

@@ -724,10 +760,8 @@ static int wm97xx_remove(struct device *dev)
{
struct wm97xx *wm = dev_get_drvdata(dev);

- platform_device_unregister(wm->battery_dev);
- platform_device_unregister(wm->touch_dev);
- input_unregister_device(wm->input_dev);
- kfree(wm);
+ wm97xx_remove_battery(wm);
+ wm97xx_unregister_touch(wm);

return 0;
}
--
2.11.0
Charles Keepax
2017-07-03 08:58:17 UTC
Permalink
Post by Robert Jarzmik
- touchscreen input device setup
- battery device creation
As the wm97xx is actually a multi-function device handling an audio
codec, a touchscreen, a gpio block and an ADC, reshape the probing to
isolate what is truly input/touchscreen specific from the remaining
part.
This is only code shuffling, there is no functional change.
---
Acked-by: Charles Keepax <***@opensource.wolfsonmicro.com>

Thanks,
Charles
Robert Jarzmik
2017-06-30 19:44:03 UTC
Permalink
This adds support for the new AC97 bus code, which discovers the devices
rather than uses platform data.

As part of this discovery, it enables a multi-function device wm97xx,
which supports touchscreen, battery, ADC and an audio codec. This patch
adds the code to bind the touchscreen "cell" as the touchscreen driver.

This was tested on the pxa architecture with a pxa270 + wm9713 + the
mioa701 touchscreen.

Signed-off-by: Robert Jarzmik <***@free.fr>
Acked-by: Charles Keepax <***@opensource.wolfsonmicro.com>
Acked-by: Dmitry Torokhov <***@gmail.com>
---
drivers/input/touchscreen/Kconfig | 2 +-
drivers/input/touchscreen/wm97xx-core.c | 56 ++++++++++++++++++++++++++++++++-
2 files changed, 56 insertions(+), 2 deletions(-)

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 033599777651..22257f3e1059 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -725,7 +725,7 @@ config TOUCHSCREEN_WM831X

config TOUCHSCREEN_WM97XX
tristate "Support for WM97xx AC97 touchscreen controllers"
- depends on AC97_BUS
+ depends on AC97_BUS || AC97_BUS_NEW
help
Say Y here if you have a Wolfson Microelectronics WM97xx
touchscreen connected to your system. Note that this option
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index 39869ffdc4fa..fd714ee881f7 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -44,6 +44,7 @@
#include <linux/pm.h>
#include <linux/interrupt.h>
#include <linux/bitops.h>
+#include <linux/mfd/wm97xx.h>
#include <linux/workqueue.h>
#include <linux/wm97xx.h>
#include <linux/uaccess.h>
@@ -766,6 +767,39 @@ static int wm97xx_remove(struct device *dev)
return 0;
}

+static int wm97xx_mfd_probe(struct platform_device *pdev)
+{
+ struct wm97xx *wm;
+ struct wm97xx_platform_data *mfd_pdata = dev_get_platdata(&pdev->dev);
+ int ret;
+
+ wm = devm_kzalloc(&pdev->dev, sizeof(struct wm97xx), GFP_KERNEL);
+ if (!wm)
+ return -ENOMEM;
+
+ wm->dev = &pdev->dev;
+ wm->ac97 = mfd_pdata->ac97;
+
+ ret = _wm97xx_probe(wm);
+ if (ret)
+ return ret;
+
+ ret = wm97xx_add_battery(wm, mfd_pdata->batt_pdata);
+ if (ret < 0)
+ goto batt_err;
+
+ return ret;
+
+batt_err:
+ wm97xx_unregister_touch(wm);
+ return ret;
+}
+
+static int wm97xx_mfd_remove(struct platform_device *pdev)
+{
+ return wm97xx_remove(&pdev->dev);
+}
+
static int __maybe_unused wm97xx_suspend(struct device *dev)
{
struct wm97xx *wm = dev_get_drvdata(dev);
@@ -862,21 +896,41 @@ EXPORT_SYMBOL_GPL(wm97xx_unregister_mach_ops);

static struct device_driver wm97xx_driver = {
.name = "wm97xx-ts",
+#ifdef CONFIG_AC97_BUS
.bus = &ac97_bus_type,
+#endif
.owner = THIS_MODULE,
.probe = wm97xx_probe,
.remove = wm97xx_remove,
.pm = &wm97xx_pm_ops,
};

+static struct platform_driver wm97xx_mfd_driver = {
+ .driver = {
+ .name = "wm97xx-ts",
+ .pm = &wm97xx_pm_ops,
+ },
+ .probe = wm97xx_mfd_probe,
+ .remove = wm97xx_mfd_remove,
+};
+
static int __init wm97xx_init(void)
{
- return driver_register(&wm97xx_driver);
+ int ret;
+
+ ret = platform_driver_register(&wm97xx_mfd_driver);
+ if (ret)
+ return ret;
+
+ if (IS_BUILTIN(CONFIG_AC97_BUS))
+ ret = driver_register(&wm97xx_driver);
+ return ret;
}

static void __exit wm97xx_exit(void)
{
driver_unregister(&wm97xx_driver);
+ platform_driver_unregister(&wm97xx_mfd_driver);
}

module_init(wm97xx_init);
--
2.11.0
Robert Jarzmik
2017-06-30 19:44:00 UTC
Permalink
All pxa library functions don't use the input parameters for nothing but
slot number. This simplifies their prototypes, and makes them usable by
both the legacy ac97 bus and the new ac97 bus.

Signed-off-by: Robert Jarzmik <***@free.fr>
---
include/sound/pxa2xx-lib.h | 15 +++++++++------
sound/arm/pxa2xx-ac97-lib.c | 37 +++++++++++++++++++++----------------
sound/arm/pxa2xx-ac97.c | 35 +++++++++++++++++++++++++++--------
sound/soc/pxa/pxa2xx-ac97.c | 32 ++++++++++++++++++++++++++------
4 files changed, 83 insertions(+), 36 deletions(-)

diff --git a/include/sound/pxa2xx-lib.h b/include/sound/pxa2xx-lib.h
index 6ef629bde164..85352becec7c 100644
--- a/include/sound/pxa2xx-lib.h
+++ b/include/sound/pxa2xx-lib.h
@@ -1,10 +1,13 @@
#ifndef PXA2XX_LIB_H
#define PXA2XX_LIB_H

+#include <uapi/sound/asound.h>
#include <linux/platform_device.h>
-#include <sound/ac97_codec.h>

/* PCM */
+struct snd_pcm_substream;
+struct snd_pcm_hw_params;
+struct snd_pcm;

extern int __pxa2xx_pcm_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params);
@@ -21,12 +24,12 @@ extern void pxa2xx_pcm_free_dma_buffers(struct snd_pcm *pcm);

/* AC97 */

-extern unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97, unsigned short reg);
-extern void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg, unsigned short val);
+extern int pxa2xx_ac97_read(int slot, unsigned short reg);
+extern int pxa2xx_ac97_write(int slot, unsigned short reg, unsigned short val);

-extern bool pxa2xx_ac97_try_warm_reset(struct snd_ac97 *ac97);
-extern bool pxa2xx_ac97_try_cold_reset(struct snd_ac97 *ac97);
-extern void pxa2xx_ac97_finish_reset(struct snd_ac97 *ac97);
+extern bool pxa2xx_ac97_try_warm_reset(void);
+extern bool pxa2xx_ac97_try_cold_reset(void);
+extern void pxa2xx_ac97_finish_reset(void);

extern int pxa2xx_ac97_hw_suspend(void);
extern int pxa2xx_ac97_hw_resume(void);
diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c
index 39c3969ac1c7..5950a9e218d9 100644
--- a/sound/arm/pxa2xx-ac97-lib.c
+++ b/sound/arm/pxa2xx-ac97-lib.c
@@ -20,7 +20,6 @@
#include <linux/io.h>
#include <linux/gpio.h>

-#include <sound/ac97_codec.h>
#include <sound/pxa2xx-lib.h>

#include <mach/irqs.h>
@@ -46,38 +45,41 @@ extern void pxa27x_configure_ac97reset(int reset_gpio, bool to_gpio);
* 1 jiffy timeout if interrupt never comes).
*/

-unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97, unsigned short reg)
+int pxa2xx_ac97_read(int slot, unsigned short reg)
{
- unsigned short val = -1;
+ int val = -ENODEV;
volatile u32 *reg_addr;

+ if (slot > 0)
+ return -ENODEV;
+
mutex_lock(&car_mutex);

/* set up primary or secondary codec space */
if (cpu_is_pxa25x() && reg == AC97_GPIO_STATUS)
- reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE;
+ reg_addr = slot ? &SMC_REG_BASE : &PMC_REG_BASE;
else
- reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
+ reg_addr = slot ? &SAC_REG_BASE : &PAC_REG_BASE;
reg_addr += (reg >> 1);

/* start read access across the ac97 link */
GSR = GSR_CDONE | GSR_SDONE;
gsr_bits = 0;
- val = *reg_addr;
+ val = (*reg_addr & 0xffff);
if (reg == AC97_GPIO_STATUS)
goto out;
if (wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1) <= 0 &&
!((GSR | gsr_bits) & GSR_SDONE)) {
printk(KERN_ERR "%s: read error (ac97_reg=%d GSR=%#lx)\n",
__func__, reg, GSR | gsr_bits);
- val = -1;
+ val = -ETIMEDOUT;
goto out;
}

/* valid data now */
GSR = GSR_CDONE | GSR_SDONE;
gsr_bits = 0;
- val = *reg_addr;
+ val = (*reg_addr & 0xffff);
/* but we've just started another cycle... */
wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1);

@@ -86,29 +88,32 @@ out: mutex_unlock(&car_mutex);
}
EXPORT_SYMBOL_GPL(pxa2xx_ac97_read);

-void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
- unsigned short val)
+int pxa2xx_ac97_write(int slot, unsigned short reg, unsigned short val)
{
volatile u32 *reg_addr;
+ int ret = 0;

mutex_lock(&car_mutex);

/* set up primary or secondary codec space */
if (cpu_is_pxa25x() && reg == AC97_GPIO_STATUS)
- reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE;
+ reg_addr = slot ? &SMC_REG_BASE : &PMC_REG_BASE;
else
- reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
+ reg_addr = slot ? &SAC_REG_BASE : &PAC_REG_BASE;
reg_addr += (reg >> 1);

GSR = GSR_CDONE | GSR_SDONE;
gsr_bits = 0;
*reg_addr = val;
if (wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_CDONE, 1) <= 0 &&
- !((GSR | gsr_bits) & GSR_CDONE))
+ !((GSR | gsr_bits) & GSR_CDONE)) {
printk(KERN_ERR "%s: write error (ac97_reg=%d GSR=%#lx)\n",
__func__, reg, GSR | gsr_bits);
+ ret = -EIO;
+ }

mutex_unlock(&car_mutex);
+ return ret;
}
EXPORT_SYMBOL_GPL(pxa2xx_ac97_write);

@@ -188,7 +193,7 @@ static inline void pxa_ac97_cold_pxa3xx(void)
}
#endif

-bool pxa2xx_ac97_try_warm_reset(struct snd_ac97 *ac97)
+bool pxa2xx_ac97_try_warm_reset(void)
{
unsigned long gsr;
unsigned int timeout = 100;
@@ -225,7 +230,7 @@ bool pxa2xx_ac97_try_warm_reset(struct snd_ac97 *ac97)
}
EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_warm_reset);

-bool pxa2xx_ac97_try_cold_reset(struct snd_ac97 *ac97)
+bool pxa2xx_ac97_try_cold_reset(void)
{
unsigned long gsr;
unsigned int timeout = 1000;
@@ -263,7 +268,7 @@ bool pxa2xx_ac97_try_cold_reset(struct snd_ac97 *ac97)
EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_cold_reset);


-void pxa2xx_ac97_finish_reset(struct snd_ac97 *ac97)
+void pxa2xx_ac97_finish_reset(void)
{
GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
GCR |= GCR_SDONE_IE|GCR_CDONE_IE;
diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
index fbd5dad0c484..4bc244c40f80 100644
--- a/sound/arm/pxa2xx-ac97.c
+++ b/sound/arm/pxa2xx-ac97.c
@@ -29,19 +29,38 @@

#include "pxa2xx-pcm.h"

-static void pxa2xx_ac97_reset(struct snd_ac97 *ac97)
+static void pxa2xx_ac97_legacy_reset(struct snd_ac97 *ac97)
{
- if (!pxa2xx_ac97_try_cold_reset(ac97)) {
- pxa2xx_ac97_try_warm_reset(ac97);
- }
+ if (!pxa2xx_ac97_try_cold_reset())
+ pxa2xx_ac97_try_warm_reset();
+
+ pxa2xx_ac97_finish_reset();
+}
+
+static unsigned short pxa2xx_ac97_legacy_read(struct snd_ac97 *ac97,
+ unsigned short reg)
+{
+ int ret;
+
+ ret = pxa2xx_ac97_read(ac97->num, reg);
+ if (ret < 0)
+ return 0;
+ else
+ return (unsigned short)(ret & 0xffff);
+}
+
+static void pxa2xx_ac97_legacy_write(struct snd_ac97 *ac97,
+ unsigned short reg, unsigned short val)
+{
+ int __always_unused ret;

- pxa2xx_ac97_finish_reset(ac97);
+ ret = pxa2xx_ac97_write(ac97->num, reg, val);
}

static struct snd_ac97_bus_ops pxa2xx_ac97_ops = {
- .read = pxa2xx_ac97_read,
- .write = pxa2xx_ac97_write,
- .reset = pxa2xx_ac97_reset,
+ .read = pxa2xx_ac97_legacy_read,
+ .write = pxa2xx_ac97_legacy_write,
+ .reset = pxa2xx_ac97_legacy_reset,
};

static struct pxad_param pxa2xx_ac97_pcm_out_req = {
diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
index 2e2fb1838ec2..b07d64ef49ba 100644
--- a/sound/soc/pxa/pxa2xx-ac97.c
+++ b/sound/soc/pxa/pxa2xx-ac97.c
@@ -29,21 +29,41 @@

static void pxa2xx_ac97_warm_reset(struct snd_ac97 *ac97)
{
- pxa2xx_ac97_try_warm_reset(ac97);
+ pxa2xx_ac97_try_warm_reset();

- pxa2xx_ac97_finish_reset(ac97);
+ pxa2xx_ac97_finish_reset();
}

static void pxa2xx_ac97_cold_reset(struct snd_ac97 *ac97)
{
- pxa2xx_ac97_try_cold_reset(ac97);
+ pxa2xx_ac97_try_cold_reset();

- pxa2xx_ac97_finish_reset(ac97);
+ pxa2xx_ac97_finish_reset();
+}
+
+static unsigned short pxa2xx_ac97_legacy_read(struct snd_ac97 *ac97,
+ unsigned short reg)
+{
+ int ret;
+
+ ret = pxa2xx_ac97_read(ac97->num, reg);
+ if (ret < 0)
+ return 0;
+ else
+ return (unsigned short)(ret & 0xffff);
+}
+
+static void pxa2xx_ac97_legacy_write(struct snd_ac97 *ac97,
+ unsigned short reg, unsigned short val)
+{
+ int ret;
+
+ ret = pxa2xx_ac97_write(ac97->num, reg, val);
}

static struct snd_ac97_bus_ops pxa2xx_ac97_ops = {
- .read = pxa2xx_ac97_read,
- .write = pxa2xx_ac97_write,
+ .read = pxa2xx_ac97_legacy_read,
+ .write = pxa2xx_ac97_legacy_write,
.warm_reset = pxa2xx_ac97_warm_reset,
.reset = pxa2xx_ac97_cold_reset,
};
--
2.11.0
Robert Jarzmik
2017-06-30 19:44:02 UTC
Permalink
The WM9705, WM9712 and WM9713 are highly integrated codecs, with an
audio codec, DAC and ADC, GPIO unit and a touchscreen interface.

Historically the support was spread across drivers/input/touchscreen and
sound/soc/codecs. The sharing was done through ac97 bus sharing. This
model will not withstand the new AC97 bus model, where codecs are
discovered on runtime.

Signed-off-by: Robert Jarzmik <***@free.fr>
---
drivers/mfd/Kconfig | 14 +++
drivers/mfd/Makefile | 1 +
drivers/mfd/wm97xx-core.c | 282 +++++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/wm97xx.h | 31 +++++
4 files changed, 328 insertions(+)
create mode 100644 drivers/mfd/wm97xx-core.c
create mode 100644 include/linux/mfd/wm97xx.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 55ecdfb74d31..440677bac5c9 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1628,6 +1628,20 @@ config MFD_WM8994
core support for the WM8994, in order to use the actual
functionaltiy of the device other drivers must be enabled.

