[PATCH] bus: Convert to using %pOF instead of full_name

[Rob Herring]

Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.

Signed-off-by: Rob Herring <***@kernel.org>
Cc: Maxime Ripard <***@free-electrons.com>
Cc: Chen-Yu Tsai <***@csie.org>
Cc: linux-arm-***@lists.infradead.org
---
drivers/bus/arm-cci.c | 12 ++++++------
drivers/bus/imx-weim.c | 8 ++++----
drivers/bus/sunxi-rsb.c | 22 +++++++++++-----------
3 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c
index c49da15d9790..3c29d36702a8 100644
--- a/drivers/bus/arm-cci.c
+++ b/drivers/bus/arm-cci.c
@@ -2124,8 +2124,8 @@ int notrace __cci_control_port_by_device(struct device_node *dn, bool enable)
return -ENODEV;

port = __cci_ace_get_port(dn, ACE_LITE_PORT);
- if (WARN_ONCE(port < 0, "node %s ACE lite port look-up failure\n",
- dn->full_name))
+ if (WARN_ONCE(port < 0, "node %pOF ACE lite port look-up failure\n",
+ dn))
return -ENODEV;
cci_port_control(port, enable);
return 0;
@@ -2200,14 +2200,14 @@ static int cci_probe_ports(struct device_node *np)

if (of_property_read_string(cp, "interface-type",
&match_str)) {
- WARN(1, "node %s missing interface-type property\n",
- cp->full_name);
+ WARN(1, "node %pOF missing interface-type property\n",
+ cp);
continue;
}
is_ace = strcmp(match_str, "ace") == 0;
if (!is_ace && strcmp(match_str, "ace-lite")) {
- WARN(1, "node %s containing invalid interface-type property, skipping it\n",
- cp->full_name);
+ WARN(1, "node %pOF containing invalid interface-type property, skipping it\n",
+ cp);
continue;
}

diff --git a/drivers/bus/imx-weim.c b/drivers/bus/imx-weim.c
index 4bd361d64270..3d56ebcda720 100644
--- a/drivers/bus/imx-weim.c
+++ b/drivers/bus/imx-weim.c
@@ -156,8 +156,8 @@ static int __init weim_parse_dt(struct platform_device *pdev,

ret = weim_timing_setup(child, base, devtype);
if (ret)
- dev_warn(&pdev->dev, "%s set timing failed.\n",
- child->full_name);
+ dev_warn(&pdev->dev, "%pOF set timing failed.\n",
+ child);
else
have_child = 1;
}
@@ -166,8 +166,8 @@ static int __init weim_parse_dt(struct platform_device *pdev,
ret = of_platform_default_populate(pdev->dev.of_node,
NULL, &pdev->dev);
if (ret)
- dev_err(&pdev->dev, "%s fail to create devices.\n",
- pdev->dev.of_node->full_name);
+ dev_err(&pdev->dev, "%pOF fail to create devices.\n",
+ pdev->dev.of_node);
return ret;
}

diff --git a/drivers/bus/sunxi-rsb.c b/drivers/bus/sunxi-rsb.c
index 795c9d9c96a6..328ca93781cf 100644
--- a/drivers/bus/sunxi-rsb.c
+++ b/drivers/bus/sunxi-rsb.c
@@ -556,20 +556,20 @@ static int of_rsb_register_devices(struct sunxi_rsb *rsb)

/* Runtime addresses for all slaves should be set first */
for_each_available_child_of_node(np, child) {
- dev_dbg(dev, "setting child %s runtime address\n",
- child->full_name);
+ dev_dbg(dev, "setting child %pOF runtime address\n",
+ child);

ret = of_property_read_u32(child, "reg", &hwaddr);
if (ret) {
- dev_err(dev, "%s: invalid 'reg' property: %d\n",
- child->full_name, ret);
+ dev_err(dev, "%pOF: invalid 'reg' property: %d\n",
+ child, ret);
continue;
}

rtaddr = sunxi_rsb_get_rtaddr(hwaddr);
if (!rtaddr) {
- dev_err(dev, "%s: unknown hardware device address\n",
- child->full_name);
+ dev_err(dev, "%pOF: unknown hardware device address\n",
+ child);
continue;
}

@@ -586,15 +586,15 @@ static int of_rsb_register_devices(struct sunxi_rsb *rsb)
/* send command */
ret = _sunxi_rsb_run_xfer(rsb);
if (ret)
- dev_warn(dev, "%s: set runtime address failed: %d\n",
- child->full_name, ret);
+ dev_warn(dev, "%pOF: set runtime address failed: %d\n",
+ child, ret);
}

/* Then we start adding devices and probing them */
for_each_available_child_of_node(np, child) {
struct sunxi_rsb_device *rdev;

- dev_dbg(dev, "adding child %s\n", child->full_name);
+ dev_dbg(dev, "adding child %pOF\n", child);

ret = of_property_read_u32(child, "reg", &hwaddr);
if (ret)
@@ -606,8 +606,8 @@ static int of_rsb_register_devices(struct sunxi_rsb *rsb)

rdev = sunxi_rsb_device_create(rsb, child, hwaddr, rtaddr);
if (IS_ERR(rdev))
- dev_err(dev, "failed to add child device %s: %ld\n",
- child->full_name, PTR_ERR(rdev));
+ dev_err(dev, "failed to add child device %pOF: %ld\n",
+ child, PTR_ERR(rdev));
}

return 0;
--
2.11.0

[Maxime Ripard]

Post by Rob Herring
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.
---
drivers/bus/arm-cci.c | 12 ++++++------
drivers/bus/imx-weim.c | 8 ++++----
drivers/bus/sunxi-rsb.c | 22 +++++++++++-----------

for sunxi-rsb:
Acked-by: Maxime Ripard <***@free-electrons.com>

Maxime