+config MFD_WM97xx
+ tristate "Wolfson Microelectronics WM97xx"
+ select MFD_CORE
+ select REGMAP_AC97
+ select AC97_BUS_COMPAT if AC97_BUS_NEW
+ help
+
+ The WM9705, WM9712 and WM9713 is a highly integrated hi-fi CODEC
+ designed for smartphone applications. As well as audio functionality
+ it has on board GPIO and a touchscreen functionality which is
+ supported via the relevant subsystems. This driver provides core
+ support for the WM97xx, in order to use the actual functionaltiy of
+ the device other drivers must be enabled.
+
config MFD_STW481X
tristate "Support for ST Microelectronics STw481x"
depends on I2C && (ARCH_NOMADIK || COMPILE_TEST)
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 31ce07611a6f..902c2e46f310 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -69,6 +69,7 @@ obj-$(CONFIG_MFD_WM8350) += wm8350.o
obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o
wm8994-objs := wm8994-core.o wm8994-irq.o wm8994-regmap.o
obj-$(CONFIG_MFD_WM8994) += wm8994.o
+obj-$(CONFIG_MFD_WM97xx) += wm97xx-core.o

obj-$(CONFIG_TPS6105X) += tps6105x.o
obj-$(CONFIG_TPS65010) += tps65010.o
diff --git a/drivers/mfd/wm97xx-core.c b/drivers/mfd/wm97xx-core.c
new file mode 100644
index 000000000000..0813fc9fa8ed
--- /dev/null
+++ b/drivers/mfd/wm97xx-core.c
@@ -0,0 +1,282 @@
+/*
+ * Wolfson WM97xx -- Core device
+ *
+ * Copyright (C) 2016 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Features:
+ * - an AC97 audio codec
+ * - a touchscreen driver
+ * - a GPIO block
+ */
+
+#include <linux/module.h>
+
+#include <linux/device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/wm97xx.h>
+#include <linux/wm97xx.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <sound/ac97/codec.h>
+#include <sound/ac97/compat.h>
+
+#define WM9705_VENDOR_ID 0x574d4c05
+#define WM9712_VENDOR_ID 0x574d4c12
+#define WM9713_VENDOR_ID 0x574d4c13
+#define WM97xx_VENDOR_ID_MASK 0xffffffff
+
+struct wm97xx_priv {
+ struct regmap *regmap;
+ struct snd_ac97 *ac97;
+ struct device *dev;
+};
+
+static bool wm97xx_readable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case AC97_RESET ... AC97_PCM_SURR_DAC_RATE:
+ case AC97_PCM_LR_ADC_RATE:
+ case AC97_CENTER_LFE_MASTER:
+ case AC97_SPDIF ... AC97_LINE1_LEVEL:
+ case AC97_GPIO_CFG ... 0x5c:
+ case AC97_CODEC_CLASS_REV ... AC97_PCI_SID:
+ case 0x74 ... AC97_VENDOR_ID2:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool wm97xx_writeable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case AC97_VENDOR_ID1:
+ case AC97_VENDOR_ID2:
+ return false;
+ default:
+ return wm97xx_readable_reg(dev, reg);
+ }
+}
+
+static const struct reg_default wm97xx_reg_defaults[] = {
+};
+
+static const struct regmap_config wm9705_regmap_config = {
+ .reg_bits = 16,
+ .reg_stride = 2,
+ .val_bits = 16,
+ .max_register = 0x7e,
+ .cache_type = REGCACHE_RBTREE,
+
+ .reg_defaults = wm97xx_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(wm97xx_reg_defaults),
+ .volatile_reg = regmap_ac97_default_volatile,
+ .readable_reg = wm97xx_readable_reg,
+ .writeable_reg = wm97xx_writeable_reg,
+};
+
+static const struct regmap_config wm9712_regmap_config = {
+ .reg_bits = 16,
+ .reg_stride = 2,
+ .val_bits = 16,
+ .max_register = 0x7e,
+ .cache_type = REGCACHE_RBTREE,
+
+ .reg_defaults = wm97xx_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(wm97xx_reg_defaults),
+ .volatile_reg = regmap_ac97_default_volatile,
+ .readable_reg = wm97xx_readable_reg,
+ .writeable_reg = wm97xx_writeable_reg,
+};
+
+static int wm9705_register(struct wm97xx_priv *wm97xx)
+{
+ return 0;
+}
+
+static int wm9712_register(struct wm97xx_priv *wm97xx)
+{
+ return 0;
+}
+
+static const struct reg_default wm9713_reg_defaults[] = {
+ { 0x02, 0x8080 }, /* Speaker Output Volume */
+ { 0x04, 0x8080 }, /* Headphone Output Volume */
+ { 0x06, 0x8080 }, /* Out3/OUT4 Volume */
+ { 0x08, 0xc880 }, /* Mono Volume */
+ { 0x0a, 0xe808 }, /* LINEIN Volume */
+ { 0x0c, 0xe808 }, /* DAC PGA Volume */
+ { 0x0e, 0x0808 }, /* MIC PGA Volume */
+ { 0x10, 0x00da }, /* MIC Routing Control */
+ { 0x12, 0x8000 }, /* Record PGA Volume */
+ { 0x14, 0xd600 }, /* Record Routing */
+ { 0x16, 0xaaa0 }, /* PCBEEP Volume */
+ { 0x18, 0xaaa0 }, /* VxDAC Volume */
+ { 0x1a, 0xaaa0 }, /* AUXDAC Volume */
+ { 0x1c, 0x0000 }, /* Output PGA Mux */
+ { 0x1e, 0x0000 }, /* DAC 3D control */
+ { 0x20, 0x0f0f }, /* DAC Tone Control*/
+ { 0x22, 0x0040 }, /* MIC Input Select & Bias */
+ { 0x24, 0x0000 }, /* Output Volume Mapping & Jack */
+ { 0x26, 0x7f00 }, /* Powerdown Ctrl/Stat*/
+ { 0x28, 0x0405 }, /* Extended Audio ID */
+ { 0x2a, 0x0410 }, /* Extended Audio Start/Ctrl */
+ { 0x2c, 0xbb80 }, /* Audio DACs Sample Rate */
+ { 0x2e, 0xbb80 }, /* AUXDAC Sample Rate */
+ { 0x32, 0xbb80 }, /* Audio ADCs Sample Rate */
+ { 0x36, 0x4523 }, /* PCM codec control */
+ { 0x3a, 0x2000 }, /* SPDIF control */
+ { 0x3c, 0xfdff }, /* Powerdown 1 */
+ { 0x3e, 0xffff }, /* Powerdown 2 */
+ { 0x40, 0x0000 }, /* General Purpose */
+ { 0x42, 0x0000 }, /* Fast Power-Up Control */
+ { 0x44, 0x0080 }, /* MCLK/PLL Control */
+ { 0x46, 0x0000 }, /* MCLK/PLL Control */
+
+ { 0x4c, 0xfffe }, /* GPIO Pin Configuration */
+ { 0x4e, 0xffff }, /* GPIO Pin Polarity / Type */
+ { 0x50, 0x0000 }, /* GPIO Pin Sticky */
+ { 0x52, 0x0000 }, /* GPIO Pin Wake-Up */
+ /* GPIO Pin Status */
+ { 0x56, 0xfffe }, /* GPIO Pin Sharing */
+ { 0x58, 0x4000 }, /* GPIO PullUp/PullDown */
+ { 0x5a, 0x0000 }, /* Additional Functions 1 */
+ { 0x5c, 0x0000 }, /* Additional Functions 2 */
+ { 0x60, 0xb032 }, /* ALC Control */
+ { 0x62, 0x3e00 }, /* ALC / Noise Gate Control */
+ { 0x64, 0x0000 }, /* AUXDAC input control */
+ { 0x74, 0x0000 }, /* Digitiser Reg 1 */
+ { 0x76, 0x0006 }, /* Digitiser Reg 2 */
+ { 0x78, 0x0001 }, /* Digitiser Reg 3 */
+ { 0x7a, 0x0000 }, /* Digitiser Read Back */
+};
+
+static const struct regmap_config wm9713_regmap_config = {
+ .reg_bits = 16,
+ .reg_stride = 2,
+ .val_bits = 16,
+ .max_register = 0x7e,
+ .cache_type = REGCACHE_RBTREE,
+
+ .reg_defaults = wm9713_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(wm9713_reg_defaults),
+ .volatile_reg = regmap_ac97_default_volatile,
+ .readable_reg = wm97xx_readable_reg,
+ .writeable_reg = wm97xx_writeable_reg,
+};
+
+static int wm9713_register(struct wm97xx_priv *wm97xx,
+ struct wm97xx_pdata *pdata)
+{
+ static struct wm97xx_platform_data codec_pdata;
+ static const struct mfd_cell cells[] = {
+ {
+ .name = "wm9713-codec",
+ .platform_data = &codec_pdata,
+ .pdata_size = sizeof(codec_pdata),
+ },
+ {
+ .name = "wm97xx-ts",
+ .platform_data = &codec_pdata,
+ .pdata_size = sizeof(codec_pdata),
+ },
+ };
+
+ codec_pdata.ac97 = wm97xx->ac97;
+ codec_pdata.regmap = devm_regmap_init_ac97(wm97xx->ac97,
+ &wm9713_regmap_config);
+ codec_pdata.batt_pdata = pdata->batt_pdata;
+ if (IS_ERR(codec_pdata.regmap))
+ return PTR_ERR(codec_pdata.regmap);
+
+ return devm_mfd_add_devices(wm97xx->dev, -1, cells,
+ ARRAY_SIZE(cells), NULL, 0, NULL);
+}
+
+static int wm97xx_ac97_probe(struct ac97_codec_device *adev)
+{
+ struct wm97xx_priv *wm97xx;
+ int ret;
+ void *pdata = snd_ac97_codec_get_platdata(adev);
+
+ wm97xx = devm_kzalloc(ac97_codec_dev2dev(adev),
+ sizeof(*wm97xx), GFP_KERNEL);
+ if (!wm97xx)
+ return -ENOMEM;
+
+ wm97xx->dev = ac97_codec_dev2dev(adev);
+ wm97xx->ac97 = snd_ac97_compat_alloc(adev);
+ if (IS_ERR(wm97xx->ac97))
+ return PTR_ERR(wm97xx->ac97);
+
+
+ ac97_set_drvdata(adev, wm97xx);
+ dev_info(wm97xx->dev, "wm97xx core found, id=0x%x\n",
+ adev->vendor_id);
+
+ switch (adev->vendor_id) {
+ case WM9705_VENDOR_ID:
+ ret = wm9705_register(wm97xx);
+ break;
+ case WM9712_VENDOR_ID:
+ ret = wm9712_register(wm97xx);
+ break;
+ case WM9713_VENDOR_ID:
+ ret = wm9713_register(wm97xx, pdata);
+ break;
+ default:
+ ret = -ENODEV;
+ }
+
+ if (ret)
+ snd_ac97_compat_release(wm97xx->ac97);
+
+ return ret;
+}
+
+static int wm97xx_ac97_remove(struct ac97_codec_device *adev)
+{
+ struct wm97xx_priv *wm97xx = ac97_get_drvdata(adev);
+
+ snd_ac97_compat_release(wm97xx->ac97);
+
+ return 0;
+}
+
+static const struct ac97_id wm97xx_ac97_ids[] = {
+ { .id = WM9705_VENDOR_ID, .mask = WM97xx_VENDOR_ID_MASK },
+ { .id = WM9712_VENDOR_ID, .mask = WM97xx_VENDOR_ID_MASK },
+ { .id = WM9713_VENDOR_ID, .mask = WM97xx_VENDOR_ID_MASK },
+ { }
+};
+
+static struct ac97_codec_driver wm97xx_ac97_driver = {
+ .driver = {
+ .name = "wm97xx-core",
+ },
+ .probe = wm97xx_ac97_probe,
+ .remove = wm97xx_ac97_remove,
+ .id_table = wm97xx_ac97_ids,
+};
+
+static int __init wm97xx_module_init(void)
+{
+ return snd_ac97_codec_driver_register(&wm97xx_ac97_driver);
+}
+module_init(wm97xx_module_init);
+
+static void __exit wm97xx_module_exit(void)
+{
+ snd_ac97_codec_driver_unregister(&wm97xx_ac97_driver);
+}
+module_exit(wm97xx_module_exit);
+
+MODULE_DESCRIPTION("WM9712, WM9713 core driver");
+MODULE_AUTHOR("Robert Jarzmik <***@free.fr>");
+MODULE_LICENSE("GPL");
+
diff --git a/include/linux/mfd/wm97xx.h b/include/linux/mfd/wm97xx.h
new file mode 100644
index 000000000000..627322f14d48
--- /dev/null
+++ b/include/linux/mfd/wm97xx.h
@@ -0,0 +1,31 @@
+/*
+ * wm97xx client interface
+ *
+ * Copyright (C) 2016 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_MFD_WM97XX_H
+#define __LINUX_MFD_WM97XX_H
+
+struct regmap;
+struct wm97xx_batt_pdata;
+struct snd_ac97;
+
+struct wm97xx_platform_data {
+ struct snd_ac97 *ac97;
+ struct regmap *regmap;
+ struct wm97xx_batt_pdata *batt_pdata;
+};
+
+
+#endif
--
2.11.0
Charles Keepax
2017-07-03 09:08:40 UTC
Permalink
Post by Robert Jarzmik
The WM9705, WM9712 and WM9713 are highly integrated codecs, with an
audio codec, DAC and ADC, GPIO unit and a touchscreen interface.
Historically the support was spread across drivers/input/touchscreen and
sound/soc/codecs. The sharing was done through ac97 bus sharing. This
model will not withstand the new AC97 bus model, where codecs are
discovered on runtime.
---
drivers/mfd/Kconfig | 14 +++
drivers/mfd/Makefile | 1 +
drivers/mfd/wm97xx-core.c | 282 +++++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/wm97xx.h | 31 +++++
4 files changed, 328 insertions(+)
create mode 100644 drivers/mfd/wm97xx-core.c
create mode 100644 include/linux/mfd/wm97xx.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 55ecdfb74d31..440677bac5c9 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1628,6 +1628,20 @@ config MFD_WM8994
core support for the WM8994, in order to use the actual
functionaltiy of the device other drivers must be enabled.
+config MFD_WM97xx
+ tristate "Wolfson Microelectronics WM97xx"
+ select MFD_CORE
+ select REGMAP_AC97
+ select AC97_BUS_COMPAT if AC97_BUS_NEW
+ help
+
+ The WM9705, WM9712 and WM9713 is a highly integrated hi-fi CODEC
+ designed for smartphone applications. As well as audio functionality
+ it has on board GPIO and a touchscreen functionality which is
+ supported via the relevant subsystems. This driver provides core
+ support for the WM97xx, in order to use the actual functionaltiy of
+ the device other drivers must be enabled.
+
config MFD_STW481X
tristate "Support for ST Microelectronics STw481x"
depends on I2C && (ARCH_NOMADIK || COMPILE_TEST)
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 31ce07611a6f..902c2e46f310 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -69,6 +69,7 @@ obj-$(CONFIG_MFD_WM8350) += wm8350.o
obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o
wm8994-objs := wm8994-core.o wm8994-irq.o wm8994-regmap.o
obj-$(CONFIG_MFD_WM8994) += wm8994.o
+obj-$(CONFIG_MFD_WM97xx) += wm97xx-core.o
obj-$(CONFIG_TPS6105X) += tps6105x.o
obj-$(CONFIG_TPS65010) += tps65010.o
diff --git a/drivers/mfd/wm97xx-core.c b/drivers/mfd/wm97xx-core.c
new file mode 100644
index 000000000000..0813fc9fa8ed
--- /dev/null
+++ b/drivers/mfd/wm97xx-core.c
@@ -0,0 +1,282 @@
+/*
+ * Wolfson WM97xx -- Core device
+ *
+ * Copyright (C) 2016 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * - an AC97 audio codec
+ * - a touchscreen driver
+ * - a GPIO block
+ */
+
+#include <linux/module.h>
+
+#include <linux/device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/wm97xx.h>
+#include <linux/wm97xx.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <sound/ac97/codec.h>
+#include <sound/ac97/compat.h>
+
+#define WM9705_VENDOR_ID 0x574d4c05
+#define WM9712_VENDOR_ID 0x574d4c12
+#define WM9713_VENDOR_ID 0x574d4c13
+#define WM97xx_VENDOR_ID_MASK 0xffffffff
+
+struct wm97xx_priv {
+ struct regmap *regmap;
+ struct snd_ac97 *ac97;
+ struct device *dev;
+};
+
+static bool wm97xx_readable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ return true;
+ return false;
+ }
+}
+
+static bool wm97xx_writeable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ return false;
+ return wm97xx_readable_reg(dev, reg);
+ }
+}
+
+static const struct reg_default wm97xx_reg_defaults[] = {
+};
Should we not have some defaults in here?
Post by Robert Jarzmik
+
+static const struct regmap_config wm9705_regmap_config = {
+ .reg_bits = 16,
+ .reg_stride = 2,
+ .val_bits = 16,
+ .max_register = 0x7e,
+ .cache_type = REGCACHE_RBTREE,
+
+ .reg_defaults = wm97xx_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(wm97xx_reg_defaults),
+ .volatile_reg = regmap_ac97_default_volatile,
+ .readable_reg = wm97xx_readable_reg,
+ .writeable_reg = wm97xx_writeable_reg,
+};
+
+static const struct regmap_config wm9712_regmap_config = {
+ .reg_bits = 16,
+ .reg_stride = 2,
+ .val_bits = 16,
+ .max_register = 0x7e,
+ .cache_type = REGCACHE_RBTREE,
+
+ .reg_defaults = wm97xx_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(wm97xx_reg_defaults),
+ .volatile_reg = regmap_ac97_default_volatile,
+ .readable_reg = wm97xx_readable_reg,
+ .writeable_reg = wm97xx_writeable_reg,
+};
+
+static int wm9705_register(struct wm97xx_priv *wm97xx)
+{
+ return 0;
+}
+
+static int wm9712_register(struct wm97xx_priv *wm97xx)
+{
+ return 0;
+}
+
So are we only adding stubs for the 9705 and 9712? If so we
should probably make that clear in the commit message at least.
Post by Robert Jarzmik
+static const struct reg_default wm9713_reg_defaults[] = {
+ { 0x02, 0x8080 }, /* Speaker Output Volume */
+ { 0x04, 0x8080 }, /* Headphone Output Volume */
+ { 0x06, 0x8080 }, /* Out3/OUT4 Volume */
+ { 0x08, 0xc880 }, /* Mono Volume */
+ { 0x0a, 0xe808 }, /* LINEIN Volume */
+ { 0x0c, 0xe808 }, /* DAC PGA Volume */
+ { 0x0e, 0x0808 }, /* MIC PGA Volume */
+ { 0x10, 0x00da }, /* MIC Routing Control */
+ { 0x12, 0x8000 }, /* Record PGA Volume */
+ { 0x14, 0xd600 }, /* Record Routing */
+ { 0x16, 0xaaa0 }, /* PCBEEP Volume */
+ { 0x18, 0xaaa0 }, /* VxDAC Volume */
+ { 0x1a, 0xaaa0 }, /* AUXDAC Volume */
+ { 0x1c, 0x0000 }, /* Output PGA Mux */
+ { 0x1e, 0x0000 }, /* DAC 3D control */
+ { 0x20, 0x0f0f }, /* DAC Tone Control*/
+ { 0x22, 0x0040 }, /* MIC Input Select & Bias */
+ { 0x24, 0x0000 }, /* Output Volume Mapping & Jack */
+ { 0x26, 0x7f00 }, /* Powerdown Ctrl/Stat*/
+ { 0x28, 0x0405 }, /* Extended Audio ID */
+ { 0x2a, 0x0410 }, /* Extended Audio Start/Ctrl */
+ { 0x2c, 0xbb80 }, /* Audio DACs Sample Rate */
+ { 0x2e, 0xbb80 }, /* AUXDAC Sample Rate */
+ { 0x32, 0xbb80 }, /* Audio ADCs Sample Rate */
+ { 0x36, 0x4523 }, /* PCM codec control */
+ { 0x3a, 0x2000 }, /* SPDIF control */
+ { 0x3c, 0xfdff }, /* Powerdown 1 */
+ { 0x3e, 0xffff }, /* Powerdown 2 */
+ { 0x40, 0x0000 }, /* General Purpose */
+ { 0x42, 0x0000 }, /* Fast Power-Up Control */
+ { 0x44, 0x0080 }, /* MCLK/PLL Control */
+ { 0x46, 0x0000 }, /* MCLK/PLL Control */
+
+ { 0x4c, 0xfffe }, /* GPIO Pin Configuration */
+ { 0x4e, 0xffff }, /* GPIO Pin Polarity / Type */
+ { 0x50, 0x0000 }, /* GPIO Pin Sticky */
+ { 0x52, 0x0000 }, /* GPIO Pin Wake-Up */
+ /* GPIO Pin Status */
+ { 0x56, 0xfffe }, /* GPIO Pin Sharing */
+ { 0x58, 0x4000 }, /* GPIO PullUp/PullDown */
+ { 0x5a, 0x0000 }, /* Additional Functions 1 */
+ { 0x5c, 0x0000 }, /* Additional Functions 2 */
+ { 0x60, 0xb032 }, /* ALC Control */
+ { 0x62, 0x3e00 }, /* ALC / Noise Gate Control */
+ { 0x64, 0x0000 }, /* AUXDAC input control */
+ { 0x74, 0x0000 }, /* Digitiser Reg 1 */
+ { 0x76, 0x0006 }, /* Digitiser Reg 2 */
+ { 0x78, 0x0001 }, /* Digitiser Reg 3 */
+ { 0x7a, 0x0000 }, /* Digitiser Read Back */
+};
+
+static const struct regmap_config wm9713_regmap_config = {
+ .reg_bits = 16,
+ .reg_stride = 2,
+ .val_bits = 16,
+ .max_register = 0x7e,
+ .cache_type = REGCACHE_RBTREE,
+
+ .reg_defaults = wm9713_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(wm9713_reg_defaults),
+ .volatile_reg = regmap_ac97_default_volatile,
+ .readable_reg = wm97xx_readable_reg,
+ .writeable_reg = wm97xx_writeable_reg,
+};
+
+static int wm9713_register(struct wm97xx_priv *wm97xx,
+ struct wm97xx_pdata *pdata)
+{
+ static struct wm97xx_platform_data codec_pdata;
+ static const struct mfd_cell cells[] = {
+ {
+ .name = "wm9713-codec",
+ .platform_data = &codec_pdata,
+ .pdata_size = sizeof(codec_pdata),
+ },
+ {
+ .name = "wm97xx-ts",
+ .platform_data = &codec_pdata,
+ .pdata_size = sizeof(codec_pdata),
+ },
+ };
+
+ codec_pdata.ac97 = wm97xx->ac97;
+ codec_pdata.regmap = devm_regmap_init_ac97(wm97xx->ac97,
+ &wm9713_regmap_config);
+ codec_pdata.batt_pdata = pdata->batt_pdata;
+ if (IS_ERR(codec_pdata.regmap))
+ return PTR_ERR(codec_pdata.regmap);
+
+ return devm_mfd_add_devices(wm97xx->dev, -1, cells,
Should probably use the define PLATFORM_DEVID_NONE here.
Post by Robert Jarzmik
+ ARRAY_SIZE(cells), NULL, 0, NULL);
+}
+
+static int wm97xx_ac97_probe(struct ac97_codec_device *adev)
+{
+ struct wm97xx_priv *wm97xx;
+ int ret;
+ void *pdata = snd_ac97_codec_get_platdata(adev);
+
+ wm97xx = devm_kzalloc(ac97_codec_dev2dev(adev),
+ sizeof(*wm97xx), GFP_KERNEL);
+ if (!wm97xx)
+ return -ENOMEM;
+
+ wm97xx->dev = ac97_codec_dev2dev(adev);
+ wm97xx->ac97 = snd_ac97_compat_alloc(adev);
+ if (IS_ERR(wm97xx->ac97))
+ return PTR_ERR(wm97xx->ac97);
+
+
+ ac97_set_drvdata(adev, wm97xx);
+ dev_info(wm97xx->dev, "wm97xx core found, id=0x%x\n",
+ adev->vendor_id);
+
+ switch (adev->vendor_id) {
+ ret = wm9705_register(wm97xx);
+ break;
+ ret = wm9712_register(wm97xx);
+ break;
+ ret = wm9713_register(wm97xx, pdata);
+ break;
+ ret = -ENODEV;
+ }
+
+ if (ret)
+ snd_ac97_compat_release(wm97xx->ac97);
+
+ return ret;
+}
+
+static int wm97xx_ac97_remove(struct ac97_codec_device *adev)
+{
+ struct wm97xx_priv *wm97xx = ac97_get_drvdata(adev);
+
+ snd_ac97_compat_release(wm97xx->ac97);
+
+ return 0;
+}
+
+static const struct ac97_id wm97xx_ac97_ids[] = {
+ { .id = WM9705_VENDOR_ID, .mask = WM97xx_VENDOR_ID_MASK },
+ { .id = WM9712_VENDOR_ID, .mask = WM97xx_VENDOR_ID_MASK },
+ { .id = WM9713_VENDOR_ID, .mask = WM97xx_VENDOR_ID_MASK },
+ { }
+};
+
+static struct ac97_codec_driver wm97xx_ac97_driver = {
+ .driver = {
+ .name = "wm97xx-core",
+ },
+ .probe = wm97xx_ac97_probe,
+ .remove = wm97xx_ac97_remove,
+ .id_table = wm97xx_ac97_ids,
+};
+
+static int __init wm97xx_module_init(void)
+{
+ return snd_ac97_codec_driver_register(&wm97xx_ac97_driver);
+}
+module_init(wm97xx_module_init);
+
+static void __exit wm97xx_module_exit(void)
+{
+ snd_ac97_codec_driver_unregister(&wm97xx_ac97_driver);
+}
+module_exit(wm97xx_module_exit);
+
+MODULE_DESCRIPTION("WM9712, WM9713 core driver");
+MODULE_LICENSE("GPL");
+
diff --git a/include/linux/mfd/wm97xx.h b/include/linux/mfd/wm97xx.h
new file mode 100644
index 000000000000..627322f14d48
--- /dev/null
+++ b/include/linux/mfd/wm97xx.h
@@ -0,0 +1,31 @@
+/*
+ * wm97xx client interface
+ *
+ * Copyright (C) 2016 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_MFD_WM97XX_H
+#define __LINUX_MFD_WM97XX_H
+
+struct regmap;
+struct wm97xx_batt_pdata;
+struct snd_ac97;
+
+struct wm97xx_platform_data {
+ struct snd_ac97 *ac97;
+ struct regmap *regmap;
+ struct wm97xx_batt_pdata *batt_pdata;
+};
+
+
+#endif
--
2.11.0
Other than those minor comments looks ok to me.

Thanks,
Charles
Robert Jarzmik
2017-07-20 20:30:45 UTC
Permalink
Post by Charles Keepax
Post by Robert Jarzmik
The WM9705, WM9712 and WM9713 are highly integrated codecs, with an
audio codec, DAC and ADC, GPIO unit and a touchscreen interface.
...
Post by Charles Keepax
Post by Robert Jarzmik
+static const struct reg_default wm97xx_reg_defaults[] = {
+};
Should we not have some defaults in here?
Most certainly, I'll copy-paste the ones from :
- sound/soc/codecs/wm9705.c
- sound/soc/codecs/wm9712.c
Post by Charles Keepax
Post by Robert Jarzmik
+static int wm9705_register(struct wm97xx_priv *wm97xx)
+{
+ return 0;
+}
+
+static int wm9712_register(struct wm97xx_priv *wm97xx)
+{
+ return 0;
+}
+
So are we only adding stubs for the 9705 and 9712? If so we
should probably make that clear in the commit message at least.
Mmmh, I think I've been too lazy here.
I'll add the true functions, which will be on par with wm9713_register(), adding
2 sub-cells, the codec and the touchscreen.

...zip..
Post by Charles Keepax
Post by Robert Jarzmik
+ codec_pdata.ac97 = wm97xx->ac97;
+ codec_pdata.regmap = devm_regmap_init_ac97(wm97xx->ac97,
+ &wm9713_regmap_config);
+ codec_pdata.batt_pdata = pdata->batt_pdata;
+ if (IS_ERR(codec_pdata.regmap))
+ return PTR_ERR(codec_pdata.regmap);
+
+ return devm_mfd_add_devices(wm97xx->dev, -1, cells,
Should probably use the define PLATFORM_DEVID_NONE here.
Yeah sure.
Post by Charles Keepax
Other than those minor comments looks ok to me.
Thanks Charles, I'll include them for next iteration.

Cheers.
--
Robert
Robert Jarzmik
2017-06-30 19:44:05 UTC
Permalink
Add support for the new ac97 bus model, where devices are automatically
discovered on AC-Links.

Signed-off-by: Robert Jarzmik <***@free.fr>
---
sound/soc/codecs/Kconfig | 3 ++-
sound/soc/codecs/wm9712.c | 37 ++++++++++++++++++++++++-------------
2 files changed, 26 insertions(+), 14 deletions(-)

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index aebf148d7e4d..f17af3592785 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -206,7 +206,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_WM9081 if I2C
select SND_SOC_WM9090 if I2C
select SND_SOC_WM9705 if SND_SOC_AC97_BUS
- select SND_SOC_WM9712 if SND_SOC_AC97_BUS
+ select SND_SOC_WM9712 if (SND_SOC_AC97_BUS || SND_SOC_AC97_BUS_NEW)
select SND_SOC_WM9713 if (SND_SOC_AC97_BUS || SND_SOC_AC97_BUS_NEW)
help
Normally ASoC codec drivers are only built if a machine driver which
@@ -1087,6 +1087,7 @@ config SND_SOC_WM9705
config SND_SOC_WM9712
tristate
select REGMAP_AC97
+ select AC97_BUS_COMPAT if AC97_BUS_NEW

config SND_SOC_WM9713
tristate
diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c
index 1a3e1797994a..9031c58d9bb2 100644
--- a/sound/soc/codecs/wm9712.c
+++ b/sound/soc/codecs/wm9712.c
@@ -12,6 +12,7 @@

#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/mfd/wm97xx.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
@@ -19,6 +20,8 @@
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/ac97_codec.h>
+#include <sound/ac97/codec.h>
+#include <sound/ac97/compat.h>
#include <sound/initval.h>
#include <sound/soc.h>
#include <sound/tlv.h>
@@ -30,6 +33,7 @@ struct wm9712_priv {
struct snd_ac97 *ac97;
unsigned int hp_mixer[2];
struct mutex lock;
+ struct wm97xx_platform_data *mfd_pdata;
};

static const struct reg_default wm9712_reg_defaults[] = {
@@ -636,18 +640,23 @@ static int wm9712_soc_probe(struct snd_soc_codec *codec)
struct regmap *regmap;
int ret;

- wm9712->ac97 = snd_soc_new_ac97_codec(codec, WM9712_VENDOR_ID,
- WM9712_VENDOR_ID_MASK);
- if (IS_ERR(wm9712->ac97)) {
- ret = PTR_ERR(wm9712->ac97);
- dev_err(codec->dev, "Failed to register AC97 codec: %d\n", ret);
- return ret;
- }
-
- regmap = regmap_init_ac97(wm9712->ac97, &wm9712_regmap_config);
- if (IS_ERR(regmap)) {
- ret = PTR_ERR(regmap);
- goto err_free_ac97_codec;
+ if (wm9712->mfd_pdata) {
+ wm9712->ac97 = wm9712->mfd_pdata->ac97;
+ regmap = wm9712->mfd_pdata->regmap;
+ } else {
+ wm9712->ac97 = snd_soc_new_ac97_codec(codec, WM9712_VENDOR_ID,
+ WM9712_VENDOR_ID_MASK);
+ if (IS_ERR(wm9712->ac97)) {
+ ret = PTR_ERR(wm9712->ac97);
+ dev_err(codec->dev,
+ "Failed to register AC97 codec: %d\n", ret);
+ return ret;
+ }
+
+ regmap = regmap_init_ac97(wm9712->ac97, &wm9712_regmap_config);
+ if (IS_ERR(regmap)) {
+ ret = PTR_ERR(regmap);
+ goto err_free_ac97_codec;
}

snd_soc_codec_init_regmap(codec, regmap);
@@ -666,7 +675,8 @@ static int wm9712_soc_remove(struct snd_soc_codec *codec)
struct wm9712_priv *wm9712 = snd_soc_codec_get_drvdata(codec);

snd_soc_codec_exit_regmap(codec);
- snd_soc_free_ac97_codec(wm9712->ac97);
+ if (!wm9712->mfd_pdata)
+ snd_soc_free_ac97_codec(wm9712->ac97);
return 0;
}

@@ -697,6 +707,7 @@ static int wm9712_probe(struct platform_device *pdev)

mutex_init(&wm9712->lock);

+ wm9712->mfd_pdata = dev_get_platdata(&pdev->dev);
platform_set_drvdata(pdev, wm9712);

return snd_soc_register_codec(&pdev->dev,
--
2.11.0
Robert Jarzmik
2017-06-30 19:44:04 UTC
Permalink
Add support for the new ac97 bus model, where devices are automatically
discovered on AC-Links.

Signed-off-by: Robert Jarzmik <***@free.fr>
---
sound/soc/codecs/Kconfig | 3 ++-
sound/soc/codecs/wm9713.c | 39 +++++++++++++++++++++++++++------------
2 files changed, 29 insertions(+), 13 deletions(-)

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index e49e9da7f1f6..aebf148d7e4d 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -207,7 +207,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_WM9090 if I2C
select SND_SOC_WM9705 if SND_SOC_AC97_BUS
select SND_SOC_WM9712 if SND_SOC_AC97_BUS
- select SND_SOC_WM9713 if SND_SOC_AC97_BUS
+ select SND_SOC_WM9713 if (SND_SOC_AC97_BUS || SND_SOC_AC97_BUS_NEW)
help
Normally ASoC codec drivers are only built if a machine driver which
uses them is also built since they are only usable with a machine
@@ -1091,6 +1091,7 @@ config SND_SOC_WM9712
config SND_SOC_WM9713
tristate
select REGMAP_AC97
+ select AC97_BUS_COMPAT if AC97_BUS_NEW

# Amp
config SND_SOC_LM4857
diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c
index 7e4822185feb..3df2c01d751d 100644
--- a/sound/soc/codecs/wm9713.c
+++ b/sound/soc/codecs/wm9713.c
@@ -17,12 +17,15 @@

#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/mfd/wm97xx.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/regmap.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/ac97_codec.h>
+#include <sound/ac97/codec.h>
+#include <sound/ac97/compat.h>
#include <sound/initval.h>
#include <sound/pcm_params.h>
#include <sound/tlv.h>
@@ -38,6 +41,7 @@ struct wm9713_priv {
u32 pll_in; /* PLL input frequency */
unsigned int hp_mixer[2];
struct mutex lock;
+ struct wm97xx_platform_data *mfd_pdata;
};

#define HPL_MIXER 0
@@ -1205,17 +1209,23 @@ static int wm9713_soc_resume(struct snd_soc_codec *codec)
static int wm9713_soc_probe(struct snd_soc_codec *codec)
{
struct wm9713_priv *wm9713 = snd_soc_codec_get_drvdata(codec);
- struct regmap *regmap;
+ struct regmap *regmap = NULL;

- wm9713->ac97 = snd_soc_new_ac97_codec(codec, WM9713_VENDOR_ID,
- WM9713_VENDOR_ID_MASK);
- if (IS_ERR(wm9713->ac97))
- return PTR_ERR(wm9713->ac97);
-
- regmap = regmap_init_ac97(wm9713->ac97, &wm9713_regmap_config);
- if (IS_ERR(regmap)) {
- snd_soc_free_ac97_codec(wm9713->ac97);
- return PTR_ERR(regmap);
+ if (wm9713->mfd_pdata) {
+ wm9713->ac97 = wm9713->mfd_pdata->ac97;
+ regmap = wm9713->mfd_pdata->regmap;
+ } else {
+#ifdef CONFIG_SND_SOC_AC97_BUS
+ wm9713->ac97 = snd_soc_new_ac97_codec(codec, WM9713_VENDOR_ID,
+ WM9713_VENDOR_ID_MASK);
+ if (IS_ERR(wm9713->ac97))
+ return PTR_ERR(wm9713->ac97);
+ regmap = regmap_init_ac97(wm9713->ac97, &wm9713_regmap_config);
+ if (IS_ERR(regmap)) {
+ snd_soc_free_ac97_codec(wm9713->ac97);
+ return PTR_ERR(regmap);
+ }
+#endif
}

snd_soc_codec_init_regmap(codec, regmap);
@@ -1230,8 +1240,12 @@ static int wm9713_soc_remove(struct snd_soc_codec *codec)
{
struct wm9713_priv *wm9713 = snd_soc_codec_get_drvdata(codec);

- snd_soc_codec_exit_regmap(codec);
- snd_soc_free_ac97_codec(wm9713->ac97);
+ if (!wm9713->mfd_pdata) {
+ snd_soc_codec_exit_regmap(codec);
+#ifdef CONFIG_SND_SOC_AC97_BUS
+ snd_soc_free_ac97_codec(wm9713->ac97);
+#endif
+ }
return 0;
}

@@ -1262,6 +1276,7 @@ static int wm9713_probe(struct platform_device *pdev)

mutex_init(&wm9713->lock);

+ wm9713->mfd_pdata = dev_get_platdata(&pdev->dev);
platform_set_drvdata(pdev, wm9713);

return snd_soc_register_codec(&pdev->dev,
--
2.11.0
Robert Jarzmik
2017-06-30 19:44:07 UTC
Permalink
Add support for the new ac97 bus model, where devices are automatically
discovered on AC-Links.

Signed-off-by: Robert Jarzmik <***@free.fr>
---
sound/soc/codecs/Kconfig | 3 ++-
sound/soc/codecs/wm9705.c | 35 +++++++++++++++++++++++------------
2 files changed, 25 insertions(+), 13 deletions(-)

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index f17af3592785..1d69a1c1f896 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -205,7 +205,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_WM8998 if MFD_WM8998
select SND_SOC_WM9081 if I2C
select SND_SOC_WM9090 if I2C
- select SND_SOC_WM9705 if SND_SOC_AC97_BUS
+ select SND_SOC_WM9705 if (SND_SOC_AC97_BUS || SND_SOC_AC97_BUS_NEW)
select SND_SOC_WM9712 if (SND_SOC_AC97_BUS || SND_SOC_AC97_BUS_NEW)
select SND_SOC_WM9713 if (SND_SOC_AC97_BUS || SND_SOC_AC97_BUS_NEW)
help
@@ -1083,6 +1083,7 @@ config SND_SOC_WM9090
config SND_SOC_WM9705
tristate
select REGMAP_AC97
+ select AC97_BUS_COMPAT if AC97_BUS_NEW

config SND_SOC_WM9712
tristate
diff --git a/sound/soc/codecs/wm9705.c b/sound/soc/codecs/wm9705.c
index 08477d040028..f3378da80eee 100644
--- a/sound/soc/codecs/wm9705.c
+++ b/sound/soc/codecs/wm9705.c
@@ -11,6 +11,7 @@

#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/mfd/wm97xx.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
@@ -18,6 +19,8 @@
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/ac97_codec.h>
+#include <sound/ac97/codec.h>
+#include <sound/ac97/compat.h>
#include <sound/initval.h>
#include <sound/soc.h>

@@ -26,6 +29,7 @@

struct wm9705_priv {
struct snd_ac97 *ac97;
+ struct wm97xx_platform_data *mfd_pdata;
};

static const struct reg_default wm9705_reg_defaults[] = {
@@ -319,17 +323,22 @@ static int wm9705_soc_probe(struct snd_soc_codec *codec)
struct regmap *regmap;
int ret;

- wm9705->ac97 = snd_soc_new_ac97_codec(codec, WM9705_VENDOR_ID,
- WM9705_VENDOR_ID_MASK);
- if (IS_ERR(wm9705->ac97)) {
- dev_err(codec->dev, "Failed to register AC97 codec\n");
- return PTR_ERR(wm9705->ac97);
- }
-
- regmap = regmap_init_ac97(wm9705->ac97, &wm9705_regmap_config);
- if (IS_ERR(regmap)) {
- ret = PTR_ERR(regmap);
- goto err_free_ac97_codec;
+ if (wm9705->mfd_pdata) {
+ wm9705->ac97 = wm9705->mfd_pdata->ac97;
+ regmap = wm9705->mfd_pdata->regmap;
+ } else {
+ wm9705->ac97 = snd_soc_new_ac97_codec(codec, WM9705_VENDOR_ID,
+ WM9705_VENDOR_ID_MASK);
+ if (IS_ERR(wm9705->ac97)) {
+ dev_err(codec->dev, "Failed to register AC97 codec\n");
+ return PTR_ERR(wm9705->ac97);
+ }
+
+ regmap = regmap_init_ac97(wm9705->ac97, &wm9705_regmap_config);
+ if (IS_ERR(regmap)) {
+ ret = PTR_ERR(regmap);
+ goto err_free_ac97_codec;
+ }
}

snd_soc_codec_set_drvdata(codec, wm9705->ac97);
@@ -346,7 +355,8 @@ static int wm9705_soc_remove(struct snd_soc_codec *codec)
struct wm9705_priv *wm9705 = snd_soc_codec_get_drvdata(codec);

snd_soc_codec_exit_regmap(codec);
- snd_soc_free_ac97_codec(wm9705->ac97);
+ if (!wm9705->mfd_pdata)
+ snd_soc_free_ac97_codec(wm9705->ac97);
return 0;
}

@@ -374,6 +384,7 @@ static int wm9705_probe(struct platform_device *pdev)
if (wm9705 == NULL)
return -ENOMEM;

+ wm9705->mfd_pdata = dev_get_platdata(&pdev->dev);
platform_set_drvdata(pdev, wm9705);

return snd_soc_register_codec(&pdev->dev,
--
2.11.0
Robert Jarzmik
2017-06-30 19:44:06 UTC
Permalink
Add a private data structure. This is a preparation for a codec which
would need an another data on top of snd_ac97, which will be the case
when an MFD wm97xx device will probe wm9705.

Signed-off-by: Robert Jarzmik <***@free.fr>
---
sound/soc/codecs/wm9705.c | 36 ++++++++++++++++++++++++------------
1 file changed, 24 insertions(+), 12 deletions(-)

diff --git a/sound/soc/codecs/wm9705.c b/sound/soc/codecs/wm9705.c
index f6d5c0f2aea5..08477d040028 100644
--- a/sound/soc/codecs/wm9705.c
+++ b/sound/soc/codecs/wm9705.c
@@ -24,6 +24,10 @@
#define WM9705_VENDOR_ID 0x574d4c05
#define WM9705_VENDOR_ID_MASK 0xffffffff

+struct wm9705_priv {
+ struct snd_ac97 *ac97;
+};
+
static const struct reg_default wm9705_reg_defaults[] = {
{ 0x02, 0x8000 },
{ 0x04, 0x8000 },
@@ -292,10 +296,10 @@ static int wm9705_soc_suspend(struct snd_soc_codec *codec)

static int wm9705_soc_resume(struct snd_soc_codec *codec)
{
- struct snd_ac97 *ac97 = snd_soc_codec_get_drvdata(codec);
+ struct wm9705_priv *wm9705 = snd_soc_codec_get_drvdata(codec);
int ret;

- ret = snd_ac97_reset(ac97, true, WM9705_VENDOR_ID,
+ ret = snd_ac97_reset(wm9705->ac97, true, WM9705_VENDOR_ID,
WM9705_VENDOR_ID_MASK);
if (ret < 0)
return ret;
@@ -311,38 +315,38 @@ static int wm9705_soc_resume(struct snd_soc_codec *codec)

static int wm9705_soc_probe(struct snd_soc_codec *codec)
{
- struct snd_ac97 *ac97;
+ struct wm9705_priv *wm9705 = snd_soc_codec_get_drvdata(codec);
struct regmap *regmap;
int ret;

- ac97 = snd_soc_new_ac97_codec(codec, WM9705_VENDOR_ID,
- WM9705_VENDOR_ID_MASK);
- if (IS_ERR(ac97)) {
+ wm9705->ac97 = snd_soc_new_ac97_codec(codec, WM9705_VENDOR_ID,
+ WM9705_VENDOR_ID_MASK);
+ if (IS_ERR(wm9705->ac97)) {
dev_err(codec->dev, "Failed to register AC97 codec\n");
- return PTR_ERR(ac97);
+ return PTR_ERR(wm9705->ac97);
}

- regmap = regmap_init_ac97(ac97, &wm9705_regmap_config);
+ regmap = regmap_init_ac97(wm9705->ac97, &wm9705_regmap_config);
if (IS_ERR(regmap)) {
ret = PTR_ERR(regmap);
goto err_free_ac97_codec;
}

- snd_soc_codec_set_drvdata(codec, ac97);
+ snd_soc_codec_set_drvdata(codec, wm9705->ac97);
snd_soc_codec_init_regmap(codec, regmap);

return 0;
err_free_ac97_codec:
- snd_soc_free_ac97_codec(ac97);
+ snd_soc_free_ac97_codec(wm9705->ac97);
return ret;
}

static int wm9705_soc_remove(struct snd_soc_codec *codec)
{
- struct snd_ac97 *ac97 = snd_soc_codec_get_drvdata(codec);
+ struct wm9705_priv *wm9705 = snd_soc_codec_get_drvdata(codec);

snd_soc_codec_exit_regmap(codec);
- snd_soc_free_ac97_codec(ac97);
+ snd_soc_free_ac97_codec(wm9705->ac97);
return 0;
}

@@ -364,6 +368,14 @@ static const struct snd_soc_codec_driver soc_codec_dev_wm9705 = {

static int wm9705_probe(struct platform_device *pdev)
{
+ struct wm9705_priv *wm9705;
+
+ wm9705 = devm_kzalloc(&pdev->dev, sizeof(*wm9705), GFP_KERNEL);
+ if (wm9705 == NULL)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, wm9705);
+
return snd_soc_register_codec(&pdev->dev,
&soc_codec_dev_wm9705, wm9705_dai, ARRAY_SIZE(wm9705_dai));
}
--
2.11.0
Charles Keepax
2017-07-03 09:16:31 UTC
Permalink
Post by Robert Jarzmik
Add a private data structure. This is a preparation for a codec which
would need an another data on top of snd_ac97, which will be the case
when an MFD wm97xx device will probe wm9705.
---
Acked-by: Charles Keepax <***@opensource.wolfsonmicro.com>

Thanks,
Charles
Robert Jarzmik
2017-06-30 19:43:58 UTC
Permalink
AC97 is a bus for sound usage. It enables for a AC97 AC-Link to link one
controller to 0 to 4 AC97 codecs.

The goal of this new implementation is to implement a device/driver
model for AC97, with an automatic scan of the bus and automatic
discovery of AC97 codec devices.

Signed-off-by: Robert Jarzmik <***@free.fr>
---
Since RFCv1:
- Takashi's review
- changed the codec.h guard ... a better name could be found ...
- added the AC97_* macros missing parenthesis
- constantified the id_table in the codec driver structure
- changed the 4 codecs linked list into an array
- enabled the ac97 bus to be a module
- added a slots_available to snd_ac97_controller_register() to have a
way to prevent scanning and probing of unconnected codecs
- removed useless ac97 bus index
- all exported functions begin with snd_ac97_*()
- change bus operations to controller+slot parameters instead of
codec device

- Mark's review
- changed ac97_digital_controller into ac97_controller
- rename ac97_digital_controller_*() into ac97_controller_*()
- add the ac97 ac-link clock to the codec device (ie. the AC'97
BIT_CLK)

Since RFCv2:
- more snd_ac97 namespace review
- change the compat allocation prototype to force the user to provide
and ac97_codec_device structure pointer

Since v1:
- took into account all Lars comments
---
include/sound/ac97/codec.h | 118 +++++++++
include/sound/ac97/compat.h | 21 ++
include/sound/ac97/controller.h | 85 +++++++
sound/ac97/Kconfig | 19 ++
sound/ac97/Makefile | 8 +
sound/ac97/ac97_core.h | 10 +
sound/ac97/bus.c | 526 ++++++++++++++++++++++++++++++++++++++++
sound/ac97/codec.c | 15 ++
sound/ac97/snd_ac97_compat.c | 105 ++++++++
9 files changed, 907 insertions(+)
create mode 100644 include/sound/ac97/codec.h
create mode 100644 include/sound/ac97/compat.h
create mode 100644 include/sound/ac97/controller.h
create mode 100644 sound/ac97/Kconfig
create mode 100644 sound/ac97/Makefile
create mode 100644 sound/ac97/ac97_core.h
create mode 100644 sound/ac97/bus.c
create mode 100644 sound/ac97/codec.c
create mode 100644 sound/ac97/snd_ac97_compat.c

diff --git a/include/sound/ac97/codec.h b/include/sound/ac97/codec.h
new file mode 100644
index 000000000000..ec04be9ab119
--- /dev/null
+++ b/include/sound/ac97/codec.h
@@ -0,0 +1,118 @@
+/*
+ * Copyright (C) 2016 Robert Jarzmik <***@free.fr>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __SOUND_AC97_CODEC2_H
+#define __SOUND_AC97_CODEC2_H
+
+#include <linux/device.h>
+
+#define AC97_ID(vendor_id1, vendor_id2) \
+ ((((vendor_id1) & 0xffff) << 16) | ((vendor_id2) & 0xffff))
+#define AC97_DRIVER_ID(vendor_id1, vendor_id2, mask_id1, mask_id2, _data) \
+ { .id = (((vendor_id1) & 0xffff) << 16) | ((vendor_id2) & 0xffff), \
+ .mask = (((mask_id1) & 0xffff) << 16) | ((mask_id2) & 0xffff), \
+ .data = (_data) }
+
+struct ac97_controller;
+struct clk;
+
+/**
+ * struct ac97_id - matches a codec device and driver on an ac97 bus
+ * @id: The significant bits if the codec vendor ID1 and ID2
+ * @mask: Bitmask specifying which bits of the id field are significant when
+ * matching. A driver binds to a device when :
+ * ((vendorID1 << 8 | vendorID2) & (mask_id1 << 8 | mask_id2)) == id.
+ * @data: Private data used by the driver.
+ */
+struct ac97_id {
+ unsigned int id;
+ unsigned int mask;
+ void *data;
+};
+
+/**
+ * ac97_codec_device - a ac97 codec
+ * @dev: the core device
+ * @vendor_id: the vendor_id of the codec, as sensed on the AC-link
+ * @num: the codec number, 0 is primary, 1 is first slave, etc ...
+ * @clk: the clock BIT_CLK provided by the codec
+ * @ac97_ctrl: ac97 digital controller on the same AC-link
+ *
+ * This is the device instantiated for each codec living on a AC-link. There are
+ * normally 0 to 4 codec devices per AC-link, and all of them are controlled by
+ * an AC97 digital controller.
+ */
+struct ac97_codec_device {
+ struct device dev;
+ unsigned int vendor_id;
+ unsigned int num;
+ struct clk *clk;
+ struct ac97_controller *ac97_ctrl;
+};
+
+/**
+ * ac97_codec_driver - a ac97 codec driver
+ * @driver: the device driver structure
+ * @probe: the function called when a ac97_codec_device is matched
+ * @remove: the function called when the device is unbound/removed
+ * @shutdown: shutdown function (might be NULL)
+ * @id_table: ac97 vendor_id match table, { } member terminated
+ */
+struct ac97_codec_driver {
+ struct device_driver driver;
+ int (*probe)(struct ac97_codec_device *);
+ int (*remove)(struct ac97_codec_device *);
+ void (*shutdown)(struct ac97_codec_device *);
+ const struct ac97_id *id_table;
+};
+
+static inline struct ac97_codec_device *to_ac97_device(struct device *d)
+{
+ return container_of(d, struct ac97_codec_device, dev);
+}
+
+static inline struct ac97_codec_driver *to_ac97_driver(struct device_driver *d)
+{
+ return container_of(d, struct ac97_codec_driver, driver);
+}
+
+#if IS_ENABLED(CONFIG_AC97_BUS_NEW)
+int snd_ac97_codec_driver_register(struct ac97_codec_driver *drv);
+void snd_ac97_codec_driver_unregister(struct ac97_codec_driver *drv);
+#else
+static inline int
+snd_ac97_codec_driver_register(struct ac97_codec_driver *drv)
+{
+ return 0;
+}
+static inline void
+snd_ac97_codec_driver_unregister(struct ac97_codec_driver *drv)
+{
+}
+#endif
+
+
+static inline struct device *
+ac97_codec_dev2dev(struct ac97_codec_device *adev)
+{
+ return &adev->dev;
+}
+
+static inline void *ac97_get_drvdata(struct ac97_codec_device *adev)
+{
+ return dev_get_drvdata(ac97_codec_dev2dev(adev));
+}
+
+static inline void ac97_set_drvdata(struct ac97_codec_device *adev,
+ void *data)
+{
+ dev_set_drvdata(ac97_codec_dev2dev(adev), data);
+}
+
+void *snd_ac97_codec_get_platdata(const struct ac97_codec_device *adev);
+
+#endif
diff --git a/include/sound/ac97/compat.h b/include/sound/ac97/compat.h
new file mode 100644
index 000000000000..d876464bf7e4
--- /dev/null
+++ b/include/sound/ac97/compat.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2016 Robert Jarzmik <***@free.fr>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file is for backward compatibility with snd_ac97 structure and its
+ * multiple usages, such as the snd_ac97_bus and snd_ac97_build_ops.
+ *
+ */
+#ifndef AC97_COMPAT_H
+#define AC97_COMPAT_H
+
+#include <sound/ac97_codec.h>
+#include <sound/soc.h>
+
+struct snd_ac97 *snd_ac97_compat_alloc(struct ac97_codec_device *adev);
+void snd_ac97_compat_release(struct snd_ac97 *ac97);
+
+#endif
diff --git a/include/sound/ac97/controller.h b/include/sound/ac97/controller.h
new file mode 100644
index 000000000000..a7e369875f98
--- /dev/null
+++ b/include/sound/ac97/controller.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2016 Robert Jarzmik <***@free.fr>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef AC97_CONTROLLER_H
+#define AC97_CONTROLLER_H
+
+#include <linux/list.h>
+
+#define AC97_BUS_MAX_CODECS 4
+#define AC97_SLOTS_AVAILABLE_ALL 0xf
+
+struct device;
+
+/**
+ * struct ac97_controller - The AC97 controller of the AC-Link
+ * @ops: the AC97 operations.
+ * @controllers: linked list of all existing controllers.
+ * @adap: the shell device ac97-%d, ie. ac97 adapter
+ * @nr: the number of the shell device
+ * @parent: the device providing the AC97 controller.
+ * @slots_available: the mask of accessible/scanable codecs.
+ * @codecs: the 4 possible AC97 codecs (NULL if none found).
+ * @codecs_pdata: platform_data for each codec (NULL if no pdata).
+ *
+ * This structure is internal to AC97 bus, and should not be used by the
+ * controllers themselves, excepting for using @dev.
+ */
+struct ac97_controller {
+ const struct ac97_controller_ops *ops;
+ struct list_head controllers;
+ struct device adap;
+ int nr;
+ struct device *parent;
+ unsigned short slots_available;
+ struct ac97_codec_device *codecs[AC97_BUS_MAX_CODECS];
+ void *codecs_pdata[AC97_BUS_MAX_CODECS];
+};
+
+/**
+ * struct ac97_controller_ops - The AC97 operations
+ * @reset: Cold reset of the AC97 AC-Link.
+ * @warm_reset: Warm reset of the AC97 AC-Link.
+ * @read: Read of a single AC97 register.
+ * Returns the register value or a negative error code.
+ * @write: Write of a single AC97 register.
+ *
+ * These are the basic operation an AC97 controller must provide for an AC97
+ * access functions. Amongst these, all but the last 2 are mandatory.
+ * The slot number is also known as the AC97 codec number, between 0 and 3.
+ */
+struct ac97_controller_ops {
+ void (*reset)(struct ac97_controller *adrv);
+ void (*warm_reset)(struct ac97_controller *adrv);
+ int (*write)(struct ac97_controller *adrv, int slot,
+ unsigned short reg, unsigned short val);
+ int (*read)(struct ac97_controller *adrv, int slot, unsigned short reg);
+};
+
+#if IS_ENABLED(CONFIG_AC97_BUS_NEW)
+struct ac97_controller *snd_ac97_controller_register(
+ const struct ac97_controller_ops *ops, struct device *dev,
+ unsigned short slots_available, void **codecs_pdata);
+void snd_ac97_controller_unregister(struct ac97_controller *ac97_ctrl);
+#else
+static inline int
+snd_ac97_controller_register(const struct ac97_controller_ops *ops,
+ struct device *dev,
+ unsigned short slots_available,
+ void **codecs_pdata)
+{
+ return 0;
+}
+
+static inline void
+snd_ac97_controller_unregister(struct ac97_controller *ac97_ctrl)
+{
+ return 0;
+}
+#endif
+
+#endif
diff --git a/sound/ac97/Kconfig b/sound/ac97/Kconfig
new file mode 100644
index 000000000000..f8a64e15e5bf
--- /dev/null
+++ b/sound/ac97/Kconfig
@@ -0,0 +1,19 @@
+#
+# AC97 configuration
+#
+
+
+config AC97_BUS_NEW
+ tristate
+ select AC97
+ help
+ This is the new AC97 bus type, successor of AC97_BUS. The ported
+ drivers which benefit from the AC97 automatic probing should "select"
+ this instead of the AC97_BUS.
+ Say Y here if you want to have AC97 devices, which are sound oriented
+ devices around an AC-Link.
+
+config AC97_BUS_COMPAT
+ bool
+ depends on AC97_BUS_NEW
+ depends on !AC97_BUS
diff --git a/sound/ac97/Makefile b/sound/ac97/Makefile
new file mode 100644
index 000000000000..f9c2640bfb59
--- /dev/null
+++ b/sound/ac97/Makefile
@@ -0,0 +1,8 @@
+#
+# make for AC97 bus drivers
+#
+
+obj-$(CONFIG_AC97_BUS_NEW) += ac97.o
+
+ac97-y += bus.o codec.o
+ac97-$(CONFIG_AC97_BUS_COMPAT) += snd_ac97_compat.o
diff --git a/sound/ac97/ac97_core.h b/sound/ac97/ac97_core.h
new file mode 100644
index 000000000000..219fec0d52e0
--- /dev/null
+++ b/sound/ac97/ac97_core.h
@@ -0,0 +1,10 @@
+/*
+ * Copyright (C) 2016 Robert Jarzmik <***@free.fr>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+unsigned int snd_ac97_bus_scan_one(struct ac97_controller *ac97,
+ unsigned int codec_num);
diff --git a/sound/ac97/bus.c b/sound/ac97/bus.c
new file mode 100644
index 000000000000..7cda8175341e
--- /dev/null
+++ b/sound/ac97/bus.c
@@ -0,0 +1,526 @@
+/*
+ * Copyright (C) 2016 Robert Jarzmik <***@free.fr>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/idr.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <sound/ac97/codec.h>
+#include <sound/ac97/controller.h>
+#include <sound/ac97/regs.h>
+
+#include "ac97_core.h"
+
+/*
+ * Protects ac97_controllers and each ac97_controller structure.
+ */
+static DEFINE_MUTEX(ac97_controllers_mutex);
+static DEFINE_IDR(ac97_adapter_idr);
+static LIST_HEAD(ac97_controllers);
+
+static struct bus_type ac97_bus_type;
+
+static inline struct ac97_controller*
+to_ac97_controller(struct device *ac97_adapter)
+{
+ return container_of(ac97_adapter, struct ac97_controller, adap);
+}
+
+static int ac97_unbound_ctrl_write(struct ac97_controller *adrv, int slot,
+ unsigned short reg, unsigned short val)
+{
+ return -ENODEV;
+}
+
+static int ac97_unbound_ctrl_read(struct ac97_controller *adrv, int slot,
+ unsigned short reg)
+{
+ return -ENODEV;
+}
+
+static const struct ac97_controller_ops ac97_unbound_ctrl_ops = {
+ .write = ac97_unbound_ctrl_write,
+ .read = ac97_unbound_ctrl_read,
+};
+
+static struct ac97_controller ac97_unbound_ctrl = {
+ .ops = &ac97_unbound_ctrl_ops,
+};
+
+static struct ac97_codec_device *
+ac97_codec_find(struct ac97_controller *ac97_ctrl, unsigned int codec_num)
+{
+ if (codec_num >= AC97_BUS_MAX_CODECS)
+ return ERR_PTR(-EINVAL);
+
+ return ac97_ctrl->codecs[codec_num];
+}
+
+static void ac97_codec_release(struct device *dev)
+{
+ struct ac97_codec_device *adev;
+ struct ac97_controller *ac97_ctrl;
+
+ adev = to_ac97_device(dev);
+ ac97_ctrl = adev->ac97_ctrl;
+ ac97_ctrl->codecs[adev->num] = NULL;
+ sysfs_remove_link(&dev->kobj, "ac97_controller");
+ kfree(adev);
+}
+
+static int ac97_codec_add(struct ac97_controller *ac97_ctrl, int idx,
+ unsigned int vendor_id)
+{
+ struct ac97_codec_device *codec;
+ int ret;
+
+ codec = kzalloc(sizeof(*codec), GFP_KERNEL);
+ if (!codec)
+ return -ENOMEM;
+ ac97_ctrl->codecs[idx] = codec;
+ codec->vendor_id = vendor_id;
+ codec->dev.release = ac97_codec_release;
+ codec->dev.bus = &ac97_bus_type;
+ codec->dev.parent = &ac97_ctrl->adap;
+ codec->num = idx;
+ codec->ac97_ctrl = ac97_ctrl;
+
+ device_initialize(&codec->dev);
+ dev_set_name(&codec->dev, "%s:%u", dev_name(ac97_ctrl->parent), idx);
+
+ ret = device_add(&codec->dev);
+ if (ret)
+ goto err_free_codec;
+
+ return 0;
+err_free_codec:
+ kfree(codec);
+ ac97_ctrl->codecs[idx] = NULL;
+
+ return ret;
+}
+
+unsigned int snd_ac97_bus_scan_one(struct ac97_controller *adrv,
+ unsigned int codec_num)
+{
+ unsigned short vid1, vid2;
+ int ret;
+
+ ret = adrv->ops->read(adrv, codec_num, AC97_VENDOR_ID1);
+ vid1 = (ret & 0xffff);
+ if (ret < 0)
+ return 0;
+
+ ret = adrv->ops->read(adrv, codec_num, AC97_VENDOR_ID2);
+ vid2 = (ret & 0xffff);
+ if (ret < 0)
+ return 0;
+
+ dev_dbg(&adrv->adap, "%s(codec_num=%u): vendor_id=0x%08x\n",
+ __func__, codec_num, AC97_ID(vid1, vid2));
+ return AC97_ID(vid1, vid2);
+}
+
+static int ac97_bus_scan(struct ac97_controller *ac97_ctrl)
+{
+ int ret, i;
+ unsigned int vendor_id;
+
+ for (i = 0; i < AC97_BUS_MAX_CODECS; i++) {
+ if (ac97_codec_find(ac97_ctrl, i))
+ continue;
+ if (!(ac97_ctrl->slots_available & BIT(i)))
+ continue;
+ vendor_id = snd_ac97_bus_scan_one(ac97_ctrl, i);
+ if (!vendor_id)
+ continue;
+
+ ret = ac97_codec_add(ac97_ctrl, i, vendor_id);
+ if (ret < 0)
+ return ret;
+ }
+ return 0;
+}
+
+static int ac97_bus_reset(struct ac97_controller *ac97_ctrl)
+{
+ ac97_ctrl->ops->reset(ac97_ctrl);
+
+ return 0;
+}
+
+/**
+ * snd_ac97_codec_driver_register - register an AC97 codec driver
+ * @dev: AC97 driver codec to register
+ *
+ * Register an AC97 codec driver to the ac97 bus driver, aka. the AC97 digital
+ * controller.
+ *
+ * Returns 0 on success or error code
+ */
+int snd_ac97_codec_driver_register(struct ac97_codec_driver *drv)
+{
+ int ret;
+
+ drv->driver.bus = &ac97_bus_type;
+ ret = driver_register(&drv->driver);
+
+ return ret;
+}
+EXPORT_SYMBOL(snd_ac97_codec_driver_register);
+
+/**
+ * snd_ac97_codec_driver_unregister - unregister an AC97 codec driver
+ * @dev: AC97 codec driver to unregister
+ *
+ * Unregister a previously registered ac97 codec driver.
+ */
+void snd_ac97_codec_driver_unregister(struct ac97_codec_driver *drv)
+{
+ driver_unregister(&drv->driver);
+}
+EXPORT_SYMBOL(snd_ac97_codec_driver_unregister);
+
+/**
+ * snd_ac97_codec_get_platdata - get platform_data
+ * @adev: the ac97 codec device
+ *
+ * For legacy platforms, in order to have platform_data in codec drivers
+ * available, while ac97 device are auto-created upon probe, this retrieves the
+ * platdata which was setup on ac97 controller registration.
+ *
+ * Returns the platform data pointer
+ */
+void *snd_ac97_codec_get_platdata(const struct ac97_codec_device *adev)
+{
+ struct ac97_controller *ac97_ctrl = adev->ac97_ctrl;
+
+ return ac97_ctrl->codecs_pdata[adev->num];
+}
+EXPORT_SYMBOL(snd_ac97_codec_get_platdata);
+
+static void ac97_ctrl_codecs_unregister(struct ac97_controller *ac97_ctrl)
+{
+ int i;
+
+ for (i = 0; i < AC97_BUS_MAX_CODECS; i++)
+ if (ac97_ctrl->codecs[i]) {
+ ac97_ctrl->codecs[i]->ac97_ctrl = &ac97_unbound_ctrl;
+ device_unregister(&ac97_ctrl->codecs[i]->dev);
+ }
+}
+
+static ssize_t cold_reset_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t len)
+{
+ struct ac97_controller *ac97_ctrl;
+
+ mutex_lock(&ac97_controllers_mutex);
+ ac97_ctrl = to_ac97_controller(dev);
+ ac97_ctrl->ops->reset(ac97_ctrl);
+ mutex_unlock(&ac97_controllers_mutex);
+ return len;
+}
+static DEVICE_ATTR_WO(cold_reset);
+
+static ssize_t warm_reset_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t len)
+{
+ struct ac97_controller *ac97_ctrl;
+
+ if (!dev)
+ return -ENODEV;
+
+ mutex_lock(&ac97_controllers_mutex);
+ ac97_ctrl = to_ac97_controller(dev);
+ ac97_ctrl->ops->warm_reset(ac97_ctrl);
+ mutex_unlock(&ac97_controllers_mutex);
+ return len;
+}
+static DEVICE_ATTR_WO(warm_reset);
+
+static struct attribute *ac97_controller_device_attrs[] = {
+ &dev_attr_cold_reset.attr,
+ &dev_attr_warm_reset.attr,
+ NULL
+};
+
+static struct attribute_group ac97_adapter_attr_group = {
+ .name = "ac97_operations",
+ .attrs = ac97_controller_device_attrs,
+};
+
+static const struct attribute_group *ac97_adapter_groups[] = {
+ &ac97_adapter_attr_group,
+ NULL,
+};
+
+static const struct device_type ac97_adapter_type = {
+ .groups = ac97_adapter_groups,
+};
+
+static int ac97_add_adapter(struct ac97_controller *ac97_ctrl)
+{
+ int ret;
+
+ mutex_lock(&ac97_controllers_mutex);
+ ret = idr_alloc(&ac97_adapter_idr, ac97_ctrl, 0, 0, GFP_KERNEL);
+ ac97_ctrl->nr = ret;
+ if (ret >= 0) {
+ dev_set_name(&ac97_ctrl->adap, "ac97-%d", ret);
+ ac97_ctrl->adap.type = &ac97_adapter_type;
+ ac97_ctrl->adap.parent = ac97_ctrl->parent;
+ ret = device_register(&ac97_ctrl->adap);
+ if (ret)
+ put_device(&ac97_ctrl->adap);
+ }
+ if (!ret)
+ list_add(&ac97_ctrl->controllers, &ac97_controllers);
+ mutex_unlock(&ac97_controllers_mutex);
+
+ if (!ret)
+ dev_dbg(&ac97_ctrl->adap, "adapter registered by %s\n",
+ dev_name(ac97_ctrl->parent));
+ return ret;
+}
+
+static void ac97_del_adapter(struct ac97_controller *ac97_ctrl)
+{
+ mutex_lock(&ac97_controllers_mutex);
+ ac97_ctrl_codecs_unregister(ac97_ctrl);
+ list_del(&ac97_ctrl->controllers);
+ idr_remove(&ac97_adapter_idr, ac97_ctrl->nr);
+ mutex_unlock(&ac97_controllers_mutex);
+ put_device(&ac97_ctrl->adap);
+}
+
+/**
+ * snd_ac97_controller_register - register an ac97 controller
+ * @ops: the ac97 bus operations
+ * @dev: the device providing the ac97 DC function
+ * @slots_available: mask of the ac97 codecs that can be scanned and probed
+ * bit0 => codec 0, bit1 => codec 1 ... bit 3 => codec 3
+ *
+ * Register a digital controller which can control up to 4 ac97 codecs. This is
+ * the controller side of the AC97 AC-link, while the slave side are the codecs.
+ *
+ * Returns a valid controller upon success, negative pointer value upon error
+ */
+struct ac97_controller *snd_ac97_controller_register(
+ const struct ac97_controller_ops *ops, struct device *dev,
+ unsigned short slots_available, void **codecs_pdata)
+{
+ struct ac97_controller *ac97_ctrl;
+ int ret, i;
+
+ ac97_ctrl = kzalloc(sizeof(*ac97_ctrl), GFP_KERNEL);
+ if (!ac97_ctrl)
+ return ERR_PTR(-ENOMEM);
+
+ for (i = 0; i < AC97_BUS_MAX_CODECS && codecs_pdata; i++)
+ ac97_ctrl->codecs_pdata[i] = codecs_pdata[i];
+
+ ac97_ctrl->ops = ops;
+ ac97_ctrl->slots_available = slots_available;
+ ac97_ctrl->parent = dev;
+ ret = ac97_add_adapter(ac97_ctrl);
+
+ if (ret)
+ goto err;
+ ac97_bus_reset(ac97_ctrl);
+ ac97_bus_scan(ac97_ctrl);
+
+ return ac97_ctrl;
+err:
+ kfree(ac97_ctrl);
+ return ERR_PTR(ret);
+}
+EXPORT_SYMBOL(snd_ac97_controller_register);
+
+/**
+ * snd_ac97_controller_unregister - unregister an ac97 controller
+ * @ac97_ctrl: the device previously provided to ac97_controller_register()
+ *
+ */
+void snd_ac97_controller_unregister(struct ac97_controller *ac97_ctrl)
+{
+ ac97_del_adapter(ac97_ctrl);
+}
+EXPORT_SYMBOL(snd_ac97_controller_unregister);
+
+#ifdef CONFIG_PM
+static int ac97_pm_runtime_suspend(struct device *dev)
+{
+ struct ac97_codec_device *codec = to_ac97_device(dev);
+ int ret = pm_generic_runtime_suspend(dev);
+
+ if (ret == 0 && dev->driver) {
+ if (pm_runtime_is_irq_safe(dev))
+ clk_disable(codec->clk);
+ else
+ clk_disable_unprepare(codec->clk);
+ }
+
+ return ret;
+}
+
+static int ac97_pm_runtime_resume(struct device *dev)
+{
+ struct ac97_codec_device *codec = to_ac97_device(dev);
+ int ret;
+
+ if (dev->driver) {
+ if (pm_runtime_is_irq_safe(dev))
+ ret = clk_enable(codec->clk);
+ else
+ ret = clk_prepare_enable(codec->clk);
+ if (ret)
+ return ret;
+ }
+
+ return pm_generic_runtime_resume(dev);
+}
+#endif /* CONFIG_PM */
+
+static const struct dev_pm_ops ac97_pm = {
+ .suspend = pm_generic_suspend,
+ .resume = pm_generic_resume,
+ .freeze = pm_generic_freeze,
+ .thaw = pm_generic_thaw,
+ .poweroff = pm_generic_poweroff,
+ .restore = pm_generic_restore,
+ SET_RUNTIME_PM_OPS(
+ ac97_pm_runtime_suspend,
+ ac97_pm_runtime_resume,
+ NULL)
+};
+
+static int ac97_get_enable_clk(struct ac97_codec_device *adev)
+{
+ int ret;
+
+ adev->clk = clk_get(&adev->dev, "ac97_clk");
+ if (IS_ERR(adev->clk))
+ return PTR_ERR(adev->clk);
+
+ ret = clk_prepare_enable(adev->clk);
+ if (ret)
+ clk_put(adev->clk);
+
+ return ret;
+}
+
+static void ac97_put_disable_clk(struct ac97_codec_device *adev)
+{
+ clk_disable_unprepare(adev->clk);
+ clk_put(adev->clk);
+}
+
+static ssize_t vendor_id_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ac97_codec_device *codec = to_ac97_device(dev);
+
+ return sprintf(buf, "%08x", codec->vendor_id);
+}
+DEVICE_ATTR_RO(vendor_id);
+
+static struct attribute *ac97_dev_attrs[] = {
+ &dev_attr_vendor_id.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(ac97_dev);
+
+static int ac97_bus_match(struct device *dev, struct device_driver *drv)
+{
+ struct ac97_codec_device *adev = to_ac97_device(dev);
+ struct ac97_codec_driver *adrv = to_ac97_driver(drv);
+ const struct ac97_id *id = adrv->id_table;
+ int i = 0;
+
+ if (adev->vendor_id == 0x0 || adev->vendor_id == 0xffffffff)
+ return false;
+
+ do {
+ if ((id[i].id & id->mask) == (adev->vendor_id & id[i].mask))
+ return true;
+ } while (id[i++].id);
+
+ return false;
+}
+
+static int ac97_bus_probe(struct device *dev)
+{
+ struct ac97_codec_device *adev = to_ac97_device(dev);
+ struct ac97_codec_driver *adrv = to_ac97_driver(dev->driver);
+ int ret;
+
+ ret = ac97_get_enable_clk(adev);
+ if (ret)
+ return ret;
+
+ pm_runtime_get_noresume(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+
+ ret = adrv->probe(adev);
+ if (ret == 0)
+ return 0;
+
+ pm_runtime_disable(dev);
+ pm_runtime_set_suspended(dev);
+ pm_runtime_put_noidle(dev);
+ ac97_put_disable_clk(adev);
+
+ return ret;
+}
+
+static int ac97_bus_remove(struct device *dev)
+{
+ struct ac97_codec_device *adev = to_ac97_device(dev);
+ struct ac97_codec_driver *adrv = to_ac97_driver(dev->driver);
+ int ret;
+
+ ret = pm_runtime_get_sync(dev);
+ if (ret)
+ return ret;
+
+ ret = adrv->remove(adev);
+ pm_runtime_put_noidle(dev);
+ if (ret == 0)
+ ac97_put_disable_clk(adev);
+
+ return ret;
+}
+
+static struct bus_type ac97_bus_type = {
+ .name = "ac97",
+ .dev_groups = ac97_dev_groups,
+ .match = ac97_bus_match,
+ .pm = &ac97_pm,
+ .probe = ac97_bus_probe,
+ .remove = ac97_bus_remove,
+};
+
+static int __init ac97_bus_init(void)
+{
+ return bus_register(&ac97_bus_type);
+}
+subsys_initcall(ac97_bus_init);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Robert Jarzmik <***@free.fr>");
diff --git a/sound/ac97/codec.c b/sound/ac97/codec.c
new file mode 100644
index 000000000000..a835f03744bf
--- /dev/null
+++ b/sound/ac97/codec.c
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2016 Robert Jarzmik <***@free.fr>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <sound/ac97_codec.h>
+#include <sound/ac97/codec.h>
+#include <sound/ac97/controller.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <sound/soc.h> /* For compat_ac97_* */
+
diff --git a/sound/ac97/snd_ac97_compat.c b/sound/ac97/snd_ac97_compat.c
new file mode 100644
index 000000000000..ac8d835c1513
--- /dev/null
+++ b/sound/ac97/snd_ac97_compat.c
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2016 Robert Jarzmik <***@free.fr>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <sound/ac97/codec.h>
+#include <sound/ac97/compat.h>
+#include <sound/ac97/controller.h>
+#include <sound/soc.h>
+
+#include "ac97_core.h"
+
+static void compat_ac97_reset(struct snd_ac97 *ac97)
+{
+ struct ac97_codec_device *adev = to_ac97_device(ac97->private_data);
+ struct ac97_controller *actrl = adev->ac97_ctrl;
+
+ if (actrl->ops->reset)
+ actrl->ops->reset(actrl);
+}
+
+static void compat_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+ struct ac97_codec_device *adev = to_ac97_device(ac97->private_data);
+ struct ac97_controller *actrl = adev->ac97_ctrl;
+
+ if (actrl->ops->warm_reset)
+ actrl->ops->warm_reset(actrl);
+}
+
+static void compat_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
+ unsigned short val)
+{
+ struct ac97_codec_device *adev = to_ac97_device(ac97->private_data);
+ struct ac97_controller *actrl = adev->ac97_ctrl;
+
+ actrl->ops->write(actrl, ac97->num, reg, val);
+}
+
+static unsigned short compat_ac97_read(struct snd_ac97 *ac97,
+ unsigned short reg)
+{
+ struct ac97_codec_device *adev = to_ac97_device(ac97->private_data);
+ struct ac97_controller *actrl = adev->ac97_ctrl;
+
+ return actrl->ops->read(actrl, ac97->num, reg);
+}
+
+static struct snd_ac97_bus_ops compat_snd_ac97_bus_ops = {
+ .reset = compat_ac97_reset,
+ .warm_reset = compat_ac97_warm_reset,
+ .write = compat_ac97_write,
+ .read = compat_ac97_read,
+};
+
+static struct snd_ac97_bus compat_soc_ac97_bus = {
+ .ops = &compat_snd_ac97_bus_ops,
+};
+
+struct snd_ac97 *snd_ac97_compat_alloc(struct ac97_codec_device *adev)
+{
+ struct snd_ac97 *ac97;
+
+ ac97 = kzalloc(sizeof(struct snd_ac97), GFP_KERNEL);
+ if (ac97 == NULL)
+ return ERR_PTR(-ENOMEM);
+
+ ac97->dev = adev->dev;
+ ac97->private_data = adev;
+ ac97->bus = &compat_soc_ac97_bus;
+ return ac97;
+}
+EXPORT_SYMBOL_GPL(snd_ac97_compat_alloc);
+
+void snd_ac97_compat_release(struct snd_ac97 *ac97)
+{
+ kfree(ac97);
+}
+EXPORT_SYMBOL_GPL(snd_ac97_compat_release);
+
+int snd_ac97_reset(struct snd_ac97 *ac97, bool try_warm, unsigned int id,
+ unsigned int id_mask)
+{
+ struct ac97_codec_device *adev = to_ac97_device(ac97->private_data);
+ struct ac97_controller *actrl = adev->ac97_ctrl;
+
+ if (try_warm) {
+ compat_ac97_warm_reset(ac97);
+ if (snd_ac97_bus_scan_one(actrl, adev->num) == adev->vendor_id)
+ return 1;
+ }
+
+ compat_ac97_reset(ac97);
+ compat_ac97_warm_reset(ac97);
+ if (snd_ac97_bus_scan_one(actrl, adev->num) == adev->vendor_id)
+ return 0;
+
+ return -ENODEV;
+}
+EXPORT_SYMBOL_GPL(snd_ac97_reset);
--
2.11.0
Takashi Iwai
2017-07-03 09:13:04 UTC
Permalink
On Fri, 30 Jun 2017 21:43:58 +0200,
Post by Robert Jarzmik
+static struct bus_type ac97_bus_type = {
+ .name = "ac97",
Name-conflict with the old ac97 bus?
Post by Robert Jarzmik
+ .dev_groups = ac97_dev_groups,
+ .match = ac97_bus_match,
+ .pm = &ac97_pm,
+ .probe = ac97_bus_probe,
+ .remove = ac97_bus_remove,
+};
+
+static int __init ac97_bus_init(void)
+{
+ return bus_register(&ac97_bus_type);
+}
+subsys_initcall(ac97_bus_init);
+
+MODULE_LICENSE("GPL");
No bus_unregister() at exit?


thanks,

Takashi
Robert Jarzmik
2017-07-04 19:37:48 UTC
Permalink
Post by Takashi Iwai
On Fri, 30 Jun 2017 21:43:58 +0200,
Post by Robert Jarzmik
+static struct bus_type ac97_bus_type = {
+ .name = "ac97",
Name-conflict with the old ac97 bus?
Yeah, fair point. So what should I choose for this new one ?
- ac97new
- ac97bis
- ac97_2
- ac97reborn
Post by Takashi Iwai
Post by Robert Jarzmik
+static int __init ac97_bus_init(void)
+{
+ return bus_register(&ac97_bus_type);
+}
+subsys_initcall(ac97_bus_init);
+
+MODULE_LICENSE("GPL");
No bus_unregister() at exit?
Mmmh, that's because I used subsys_initcall(), which doesn't look good in a
module compilation setup. That will require a module_init(), and I will think
about how to implement it and test it for next iteration.

Cheers.
--
Robert
Takashi Iwai
2017-07-04 20:10:28 UTC
Permalink
On Tue, 04 Jul 2017 21:37:48 +0200,
Post by Robert Jarzmik
Post by Takashi Iwai
On Fri, 30 Jun 2017 21:43:58 +0200,
Post by Robert Jarzmik
+static struct bus_type ac97_bus_type = {
+ .name = "ac97",
Name-conflict with the old ac97 bus?
Yeah, fair point. So what should I choose for this new one ?
- ac97new
- ac97bis
- ac97_2
- ac97reborn
ac97bus
ac97_episode_5
ac98
...

I have no opinion on it.
Post by Robert Jarzmik
Post by Takashi Iwai
Post by Robert Jarzmik
+static int __init ac97_bus_init(void)
+{
+ return bus_register(&ac97_bus_type);
+}
+subsys_initcall(ac97_bus_init);
+
+MODULE_LICENSE("GPL");
No bus_unregister() at exit?
Mmmh, that's because I used subsys_initcall(), which doesn't look good in a
module compilation setup. That will require a module_init(), and I will think
about how to implement it and test it for next iteration.
You can use subsys_init() for modules, it's no problem.
When it's built for a module, all xxx_init() is handled as equivalent
with module_init(). See linux/module.h.

It's just the lack of module_exit() in your case.


thanks,

Takashi
Robert Jarzmik
2017-07-05 20:21:39 UTC
Permalink
Post by Takashi Iwai
On Tue, 04 Jul 2017 21:37:48 +0200,
Post by Robert Jarzmik
Post by Takashi Iwai
On Fri, 30 Jun 2017 21:43:58 +0200,
Post by Robert Jarzmik
+static struct bus_type ac97_bus_type = {
+ .name = "ac97",
Name-conflict with the old ac97 bus?
Yeah, fair point. So what should I choose for this new one ?
- ac97new
- ac97bis
- ac97_2
- ac97reborn
ac97bus
ac97_episode_5
ac98
...
I have no opinion on it.
Ah clone wars one is really tempting :)
But let's have ac97bus actually.
Post by Takashi Iwai
You can use subsys_init() for modules, it's no problem.
When it's built for a module, all xxx_init() is handled as equivalent
with module_init(). See linux/module.h.
It's just the lack of module_exit() in your case.
Got it, I'll add it for v4.

Cheers.
--
Robert
Robert Jarzmik
2017-06-30 19:43:57 UTC
Permalink
Split out from the ac97_codec.h the ac97 generic registers, which can be
used by a codec, typically a generic ac97 codec, and by the ac97 bus, to
scan an ac97 AC-Link.

This split encompasses all the AC97 standard registers, but not the
codec specific ones.

In order to have a clean split between former ac97 bus implementation
and the new coming one in sound/ac97, it is safer to not include any
former ac97 includes, excepting in sound/ac97/compat.c.

Amongst the thing to isolate :
- don't have the struct snd_ac97 in sound/ac97/* (except compat.c) to not
be "fooled" by a definition which would come with ac97_codec.h by
"chance".
- don't have to have snd_a97_*() functions, as they rely on struct
snd_ac97.
- don't want the struct snd_ac97_bus_ops, there is a new one

Signed-off-by: Robert Jarzmik <***@free.fr>
---
Since v1: improve commit message to explain better the rationale
Since v2: fixed too long commit line
---
include/sound/ac97/regs.h | 262 +++++++++++++++++++++++++++++++++++++++++++++
include/sound/ac97_codec.h | 239 +----------------------------------------
2 files changed, 263 insertions(+), 238 deletions(-)
create mode 100644 include/sound/ac97/regs.h

diff --git a/include/sound/ac97/regs.h b/include/sound/ac97/regs.h
new file mode 100644
index 000000000000..4bb86d379bd5
--- /dev/null
+++ b/include/sound/ac97/regs.h
@@ -0,0 +1,262 @@
+/*
+ * Copyright (c) by Jaroslav Kysela <***@perex.cz>
+ * Universal interface for Audio Codec '97
+ *
+ * For more details look to AC '97 component specification revision 2.1
+ * by Intel Corporation (http://developer.intel.com).
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+/*
+ * AC'97 codec registers
+ */
+
+#define AC97_RESET 0x00 /* Reset */
+#define AC97_MASTER 0x02 /* Master Volume */
+#define AC97_HEADPHONE 0x04 /* Headphone Volume (optional) */
+#define AC97_MASTER_MONO 0x06 /* Master Volume Mono (optional) */
+#define AC97_MASTER_TONE 0x08 /* Master Tone (Bass & Treble) (optional) */
+#define AC97_PC_BEEP 0x0a /* PC Beep Volume (optinal) */
+#define AC97_PHONE 0x0c /* Phone Volume (optional) */
+#define AC97_MIC 0x0e /* MIC Volume */
+#define AC97_LINE 0x10 /* Line In Volume */
+#define AC97_CD 0x12 /* CD Volume */
+#define AC97_VIDEO 0x14 /* Video Volume (optional) */
+#define AC97_AUX 0x16 /* AUX Volume (optional) */
+#define AC97_PCM 0x18 /* PCM Volume */
+#define AC97_REC_SEL 0x1a /* Record Select */
+#define AC97_REC_GAIN 0x1c /* Record Gain */
+#define AC97_REC_GAIN_MIC 0x1e /* Record Gain MIC (optional) */
+#define AC97_GENERAL_PURPOSE 0x20 /* General Purpose (optional) */
+#define AC97_3D_CONTROL 0x22 /* 3D Control (optional) */
+#define AC97_INT_PAGING 0x24 /* Audio Interrupt & Paging (AC'97 2.3) */
+#define AC97_POWERDOWN 0x26 /* Powerdown control / status */
+/* range 0x28-0x3a - AUDIO AC'97 2.0 extensions */
+#define AC97_EXTENDED_ID 0x28 /* Extended Audio ID */
+#define AC97_EXTENDED_STATUS 0x2a /* Extended Audio Status and Control */
+#define AC97_PCM_FRONT_DAC_RATE 0x2c /* PCM Front DAC Rate */
+#define AC97_PCM_SURR_DAC_RATE 0x2e /* PCM Surround DAC Rate */
+#define AC97_PCM_LFE_DAC_RATE 0x30 /* PCM LFE DAC Rate */
+#define AC97_PCM_LR_ADC_RATE 0x32 /* PCM LR ADC Rate */
+#define AC97_PCM_MIC_ADC_RATE 0x34 /* PCM MIC ADC Rate */
+#define AC97_CENTER_LFE_MASTER 0x36 /* Center + LFE Master Volume */
+#define AC97_SURROUND_MASTER 0x38 /* Surround (Rear) Master Volume */
+#define AC97_SPDIF 0x3a /* S/PDIF control */
+/* range 0x3c-0x58 - MODEM */
+#define AC97_EXTENDED_MID 0x3c /* Extended Modem ID */
+#define AC97_EXTENDED_MSTATUS 0x3e /* Extended Modem Status and Control */
+#define AC97_LINE1_RATE 0x40 /* Line1 DAC/ADC Rate */
+#define AC97_LINE2_RATE 0x42 /* Line2 DAC/ADC Rate */
+#define AC97_HANDSET_RATE 0x44 /* Handset DAC/ADC Rate */
+#define AC97_LINE1_LEVEL 0x46 /* Line1 DAC/ADC Level */
+#define AC97_LINE2_LEVEL 0x48 /* Line2 DAC/ADC Level */
+#define AC97_HANDSET_LEVEL 0x4a /* Handset DAC/ADC Level */
+#define AC97_GPIO_CFG 0x4c /* GPIO Configuration */
+#define AC97_GPIO_POLARITY 0x4e /* GPIO Pin Polarity/Type, 0=low, 1=high active */
+#define AC97_GPIO_STICKY 0x50 /* GPIO Pin Sticky, 0=not, 1=sticky */
+#define AC97_GPIO_WAKEUP 0x52 /* GPIO Pin Wakeup, 0=no int, 1=yes int */
+#define AC97_GPIO_STATUS 0x54 /* GPIO Pin Status, slot 12 */
+#define AC97_MISC_AFE 0x56 /* Miscellaneous Modem AFE Status and Control */
+/* range 0x5a-0x7b - Vendor Specific */
+#define AC97_VENDOR_ID1 0x7c /* Vendor ID1 */
+#define AC97_VENDOR_ID2 0x7e /* Vendor ID2 / revision */
+/* range 0x60-0x6f (page 1) - extended codec registers */
+#define AC97_CODEC_CLASS_REV 0x60 /* Codec Class/Revision */
+#define AC97_PCI_SVID 0x62 /* PCI Subsystem Vendor ID */
+#define AC97_PCI_SID 0x64 /* PCI Subsystem ID */
+#define AC97_FUNC_SELECT 0x66 /* Function Select */
+#define AC97_FUNC_INFO 0x68 /* Function Information */
+#define AC97_SENSE_INFO 0x6a /* Sense Details */
+
+/* volume controls */
+#define AC97_MUTE_MASK_MONO 0x8000
+#define AC97_MUTE_MASK_STEREO 0x8080
+
+/* slot allocation */
+#define AC97_SLOT_TAG 0
+#define AC97_SLOT_CMD_ADDR 1
+#define AC97_SLOT_CMD_DATA 2
+#define AC97_SLOT_PCM_LEFT 3
+#define AC97_SLOT_PCM_RIGHT 4
+#define AC97_SLOT_MODEM_LINE1 5
+#define AC97_SLOT_PCM_CENTER 6
+#define AC97_SLOT_MIC 6 /* input */
+#define AC97_SLOT_SPDIF_LEFT1 6
+#define AC97_SLOT_PCM_SLEFT 7 /* surround left */
+#define AC97_SLOT_PCM_LEFT_0 7 /* double rate operation */
+#define AC97_SLOT_SPDIF_LEFT 7
+#define AC97_SLOT_PCM_SRIGHT 8 /* surround right */
+#define AC97_SLOT_PCM_RIGHT_0 8 /* double rate operation */
+#define AC97_SLOT_SPDIF_RIGHT 8
+#define AC97_SLOT_LFE 9
+#define AC97_SLOT_SPDIF_RIGHT1 9
+#define AC97_SLOT_MODEM_LINE2 10
+#define AC97_SLOT_PCM_LEFT_1 10 /* double rate operation */
+#define AC97_SLOT_SPDIF_LEFT2 10
+#define AC97_SLOT_HANDSET 11 /* output */
+#define AC97_SLOT_PCM_RIGHT_1 11 /* double rate operation */
+#define AC97_SLOT_SPDIF_RIGHT2 11
+#define AC97_SLOT_MODEM_GPIO 12 /* modem GPIO */
+#define AC97_SLOT_PCM_CENTER_1 12 /* double rate operation */
+
+/* basic capabilities (reset register) */
+#define AC97_BC_DEDICATED_MIC 0x0001 /* Dedicated Mic PCM In Channel */
+#define AC97_BC_RESERVED1 0x0002 /* Reserved (was Modem Line Codec support) */
+#define AC97_BC_BASS_TREBLE 0x0004 /* Bass & Treble Control */
+#define AC97_BC_SIM_STEREO 0x0008 /* Simulated stereo */
+#define AC97_BC_HEADPHONE 0x0010 /* Headphone Out Support */
+#define AC97_BC_LOUDNESS 0x0020 /* Loudness (bass boost) Support */
+#define AC97_BC_16BIT_DAC 0x0000 /* 16-bit DAC resolution */
+#define AC97_BC_18BIT_DAC 0x0040 /* 18-bit DAC resolution */
+#define AC97_BC_20BIT_DAC 0x0080 /* 20-bit DAC resolution */
+#define AC97_BC_DAC_MASK 0x00c0
+#define AC97_BC_16BIT_ADC 0x0000 /* 16-bit ADC resolution */
+#define AC97_BC_18BIT_ADC 0x0100 /* 18-bit ADC resolution */
+#define AC97_BC_20BIT_ADC 0x0200 /* 20-bit ADC resolution */
+#define AC97_BC_ADC_MASK 0x0300
+#define AC97_BC_3D_TECH_ID_MASK 0x7c00 /* Per-vendor ID of 3D enhancement */
+
+/* general purpose */
+#define AC97_GP_DRSS_MASK 0x0c00 /* double rate slot select */
+#define AC97_GP_DRSS_1011 0x0000 /* LR(C) 10+11(+12) */
+#define AC97_GP_DRSS_78 0x0400 /* LR 7+8 */
+
+/* powerdown bits */
+#define AC97_PD_ADC_STATUS 0x0001 /* ADC status (RO) */
+#define AC97_PD_DAC_STATUS 0x0002 /* DAC status (RO) */
+#define AC97_PD_MIXER_STATUS 0x0004 /* Analog mixer status (RO) */
+#define AC97_PD_VREF_STATUS 0x0008 /* Vref status (RO) */
+#define AC97_PD_PR0 0x0100 /* Power down PCM ADCs and input MUX */
+#define AC97_PD_PR1 0x0200 /* Power down PCM front DAC */
+#define AC97_PD_PR2 0x0400 /* Power down Mixer (Vref still on) */
+#define AC97_PD_PR3 0x0800 /* Power down Mixer (Vref off) */
+#define AC97_PD_PR4 0x1000 /* Power down AC-Link */
+#define AC97_PD_PR5 0x2000 /* Disable internal clock usage */
+#define AC97_PD_PR6 0x4000 /* Headphone amplifier */
+#define AC97_PD_EAPD 0x8000 /* External Amplifer Power Down (EAPD) */
+
+/* extended audio ID bit defines */
+#define AC97_EI_VRA 0x0001 /* Variable bit rate supported */
+#define AC97_EI_DRA 0x0002 /* Double rate supported */
+#define AC97_EI_SPDIF 0x0004 /* S/PDIF out supported */
+#define AC97_EI_VRM 0x0008 /* Variable bit rate supported for MIC */
+#define AC97_EI_DACS_SLOT_MASK 0x0030 /* DACs slot assignment */
+#define AC97_EI_DACS_SLOT_SHIFT 4
+#define AC97_EI_CDAC 0x0040 /* PCM Center DAC available */
+#define AC97_EI_SDAC 0x0080 /* PCM Surround DACs available */
+#define AC97_EI_LDAC 0x0100 /* PCM LFE DAC available */
+#define AC97_EI_AMAP 0x0200 /* indicates optional slot/DAC mapping based on codec ID */
+#define AC97_EI_REV_MASK 0x0c00 /* AC'97 revision mask */
+#define AC97_EI_REV_22 0x0400 /* AC'97 revision 2.2 */
+#define AC97_EI_REV_23 0x0800 /* AC'97 revision 2.3 */
+#define AC97_EI_REV_SHIFT 10
+#define AC97_EI_ADDR_MASK 0xc000 /* physical codec ID (address) */
+#define AC97_EI_ADDR_SHIFT 14
+
+/* extended audio status and control bit defines */
+#define AC97_EA_VRA 0x0001 /* Variable bit rate enable bit */
+#define AC97_EA_DRA 0x0002 /* Double-rate audio enable bit */
+#define AC97_EA_SPDIF 0x0004 /* S/PDIF out enable bit */
+#define AC97_EA_VRM 0x0008 /* Variable bit rate for MIC enable bit */
+#define AC97_EA_SPSA_SLOT_MASK 0x0030 /* Mask for slot assignment bits */
+#define AC97_EA_SPSA_SLOT_SHIFT 4
+#define AC97_EA_SPSA_3_4 0x0000 /* Slot assigned to 3 & 4 */
+#define AC97_EA_SPSA_7_8 0x0010 /* Slot assigned to 7 & 8 */
+#define AC97_EA_SPSA_6_9 0x0020 /* Slot assigned to 6 & 9 */
+#define AC97_EA_SPSA_10_11 0x0030 /* Slot assigned to 10 & 11 */
+#define AC97_EA_CDAC 0x0040 /* PCM Center DAC is ready (Read only) */
+#define AC97_EA_SDAC 0x0080 /* PCM Surround DACs are ready (Read only) */
+#define AC97_EA_LDAC 0x0100 /* PCM LFE DAC is ready (Read only) */
+#define AC97_EA_MDAC 0x0200 /* MIC ADC is ready (Read only) */
+#define AC97_EA_SPCV 0x0400 /* S/PDIF configuration valid (Read only) */
+#define AC97_EA_PRI 0x0800 /* Turns the PCM Center DAC off */
+#define AC97_EA_PRJ 0x1000 /* Turns the PCM Surround DACs off */
+#define AC97_EA_PRK 0x2000 /* Turns the PCM LFE DAC off */
+#define AC97_EA_PRL 0x4000 /* Turns the MIC ADC off */
+
+/* S/PDIF control bit defines */
+#define AC97_SC_PRO 0x0001 /* Professional status */
+#define AC97_SC_NAUDIO 0x0002 /* Non audio stream */
+#define AC97_SC_COPY 0x0004 /* Copyright status */
+#define AC97_SC_PRE 0x0008 /* Preemphasis status */
+#define AC97_SC_CC_MASK 0x07f0 /* Category Code mask */
+#define AC97_SC_CC_SHIFT 4
+#define AC97_SC_L 0x0800 /* Generation Level status */
+#define AC97_SC_SPSR_MASK 0x3000 /* S/PDIF Sample Rate bits */
+#define AC97_SC_SPSR_SHIFT 12
+#define AC97_SC_SPSR_44K 0x0000 /* Use 44.1kHz Sample rate */
+#define AC97_SC_SPSR_48K 0x2000 /* Use 48kHz Sample rate */
+#define AC97_SC_SPSR_32K 0x3000 /* Use 32kHz Sample rate */
+#define AC97_SC_DRS 0x4000 /* Double Rate S/PDIF */
+#define AC97_SC_V 0x8000 /* Validity status */
+
+/* Interrupt and Paging bit defines (AC'97 2.3) */
+#define AC97_PAGE_MASK 0x000f /* Page Selector */
+#define AC97_PAGE_VENDOR 0 /* Vendor-specific registers */
+#define AC97_PAGE_1 1 /* Extended Codec Registers page 1 */
+#define AC97_INT_ENABLE 0x0800 /* Interrupt Enable */
+#define AC97_INT_SENSE 0x1000 /* Sense Cycle */
+#define AC97_INT_CAUSE_SENSE 0x2000 /* Sense Cycle Completed (RO) */
+#define AC97_INT_CAUSE_GPIO 0x4000 /* GPIO bits changed (RO) */
+#define AC97_INT_STATUS 0x8000 /* Interrupt Status */
+
+/* extended modem ID bit defines */
+#define AC97_MEI_LINE1 0x0001 /* Line1 present */
+#define AC97_MEI_LINE2 0x0002 /* Line2 present */
+#define AC97_MEI_HANDSET 0x0004 /* Handset present */
+#define AC97_MEI_CID1 0x0008 /* caller ID decode for Line1 is supported */
+#define AC97_MEI_CID2 0x0010 /* caller ID decode for Line2 is supported */
+#define AC97_MEI_ADDR_MASK 0xc000 /* physical codec ID (address) */
+#define AC97_MEI_ADDR_SHIFT 14
+
+/* extended modem status and control bit defines */
+#define AC97_MEA_GPIO 0x0001 /* GPIO is ready (ro) */
+#define AC97_MEA_MREF 0x0002 /* Vref is up to nominal level (ro) */
+#define AC97_MEA_ADC1 0x0004 /* ADC1 operational (ro) */
+#define AC97_MEA_DAC1 0x0008 /* DAC1 operational (ro) */
+#define AC97_MEA_ADC2 0x0010 /* ADC2 operational (ro) */
+#define AC97_MEA_DAC2 0x0020 /* DAC2 operational (ro) */
+#define AC97_MEA_HADC 0x0040 /* HADC operational (ro) */
+#define AC97_MEA_HDAC 0x0080 /* HDAC operational (ro) */
+#define AC97_MEA_PRA 0x0100 /* GPIO power down (high) */
+#define AC97_MEA_PRB 0x0200 /* reserved */
+#define AC97_MEA_PRC 0x0400 /* ADC1 power down (high) */
+#define AC97_MEA_PRD 0x0800 /* DAC1 power down (high) */
+#define AC97_MEA_PRE 0x1000 /* ADC2 power down (high) */
+#define AC97_MEA_PRF 0x2000 /* DAC2 power down (high) */
+#define AC97_MEA_PRG 0x4000 /* HADC power down (high) */
+#define AC97_MEA_PRH 0x8000 /* HDAC power down (high) */
+
+/* modem gpio status defines */
+#define AC97_GPIO_LINE1_OH 0x0001 /* Off Hook Line1 */
+#define AC97_GPIO_LINE1_RI 0x0002 /* Ring Detect Line1 */
+#define AC97_GPIO_LINE1_CID 0x0004 /* Caller ID path enable Line1 */
+#define AC97_GPIO_LINE1_LCS 0x0008 /* Loop Current Sense Line1 */
+#define AC97_GPIO_LINE1_PULSE 0x0010 /* Opt./ Pulse Dial Line1 (out) */
+#define AC97_GPIO_LINE1_HL1R 0x0020 /* Opt./ Handset to Line1 relay control (out) */
+#define AC97_GPIO_LINE1_HOHD 0x0040 /* Opt./ Handset off hook detect Line1 (in) */
+#define AC97_GPIO_LINE12_AC 0x0080 /* Opt./ Int.bit 1 / Line1/2 AC (out) */
+#define AC97_GPIO_LINE12_DC 0x0100 /* Opt./ Int.bit 2 / Line1/2 DC (out) */
+#define AC97_GPIO_LINE12_RS 0x0200 /* Opt./ Int.bit 3 / Line1/2 RS (out) */
+#define AC97_GPIO_LINE2_OH 0x0400 /* Off Hook Line2 */
+#define AC97_GPIO_LINE2_RI 0x0800 /* Ring Detect Line2 */
+#define AC97_GPIO_LINE2_CID 0x1000 /* Caller ID path enable Line2 */
+#define AC97_GPIO_LINE2_LCS 0x2000 /* Loop Current Sense Line2 */
+#define AC97_GPIO_LINE2_PULSE 0x4000 /* Opt./ Pulse Dial Line2 (out) */
+#define AC97_GPIO_LINE2_HL1R 0x8000 /* Opt./ Handset to Line2 relay control (out) */
+
diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h
index 15aa5f07c955..89d311a503d3 100644
--- a/include/sound/ac97_codec.h
+++ b/include/sound/ac97_codec.h
@@ -28,6 +28,7 @@
#include <linux/bitops.h>
#include <linux/device.h>
#include <linux/workqueue.h>
+#include <sound/ac97/regs.h>
#include <sound/pcm.h>
#include <sound/control.h>
#include <sound/info.h>
@@ -35,244 +36,6 @@
/* maximum number of devices on the AC97 bus */
#define AC97_BUS_MAX_DEVICES 4

-/*
- * AC'97 codec registers
- */
-
-#define AC97_RESET 0x00 /* Reset */
-#define AC97_MASTER 0x02 /* Master Volume */
-#define AC97_HEADPHONE 0x04 /* Headphone Volume (optional) */
-#define AC97_MASTER_MONO 0x06 /* Master Volume Mono (optional) */
-#define AC97_MASTER_TONE 0x08 /* Master Tone (Bass & Treble) (optional) */
-#define AC97_PC_BEEP 0x0a /* PC Beep Volume (optinal) */
-#define AC97_PHONE 0x0c /* Phone Volume (optional) */
-#define AC97_MIC 0x0e /* MIC Volume */
-#define AC97_LINE 0x10 /* Line In Volume */
-#define AC97_CD 0x12 /* CD Volume */
-#define AC97_VIDEO 0x14 /* Video Volume (optional) */
-#define AC97_AUX 0x16 /* AUX Volume (optional) */
-#define AC97_PCM 0x18 /* PCM Volume */
-#define AC97_REC_SEL 0x1a /* Record Select */
-#define AC97_REC_GAIN 0x1c /* Record Gain */
-#define AC97_REC_GAIN_MIC 0x1e /* Record Gain MIC (optional) */
-#define AC97_GENERAL_PURPOSE 0x20 /* General Purpose (optional) */
-#define AC97_3D_CONTROL 0x22 /* 3D Control (optional) */
-#define AC97_INT_PAGING 0x24 /* Audio Interrupt & Paging (AC'97 2.3) */
-#define AC97_POWERDOWN 0x26 /* Powerdown control / status */
-/* range 0x28-0x3a - AUDIO AC'97 2.0 extensions */
-#define AC97_EXTENDED_ID 0x28 /* Extended Audio ID */
-#define AC97_EXTENDED_STATUS 0x2a /* Extended Audio Status and Control */
-#define AC97_PCM_FRONT_DAC_RATE 0x2c /* PCM Front DAC Rate */
-#define AC97_PCM_SURR_DAC_RATE 0x2e /* PCM Surround DAC Rate */
-#define AC97_PCM_LFE_DAC_RATE 0x30 /* PCM LFE DAC Rate */
-#define AC97_PCM_LR_ADC_RATE 0x32 /* PCM LR ADC Rate */
-#define AC97_PCM_MIC_ADC_RATE 0x34 /* PCM MIC ADC Rate */
-#define AC97_CENTER_LFE_MASTER 0x36 /* Center + LFE Master Volume */
-#define AC97_SURROUND_MASTER 0x38 /* Surround (Rear) Master Volume */
-#define AC97_SPDIF 0x3a /* S/PDIF control */
-/* range 0x3c-0x58 - MODEM */
-#define AC97_EXTENDED_MID 0x3c /* Extended Modem ID */
-#define AC97_EXTENDED_MSTATUS 0x3e /* Extended Modem Status and Control */
-#define AC97_LINE1_RATE 0x40 /* Line1 DAC/ADC Rate */
-#define AC97_LINE2_RATE 0x42 /* Line2 DAC/ADC Rate */
-#define AC97_HANDSET_RATE 0x44 /* Handset DAC/ADC Rate */
-#define AC97_LINE1_LEVEL 0x46 /* Line1 DAC/ADC Level */
-#define AC97_LINE2_LEVEL 0x48 /* Line2 DAC/ADC Level */
-#define AC97_HANDSET_LEVEL 0x4a /* Handset DAC/ADC Level */
-#define AC97_GPIO_CFG 0x4c /* GPIO Configuration */
-#define AC97_GPIO_POLARITY 0x4e /* GPIO Pin Polarity/Type, 0=low, 1=high active */
-#define AC97_GPIO_STICKY 0x50 /* GPIO Pin Sticky, 0=not, 1=sticky */
-#define AC97_GPIO_WAKEUP 0x52 /* GPIO Pin Wakeup, 0=no int, 1=yes int */
-#define AC97_GPIO_STATUS 0x54 /* GPIO Pin Status, slot 12 */
-#define AC97_MISC_AFE 0x56 /* Miscellaneous Modem AFE Status and Control */
-/* range 0x5a-0x7b - Vendor Specific */
-#define AC97_VENDOR_ID1 0x7c /* Vendor ID1 */
-#define AC97_VENDOR_ID2 0x7e /* Vendor ID2 / revision */
-/* range 0x60-0x6f (page 1) - extended codec registers */
-#define AC97_CODEC_CLASS_REV 0x60 /* Codec Class/Revision */
-#define AC97_PCI_SVID 0x62 /* PCI Subsystem Vendor ID */
-#define AC97_PCI_SID 0x64 /* PCI Subsystem ID */
-#define AC97_FUNC_SELECT 0x66 /* Function Select */
-#define AC97_FUNC_INFO 0x68 /* Function Information */
-#define AC97_SENSE_INFO 0x6a /* Sense Details */
-
-/* volume controls */
-#define AC97_MUTE_MASK_MONO 0x8000
-#define AC97_MUTE_MASK_STEREO 0x8080
-
-/* slot allocation */
-#define AC97_SLOT_TAG 0
-#define AC97_SLOT_CMD_ADDR 1
-#define AC97_SLOT_CMD_DATA 2
-#define AC97_SLOT_PCM_LEFT 3
-#define AC97_SLOT_PCM_RIGHT 4
-#define AC97_SLOT_MODEM_LINE1 5
-#define AC97_SLOT_PCM_CENTER 6
-#define AC97_SLOT_MIC 6 /* input */
-#define AC97_SLOT_SPDIF_LEFT1 6
-#define AC97_SLOT_PCM_SLEFT 7 /* surround left */
-#define AC97_SLOT_PCM_LEFT_0 7 /* double rate operation */
-#define AC97_SLOT_SPDIF_LEFT 7
-#define AC97_SLOT_PCM_SRIGHT 8 /* surround right */
-#define AC97_SLOT_PCM_RIGHT_0 8 /* double rate operation */
-#define AC97_SLOT_SPDIF_RIGHT 8
-#define AC97_SLOT_LFE 9
-#define AC97_SLOT_SPDIF_RIGHT1 9
-#define AC97_SLOT_MODEM_LINE2 10
-#define AC97_SLOT_PCM_LEFT_1 10 /* double rate operation */
-#define AC97_SLOT_SPDIF_LEFT2 10
-#define AC97_SLOT_HANDSET 11 /* output */
-#define AC97_SLOT_PCM_RIGHT_1 11 /* double rate operation */
-#define AC97_SLOT_SPDIF_RIGHT2 11
-#define AC97_SLOT_MODEM_GPIO 12 /* modem GPIO */
-#define AC97_SLOT_PCM_CENTER_1 12 /* double rate operation */
-
-/* basic capabilities (reset register) */
-#define AC97_BC_DEDICATED_MIC 0x0001 /* Dedicated Mic PCM In Channel */
-#define AC97_BC_RESERVED1 0x0002 /* Reserved (was Modem Line Codec support) */
-#define AC97_BC_BASS_TREBLE 0x0004 /* Bass & Treble Control */
-#define AC97_BC_SIM_STEREO 0x0008 /* Simulated stereo */
-#define AC97_BC_HEADPHONE 0x0010 /* Headphone Out Support */
-#define AC97_BC_LOUDNESS 0x0020 /* Loudness (bass boost) Support */
-#define AC97_BC_16BIT_DAC 0x0000 /* 16-bit DAC resolution */
-#define AC97_BC_18BIT_DAC 0x0040 /* 18-bit DAC resolution */
-#define AC97_BC_20BIT_DAC 0x0080 /* 20-bit DAC resolution */
-#define AC97_BC_DAC_MASK 0x00c0
-#define AC97_BC_16BIT_ADC 0x0000 /* 16-bit ADC resolution */
-#define AC97_BC_18BIT_ADC 0x0100 /* 18-bit ADC resolution */
-#define AC97_BC_20BIT_ADC 0x0200 /* 20-bit ADC resolution */
-#define AC97_BC_ADC_MASK 0x0300
-#define AC97_BC_3D_TECH_ID_MASK 0x7c00 /* Per-vendor ID of 3D enhancement */
-
-/* general purpose */
-#define AC97_GP_DRSS_MASK 0x0c00 /* double rate slot select */
-#define AC97_GP_DRSS_1011 0x0000 /* LR(C) 10+11(+12) */
-#define AC97_GP_DRSS_78 0x0400 /* LR 7+8 */
-
-/* powerdown bits */
-#define AC97_PD_ADC_STATUS 0x0001 /* ADC status (RO) */
-#define AC97_PD_DAC_STATUS 0x0002 /* DAC status (RO) */
-#define AC97_PD_MIXER_STATUS 0x0004 /* Analog mixer status (RO) */
-#define AC97_PD_VREF_STATUS 0x0008 /* Vref status (RO) */
-#define AC97_PD_PR0 0x0100 /* Power down PCM ADCs and input MUX */
-#define AC97_PD_PR1 0x0200 /* Power down PCM front DAC */
-#define AC97_PD_PR2 0x0400 /* Power down Mixer (Vref still on) */
-#define AC97_PD_PR3 0x0800 /* Power down Mixer (Vref off) */
-#define AC97_PD_PR4 0x1000 /* Power down AC-Link */
-#define AC97_PD_PR5 0x2000 /* Disable internal clock usage */
-#define AC97_PD_PR6 0x4000 /* Headphone amplifier */
-#define AC97_PD_EAPD 0x8000 /* External Amplifer Power Down (EAPD) */
-
-/* extended audio ID bit defines */
-#define AC97_EI_VRA 0x0001 /* Variable bit rate supported */
-#define AC97_EI_DRA 0x0002 /* Double rate supported */
-#define AC97_EI_SPDIF 0x0004 /* S/PDIF out supported */
-#define AC97_EI_VRM 0x0008 /* Variable bit rate supported for MIC */
-#define AC97_EI_DACS_SLOT_MASK 0x0030 /* DACs slot assignment */
-#define AC97_EI_DACS_SLOT_SHIFT 4
-#define AC97_EI_CDAC 0x0040 /* PCM Center DAC available */
-#define AC97_EI_SDAC 0x0080 /* PCM Surround DACs available */
-#define AC97_EI_LDAC 0x0100 /* PCM LFE DAC available */
-#define AC97_EI_AMAP 0x0200 /* indicates optional slot/DAC mapping based on codec ID */
-#define AC97_EI_REV_MASK 0x0c00 /* AC'97 revision mask */
-#define AC97_EI_REV_22 0x0400 /* AC'97 revision 2.2 */
-#define AC97_EI_REV_23 0x0800 /* AC'97 revision 2.3 */
-#define AC97_EI_REV_SHIFT 10
-#define AC97_EI_ADDR_MASK 0xc000 /* physical codec ID (address) */
-#define AC97_EI_ADDR_SHIFT 14
-
-/* extended audio status and control bit defines */
-#define AC97_EA_VRA 0x0001 /* Variable bit rate enable bit */
-#define AC97_EA_DRA 0x0002 /* Double-rate audio enable bit */
-#define AC97_EA_SPDIF 0x0004 /* S/PDIF out enable bit */
-#define AC97_EA_VRM 0x0008 /* Variable bit rate for MIC enable bit */
-#define AC97_EA_SPSA_SLOT_MASK 0x0030 /* Mask for slot assignment bits */
-#define AC97_EA_SPSA_SLOT_SHIFT 4
-#define AC97_EA_SPSA_3_4 0x0000 /* Slot assigned to 3 & 4 */
-#define AC97_EA_SPSA_7_8 0x0010 /* Slot assigned to 7 & 8 */
-#define AC97_EA_SPSA_6_9 0x0020 /* Slot assigned to 6 & 9 */
-#define AC97_EA_SPSA_10_11 0x0030 /* Slot assigned to 10 & 11 */
-#define AC97_EA_CDAC 0x0040 /* PCM Center DAC is ready (Read only) */
-#define AC97_EA_SDAC 0x0080 /* PCM Surround DACs are ready (Read only) */
-#define AC97_EA_LDAC 0x0100 /* PCM LFE DAC is ready (Read only) */
-#define AC97_EA_MDAC 0x0200 /* MIC ADC is ready (Read only) */
-#define AC97_EA_SPCV 0x0400 /* S/PDIF configuration valid (Read only) */
-#define AC97_EA_PRI 0x0800 /* Turns the PCM Center DAC off */
-#define AC97_EA_PRJ 0x1000 /* Turns the PCM Surround DACs off */
-#define AC97_EA_PRK 0x2000 /* Turns the PCM LFE DAC off */
-#define AC97_EA_PRL 0x4000 /* Turns the MIC ADC off */
-
-/* S/PDIF control bit defines */
-#define AC97_SC_PRO 0x0001 /* Professional status */
-#define AC97_SC_NAUDIO 0x0002 /* Non audio stream */
-#define AC97_SC_COPY 0x0004 /* Copyright status */
-#define AC97_SC_PRE 0x0008 /* Preemphasis status */
-#define AC97_SC_CC_MASK 0x07f0 /* Category Code mask */
-#define AC97_SC_CC_SHIFT 4
-#define AC97_SC_L 0x0800 /* Generation Level status */
-#define AC97_SC_SPSR_MASK 0x3000 /* S/PDIF Sample Rate bits */
-#define AC97_SC_SPSR_SHIFT 12
-#define AC97_SC_SPSR_44K 0x0000 /* Use 44.1kHz Sample rate */
-#define AC97_SC_SPSR_48K 0x2000 /* Use 48kHz Sample rate */
-#define AC97_SC_SPSR_32K 0x3000 /* Use 32kHz Sample rate */
-#define AC97_SC_DRS 0x4000 /* Double Rate S/PDIF */
-#define AC97_SC_V 0x8000 /* Validity status */
-
-/* Interrupt and Paging bit defines (AC'97 2.3) */
-#define AC97_PAGE_MASK 0x000f /* Page Selector */
-#define AC97_PAGE_VENDOR 0 /* Vendor-specific registers */
-#define AC97_PAGE_1 1 /* Extended Codec Registers page 1 */
-#define AC97_INT_ENABLE 0x0800 /* Interrupt Enable */
-#define AC97_INT_SENSE 0x1000 /* Sense Cycle */
-#define AC97_INT_CAUSE_SENSE 0x2000 /* Sense Cycle Completed (RO) */
-#define AC97_INT_CAUSE_GPIO 0x4000 /* GPIO bits changed (RO) */
-#define AC97_INT_STATUS 0x8000 /* Interrupt Status */
-
-/* extended modem ID bit defines */
-#define AC97_MEI_LINE1 0x0001 /* Line1 present */
-#define AC97_MEI_LINE2 0x0002 /* Line2 present */
-#define AC97_MEI_HANDSET 0x0004 /* Handset present */
-#define AC97_MEI_CID1 0x0008 /* caller ID decode for Line1 is supported */
-#define AC97_MEI_CID2 0x0010 /* caller ID decode for Line2 is supported */
-#define AC97_MEI_ADDR_MASK 0xc000 /* physical codec ID (address) */
-#define AC97_MEI_ADDR_SHIFT 14
-
-/* extended modem status and control bit defines */
-#define AC97_MEA_GPIO 0x0001 /* GPIO is ready (ro) */
-#define AC97_MEA_MREF 0x0002 /* Vref is up to nominal level (ro) */
-#define AC97_MEA_ADC1 0x0004 /* ADC1 operational (ro) */
-#define AC97_MEA_DAC1 0x0008 /* DAC1 operational (ro) */
-#define AC97_MEA_ADC2 0x0010 /* ADC2 operational (ro) */
-#define AC97_MEA_DAC2 0x0020 /* DAC2 operational (ro) */
-#define AC97_MEA_HADC 0x0040 /* HADC operational (ro) */
-#define AC97_MEA_HDAC 0x0080 /* HDAC operational (ro) */
-#define AC97_MEA_PRA 0x0100 /* GPIO power down (high) */
-#define AC97_MEA_PRB 0x0200 /* reserved */
-#define AC97_MEA_PRC 0x0400 /* ADC1 power down (high) */
-#define AC97_MEA_PRD 0x0800 /* DAC1 power down (high) */
-#define AC97_MEA_PRE 0x1000 /* ADC2 power down (high) */
-#define AC97_MEA_PRF 0x2000 /* DAC2 power down (high) */
-#define AC97_MEA_PRG 0x4000 /* HADC power down (high) */
-#define AC97_MEA_PRH 0x8000 /* HDAC power down (high) */
-
-/* modem gpio status defines */
-#define AC97_GPIO_LINE1_OH 0x0001 /* Off Hook Line1 */
-#define AC97_GPIO_LINE1_RI 0x0002 /* Ring Detect Line1 */
-#define AC97_GPIO_LINE1_CID 0x0004 /* Caller ID path enable Line1 */
-#define AC97_GPIO_LINE1_LCS 0x0008 /* Loop Current Sense Line1 */
-#define AC97_GPIO_LINE1_PULSE 0x0010 /* Opt./ Pulse Dial Line1 (out) */
-#define AC97_GPIO_LINE1_HL1R 0x0020 /* Opt./ Handset to Line1 relay control (out) */
-#define AC97_GPIO_LINE1_HOHD 0x0040 /* Opt./ Handset off hook detect Line1 (in) */
-#define AC97_GPIO_LINE12_AC 0x0080 /* Opt./ Int.bit 1 / Line1/2 AC (out) */
-#define AC97_GPIO_LINE12_DC 0x0100 /* Opt./ Int.bit 2 / Line1/2 DC (out) */
-#define AC97_GPIO_LINE12_RS 0x0200 /* Opt./ Int.bit 3 / Line1/2 RS (out) */
-#define AC97_GPIO_LINE2_OH 0x0400 /* Off Hook Line2 */
-#define AC97_GPIO_LINE2_RI 0x0800 /* Ring Detect Line2 */
-#define AC97_GPIO_LINE2_CID 0x1000 /* Caller ID path enable Line2 */
-#define AC97_GPIO_LINE2_LCS 0x2000 /* Loop Current Sense Line2 */
-#define AC97_GPIO_LINE2_PULSE 0x4000 /* Opt./ Pulse Dial Line2 (out) */
-#define AC97_GPIO_LINE2_HL1R 0x8000 /* Opt./ Handset to Line2 relay control (out) */
-
/* specific - SigmaTel */
#define AC97_SIGMATEL_OUTSEL 0x64 /* Output Select, STAC9758 */
#define AC97_SIGMATEL_INSEL 0x66 /* Input Select, STAC9758 */
--
2.11.0
Robert Jarzmik
2017-06-30 19:44:08 UTC
Permalink
Switch to the new ac97 bus support in sound/ac97 instead of the legacy
snd_ac97 one.

Signed-off-by: Robert Jarzmik <***@free.fr>
---
Since v1: split into 2 patches, the former being XXX ac97 codec agnostic
Since v2: fix driver unregistration
---
sound/arm/Kconfig | 1 -
sound/soc/pxa/Kconfig | 5 ++---
sound/soc/pxa/pxa2xx-ac97.c | 46 ++++++++++++++++++++++-----------------------
3 files changed, 25 insertions(+), 27 deletions(-)

diff --git a/sound/arm/Kconfig b/sound/arm/Kconfig
index 65171f6657a2..f1f25704fe52 100644
--- a/sound/arm/Kconfig
+++ b/sound/arm/Kconfig
@@ -36,7 +36,6 @@ endif # SND_ARM

config SND_PXA2XX_LIB
tristate
- select SND_AC97_CODEC if SND_PXA2XX_LIB_AC97
select SND_DMAENGINE_PCM

config SND_PXA2XX_LIB_AC97
diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
index 823b5a236d8d..72d652572269 100644
--- a/sound/soc/pxa/Kconfig
+++ b/sound/soc/pxa/Kconfig
@@ -19,13 +19,12 @@ config SND_MMP_SOC

config SND_PXA2XX_AC97
tristate
- select SND_AC97_CODEC

config SND_PXA2XX_SOC_AC97
tristate
- select AC97_BUS
+ select AC97_BUS_NEW
select SND_PXA2XX_LIB_AC97
- select SND_SOC_AC97_BUS
+ select SND_SOC_AC97_BUS_NEW

config SND_PXA2XX_SOC_I2S
tristate
diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
index b07d64ef49ba..6f0ea3bf9f75 100644
--- a/sound/soc/pxa/pxa2xx-ac97.c
+++ b/sound/soc/pxa/pxa2xx-ac97.c
@@ -17,6 +17,7 @@
#include <linux/dmaengine.h>
#include <linux/dma/pxa-dma.h>

+#include <sound/ac97/controller.h>
#include <sound/core.h>
#include <sound/ac97_codec.h>
#include <sound/soc.h>
@@ -27,43 +28,35 @@
#include <mach/regs-ac97.h>
#include <mach/audio.h>

-static void pxa2xx_ac97_warm_reset(struct snd_ac97 *ac97)
+static void pxa2xx_ac97_warm_reset(struct ac97_controller *adrv)
{
pxa2xx_ac97_try_warm_reset();

pxa2xx_ac97_finish_reset();
}

-static void pxa2xx_ac97_cold_reset(struct snd_ac97 *ac97)
+static void pxa2xx_ac97_cold_reset(struct ac97_controller *adrv)
{
pxa2xx_ac97_try_cold_reset();

pxa2xx_ac97_finish_reset();
}

-static unsigned short pxa2xx_ac97_legacy_read(struct snd_ac97 *ac97,
- unsigned short reg)
+static int pxa2xx_ac97_read_actrl(struct ac97_controller *adrv, int slot,
+ unsigned short reg)
{
- int ret;
-
- ret = pxa2xx_ac97_read(ac97->num, reg);
- if (ret < 0)
- return 0;
- else
- return (unsigned short)(ret & 0xffff);
+ return pxa2xx_ac97_read(slot, reg);
}

-static void pxa2xx_ac97_legacy_write(struct snd_ac97 *ac97,
- unsigned short reg, unsigned short val)
+static int pxa2xx_ac97_write_actrl(struct ac97_controller *adrv, int slot,
+ unsigned short reg, unsigned short val)
{
- int ret;
-
- ret = pxa2xx_ac97_write(ac97->num, reg, val);
+ return pxa2xx_ac97_write(slot, reg, val);
}

-static struct snd_ac97_bus_ops pxa2xx_ac97_ops = {
- .read = pxa2xx_ac97_legacy_read,
- .write = pxa2xx_ac97_legacy_write,
+static struct ac97_controller_ops pxa2xx_ac97_ops = {
+ .read = pxa2xx_ac97_read_actrl,
+ .write = pxa2xx_ac97_write_actrl,
.warm_reset = pxa2xx_ac97_warm_reset,
.reset = pxa2xx_ac97_cold_reset,
};
@@ -242,6 +235,8 @@ static const struct snd_soc_component_driver pxa_ac97_component = {
static int pxa2xx_ac97_dev_probe(struct platform_device *pdev)
{
int ret;
+ struct ac97_controller *ctrl;
+ pxa2xx_audio_ops_t *pdata = pdev->dev.platform_data;

if (pdev->id != -1) {
dev_err(&pdev->dev, "PXA2xx has only one AC97 port.\n");
@@ -254,10 +249,13 @@ static int pxa2xx_ac97_dev_probe(struct platform_device *pdev)
return ret;
}

- ret = snd_soc_set_ac97_ops(&pxa2xx_ac97_ops);
- if (ret != 0)
- return ret;
+ ctrl = snd_ac97_controller_register(&pxa2xx_ac97_ops, &pdev->dev,
+ AC97_SLOTS_AVAILABLE_ALL,
+ pdata->codec_pdata);
+ if (IS_ERR(ctrl))
+ return PTR_ERR(ctrl);

+ platform_set_drvdata(pdev, ctrl);
/* Punt most of the init to the SoC probe; we may need the machine
* driver to do interesting things with the clocking to get us up
* and running.
@@ -268,8 +266,10 @@ static int pxa2xx_ac97_dev_probe(struct platform_device *pdev)

static int pxa2xx_ac97_dev_remove(struct platform_device *pdev)
{
+ struct ac97_controller *ctrl = platform_get_drvdata(pdev);
+
snd_soc_unregister_component(&pdev->dev);
- snd_soc_set_ac97_ops(NULL);
+ snd_ac97_controller_unregister(ctrl);
pxa2xx_ac97_hw_remove(pdev);
return 0;
}
--
2.11.0
Mark Brown
2017-07-12 10:55:30 UTC
Permalink
Hi Lars, Mark, Charles, Lee,
This is a resend of the v2, with patch 1 added (forgotten in v2). Patch 12 was
slightly modified after module unloading tests, and Dmitry acks were added.
This all looks good to me modulo the naming thing Takashi raised.
Robert Jarzmik
2017-07-12 13:41:51 UTC
Permalink
Post by Mark Brown
Hi Lars, Mark, Charles, Lee,
This is a resend of the v2, with patch 1 added (forgotten in v2). Patch 12 was
slightly modified after module unloading tests, and Dmitry acks were added.
This all looks good to me modulo the naming thing Takashi raised.
Ok Mark, let us do this :
- I'll do some extensive testing this week just to ensure the v4 is on par with
v3 (should be the case but I prefer to be carefull).
- Once I'm sure it's not worse than before, I'll post a v4.

That might give a couple of days to :
- have Lee's ack on patch 6/12

Lee, could you have a look please, that touches your tree, and if you have
concerns I'd rather wait before releasing v4 in order to take them into
account ?

- give Lars another opportunity to complain about what I had forgotten :)
- give me time to retest

Cheers.
--
Robert
Loading...